Used Mk2 for sale (230)

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M2 Itjdpfx Aasxfgz Ajner -Recording: MK2 -Dimensions: see photos -Dimensions: 255/200/H170 mm -Weight: