Used Mk2 for sale (245)

Condition: used, Year of construction: 1998, Technical details: Psdpfxeu Idutj Aahegu bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Condition: used, Year of construction: 2005, Serial number: WRA3MMK275CBLxxxx Please contact ATS Norway for more information Please provide reference number upon request: 18527 Specifications: Model year: 2005 Tires: See attached pictures Liftable axle: 1st and 3rd axle Length: 920 cm Width: 248 cm Wheelbase: 137 / 137 cm Curb weight: 7,220 kg Tool cabinet Description:Renders triple cart from 2005.The trailer is EU approved and ready for immediate use.Equipped with lift on the 1st and 3rd axles.Can be delivered quickly. Technical approved: Yes EU-approved until: 16.09.2026 Own weight: 7220 Total Weight: 27000 Pedpfevgy Ezex Aahjgu Payload: 19780 Width: 248 Length: 920 Model: 2005 Renders trippelkjerre

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Manufacturer: DRGM Hässner, quick-change chuck holders 10 pieces -Type: Morse -Receiving sleeves: 3x MK4 / 3x MK3 / 2x MK2 / 2x MK1 -Shipping/Price: complete -Transport dimensions: 320/150/H220 mm Pjdpfx Ajxday Ajahogu -Weight: 14.7 kg

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Podpexl Snuofx Aahegu Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Typ: 2034 Nr. 374, spindle mount: MK 2, Angular milling spindle for Deckel FP1 and FP2, D70, D80 mm, for Deckel milling machines FP1 and FP2. The angular milling spindle is rotatable 360 degrees. The angular milling spindle is used. The spindle is in very good condition. This is an original Deckel angular milling spindle, Type: 2034, No. 374. The spindle has only been used by us for precision work. Pgjdpfsxk T Hiex Aahsu Technical data of the angular milling spindle: Tool milling spindle with MK2 (Morse taper 2) tool holder, for collets: Morse taper 2 with internal thread. The spindle is supplied with a reducing sleeve. Reducing sleeve: (reducing sleeve for FP1) Outside diameter = 80 mm Inside diameter = 70 mm (A reducing sleeve is not required for FP2) Weight: Weight 6.5 kg (tool milling spindle) Weight 0.8 kg (reducing sleeve) Total weight 7.3 kg Price: Ex works Payment: Cash on collection, or payment in advance. Delivery: Shipping by DHL parcel service is possible. Self-collection is possible. Terms of delivery: We deliver according to the Machineseeker standard contract, Standard purchase contract for used machinery from Machineseeker. A standard contract can be downloaded from Machineseeker. Delivery time: Available immediately.

Condition: new, Year of construction: 2025, Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base. Machine description: Durable and stable construction, the bed is made of high quality cast iron. 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque. Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions. Spindle shaft mounted by two angular contact bearings. 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts. Pgedpfx Aaomtyi Nohju Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials. Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed). The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears. Hardened and ground wheels toothed in the spindle gearbox. Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI. With lead screw for threading or automatic longitudinal feed. Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts. The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards. Technical parameters 3-jaw chuck 160mm Max. turning diameter over bed 330mm Max. turning diameter over carriage 220mm Max. detail length in centers 700mm Max. length of the installed part 650mm Bed width 160mm Spindle bore 38mm Spindle taper MK5 Dimensions of lathe post 75 x 75 x 20mm Top slide range 100 (0.05) mm Traverse range 150 (0.1)mm Longitudinal shift range 620(0.5)mm Spindle speeds (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min Number and range of metric threads (17) 0.5-4mm Number and range of inch threads (26) 9-40 TPI Longitudinal autofeed speed 0.105-1.396 mm/rev Auto traverse speeds 0.022-0.296mm/rev Tailstock liner diameter 40mm Trail distance of the tailstock liner 70 (0.025)mm Taper of Tailstock MK2 Engine power 1.1kW / 230V Dimensions L/W/H (with base) 1500 x 730 x 1200mm Weight (with stand) 320 kg Equipment: Lathe base 3-jaw chuck 160 mm Jaws left Fixed Tooth: MK3 Change wheels Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. Pgodpjvxf Irjfx Aahou *

Condition: new, mileage: 260 km, power: 309 kW (420.12 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 34,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2027, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, Internal vehicle number: MK200103 Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SCANIA P 420 B8x4HZ with Meiller three-way tipper * Manufacturer: SCANIA * Model: P 420 B8x4HZ * Axle configuration: 8x4 * GVW: 42 tonnes (permissible total weight) * Unladen weight (chassis with fluids): 10,766 kg * Front axle: 7,238 kg * Rear axle: 3,528 kg * Wheelbase: 4,550 mm / 1,445 mm ----Superstructure – MEILLER Three-way Tipper * Manufacturer: MEILLER Polska * Loading volume: 18.5 m³ * Load bed length: 5,800 mm * Load bed width: 2,300 mm * Drop sides: * Side & rear dropside: mechanically foldable, height 1,500 mm * Front wall foldable, with reinforcement and protection system * Material: HARDOX 400/450 – very robust and wear-resistant * Floor: 8 mm HARDOX * Hydraulics: Meiller with 60 l tank, 275 bar * Special features: * Side flaps, tarpaulin holders, aluminium mudguards, anti-slip floor * Emergency stabilizer, step plates, front spare wheel carrier * External stainless steel flaps, side underrun protection ----Chassis & Technology * Suspension: * Front axle: 3x29 parabolic leaf springs * Rear axles: 2x41 + 2x48 parabolic leaf springs, progressive * Suspension type: fully mechanical (leaf springs) * Steering: Power steering according to 92/62/EEC * Frame class: F958 – heavy-duty design ----Braking system * Type: pneumatic drum brakes on all axles * Brake system: * Brake cylinders: diaphragm + spring mechanism * Electronic braking system EBS with ABS (off-road function) * Additional brake: manual + automatic * Retarder: Not available ----Lighting & Electricity * Headlights: LED * Daytime running lights: LED with parking light function * Fog lights: Halogen * Work lights: pre-wired behind cab * Rear lights: bulb type, mounted on brackets * Sockets: 24V, CB radio with Stabo XM 3004 * Camera system: 2 analogue camera connections pre-installed ----Safety & Systems Psdpow Hi Ahsfx Aahjgu * Driver assistance systems: * ABS Offroad * Hill Hold * Driver Attention Support * VRU CWS/REV – warning system for vulnerable road users (front/rear/side) * Cruise control with map-based speed limit recognition * Tyre pressure monitoring (TPM) for 12 wheels * Locking system: * Remote central locking (433 MHz) * 2 keys * Immobiliser ----Tachograph & Speed * Tachograph: Smart 2 Stoneridge (digital, OTA update capable) * Maximum speed: * Technically: 90 km/h * Limited: 89 km/h ----Cab – Equipment * Cab type: CP17N – short cab * Driver/passenger seat: Medium A / foldable * Seats: XT fabric seats with heating, single seat on passenger side * Dashboard: with chrome trim, vinyl interior panels * Steering wheel: multifunction * Infotainment: * 10.1" interactive display (CID) * CarPlay, AM/FM radio, USB-C, Bluetooth * Air conditioning: automatic * Storage: drawer + storage compartments ----Paintwork * Cab: Cherry Red * Chassis: Sub Grey * MCC (Multi Colour Concept): * Front grille + trim: Black Charcoal * Additional details available on request.

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Quick-change chuck: MK5 shank with 10 arbor sleeves -Receiving sleeves: 2x MK5 / 3x MK4 / 4x MK3 / 1x MK2 -Shipping/Price: complete -Transport dimensions: 340/270/H150 mm Podpfxexdalxs Aahegu -Weight: 29.8 kg/piece

Condition: excellent (used), COURSE ROOM MACHINE Pedpfx Aow S T Iweahjgu For sale is a used Killinger KM 1450 SE wood lathe with a center height of 200 mm. The machine is in excellent condition and has been reconditioned and inspected by our technical staff. (Fully functional) Technical specifications: - Center height: 200 mm - Distance between centers: 720 mm - Spindle thread: M33 x 3.5 with MK2 taper - Speeds: 40 - 3,025 rpm; 40 - 850 rpm; 40 - 1,650 rpm - Indexing feature: 36-step - Motor: 1.5 kW (230V) with high-quality frequency inverter - Weight: approx. 180 kg The lathe is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning chisel, wood turning, turning, machine Reference: KM1450SE

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Pedpfx Aajxhf H Nehjgu Ask us for further information.

Condition: new, Year of construction: 2025, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Pgjdpfjwnb T Ijx Aaheu Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Pjdpfev A S Efjx Aahegu Features: Two-way digital ACU-RIDE display *

Condition: new, mileage: 260 km, power: 309 kW (420.12 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 34,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2027, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, Internal vehicle number: MK200103 Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SCANIA P 420 B8x4HZ with Meiller three-way tipper * Manufacturer: SCANIA * Model: P 420 B8x4HZ * Axle configuration: 8x4 * GVW: 42 tonnes (permissible total weight) * Unladen weight (chassis with fluids): 10,766 kg * Front axle: 7,238 kg * Rear axle: 3,528 kg * Wheelbase: 4,550 mm / 1,445 mm ----Superstructure – MEILLER Three-way Tipper * Manufacturer: MEILLER Polska * Loading volume: 18.5 m³ * Load bed length: 5,800 mm * Load bed width: 2,300 mm * Drop sides: * Side & rear dropside: mechanically foldable, height 1,500 mm * Front wall foldable, with reinforcement and protection system * Material: HARDOX 400/450 – very robust and wear-resistant * Floor: 8 mm HARDOX * Hydraulics: Meiller with 60 l tank, 275 bar * Special features: * Side flaps, tarpaulin holders, aluminium mudguards, anti-slip floor * Emergency stabilizer, step plates, front spare wheel carrier * External stainless steel flaps, side underrun protection ----Chassis & Technology * Suspension: * Front axle: 3x29 parabolic leaf springs * Rear axles: 2x41 + 2x48 parabolic leaf springs, progressive * Suspension type: fully mechanical (leaf springs) * Steering: Power steering according to 92/62/EEC * Frame class: F958 – heavy-duty design ----Braking system * Type: pneumatic drum brakes on all axles * Brake system: Pgodpfx Aasw Hi Auohou * Brake cylinders: diaphragm + spring mechanism * Electronic braking system EBS with ABS (off-road function) * Additional brake: manual + automatic * Retarder: Not available ----Lighting & Electricity * Headlights: LED * Daytime running lights: LED with parking light function * Fog lights: Halogen * Work lights: pre-wired behind cab * Rear lights: bulb type, mounted on brackets * Sockets: 24V, CB radio with Stabo XM 3004 * Camera system: 2 analogue camera connections pre-installed ----Safety & Systems * Driver assistance systems: * ABS Offroad * Hill Hold * Driver Attention Support * VRU CWS/REV – warning system for vulnerable road users (front/rear/side) * Cruise control with map-based speed limit recognition * Tyre pressure monitoring (TPM) for 12 wheels * Locking system: * Remote central locking (433 MHz) * 2 keys * Immobiliser ----Tachograph & Speed * Tachograph: Smart 2 Stoneridge (digital, OTA update capable) * Maximum speed: * Technically: 90 km/h * Limited: 89 km/h ----Cab – Equipment * Cab type: CP17N – short cab * Driver/passenger seat: Medium A / foldable * Seats: XT fabric seats with heating, single seat on passenger side * Dashboard: with chrome trim, vinyl interior panels * Steering wheel: multifunction * Infotainment: * 10.1" interactive display (CID) * CarPlay, AM/FM radio, USB-C, Bluetooth * Air conditioning: automatic * Storage: drawer + storage compartments ----Paintwork * Cab: Cherry Red * Chassis: Sub Grey * MCC (Multi Colour Concept): * Front grille + trim: Black Charcoal * Additional details available on request.

Condition: used, New: No Part suitable for: cars Type number: Astra G 9196701 — OPEL 9202474 — OPEL 92 02 474 — SAAB 95 42 887 — SAAB 9196701 — VAUXHALL OPEL Astra G Cabrio (T98) (Bouwjaar 09.2002 - 10.2005, 125 PK, Diesel) 2.2 DTI (F67), Bouwjaar 09.2002 - 10.2005, 2172 ccm, 125 PK OPEL Astra G Caravan (T98) (Bouwjaar 09.2002 - 07.2004, 117 - 125 PK, Diesel) 2.2 DTI (F35), Bouwjaar 09.2002 - 07.2004, 2172 ccm, 117 PK 2.2 DTI (F35), Bouwjaar 09.2002 - 07.2004, 2172 ccm, 125 PK OPEL Astra G CC (T98) (Bouwjaar 09.2002 - 01.2005, 117 - 125 PK, Diesel) 2.2 DTI (F08, F48), Bouwjaar 09.2002 - 01.2005, 2172 ccm, 117 PK 2.2 DTI (F08, F48), Bouwjaar 09.2002 - 01.2005, 2172 ccm, 125 PK OPEL Astra G Coupe (T98) (Bouwjaar 09.2002 - 05.2005, 125 PK, Diesel) 2.2 DTI (F07), Bouwjaar 09.2002 - 05.2005, 2172 ccm, 125 PK OPEL Astra G Sedan (T98) (Bouwjaar 09.2002 - 01.2005, 117 - 125 PK, Diesel) 2.2 DTI (F69), Bouwjaar 09.2002 - 01.2005, 2172 ccm, 117 PK 2.2 DTI (F69), Bouwjaar 09.2002 - 01.2005, 2172 ccm, 125 PK OPEL Vectra B Sedan (J96) (Bouwjaar 09.2000 - 04.2002, 120 - 125 PK, Diesel) 2.2 DTI 16V (F19), Bouwjaar 09.2000 - 04.2002, 2172 ccm, 120 PK Pedpsxibbrofx Aahegu 2.2 DTI 16V (F19), Bouwjaar 09.2000 - 04.2002, 2172 ccm, 125 PK OPEL Vectra B CC (J96) (Bouwjaar 09.2000 - 07.2003, 120 - 125 PK, Diesel) 2.2 DTI 16V (F68), Bouwjaar 09.2000 - 04.2002, 2172 ccm, 120 PK 2.2 DTI 16V (F68), Bouwjaar 09.2000 - 07.2003, 2172 ccm, 125 PK OPEL Vectra B Stationwagon (J96) (Bouwjaar 09.2000 - 07.2003, 120 - 125 PK, Diesel) 2.2 DTI 16V (F35), Bouwjaar 09.2000 - 04.2002, 2172 ccm, 120 PK 2.2 DTI 16V (F35), Bouwjaar 09.2000 - 07.2003, 2172 ccm, 125 PK OPEL Vectra C Caravan (Z02) (Bouwjaar 10.2003 - ..., 125 PK, Diesel) 2.2 DTI (F35), Bouwjaar 10.2003 - ..., 2172 ccm, 125 PK OPEL Vectra C CC (Z02) (Bouwjaar 08.2002 - ..., 117 - 125 PK, Diesel) 2.2 DTI 16V (F68), Bouwjaar 08.2002 - 06.2008, 2172 ccm, 117 PK 2.2 DTI 16V (F68), Bouwjaar 08.2002 - ..., 2172 ccm, 125 PK OPEL Vectra C Sedan (Z02) (Bouwjaar 04.2002 - ..., 117 - 125 PK, Diesel) 2.2 DTI 16V (F69), Bouwjaar 04.2002 - 12.2004, 2172 ccm, 117 PK 2.2 DTI 16V (F69), Bouwjaar 04.2002 - ..., 2172 ccm, 125 PK OPEL Zafira A (T98) (Bouwjaar 01.2002 - 06.2005, 117 - 125 PK, Diesel) 2.2 DTI 16V (F75), Bouwjaar 01.2002 - 06.2005, 2172 ccm, 117 PK 2.2 DTI 16V (F75), Bouwjaar 01.2002 - 06.2005, 2172 ccm, 125 PK SAAB SAAB 9-3 Hatchback (YS3D) (Bouwjaar 02.1998 - 09.2002, 115 - 125 PK, Diesel) SAAB 9-3 Sedan (YS3F) (Bouwjaar 09.2002 - 02.2015, 125 PK, Diesel) VAUXHALL VAUXHALL Vectra Mk2 (C) Sedan (Z02) (Bouwjaar 04.2002 - 10.2008, 125 PK, Diesel) VAUXHALL Vectra Mk2 (C) Station Wagon (Z02) (Bouwjaar 10.2003 - 07.2008, 125 PK, Diesel) OEM : Article nr.: M261014001-veiling Used injector Opel Bosch

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. Pedpfxjvunrfo Aahjgu - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 spindle turning speed range 50 - 2250 U/min 320 mm 145 mm table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW weight of the machine ca. 90 Kg dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch Podpsupxmrofx Aahogu - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: new, Year of construction: 2025, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Psdpfx Aeud Iztoahjgu Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: good (used), Stock No.: 3031 Manufacturer: Wörner Machine No.: 39135 Type / Model: B13 Drilling capacity: up to 10 mm Spindle mount: MK2 B16x2 Speed range: 560 to 7,000 rpm Stroke: 120 mm Throat: 250 mm Table size: 330 x 430 mm Pjdpfx Aajxfbaaehegu Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table to spindle nose min./max.: 80 / 480 mm Total connected load: kW Accessories/Equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: used, mileage: 2,68,878 km, power: 265 kW (360.30 HP), first registration: 06/2015, overall weight: 28,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, gearing type: mechanical, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, Internal vehicle number: MK200044 More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SERMAC 4Z36 on a Mercedes Benz Arocs 2636 6x4 Concrete pump built in 2015 Chassis built in 2015 3-axle Concrete pump 2634 hours Pgedpfx Aewk St Rsaheu Concrete pump outlet diameter: 180mm Financing example: * Internal number: MK Pump * Purchase price: 158,900.00 € * Down payment: 10% * Term: 60 days * Monthly installment: 2,488.75 € Residual value: €31,780.00 If you like the offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. ...

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch Pedpovupa Rsfx Aahegu - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE Pgjdpfx Aaoud H Hushsu 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch Pgsdpfxsvt Tn Ao Aahou - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm Pgodorif T Dspfx Aaheu MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL Pgjdjrif Tropfx Aahou M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system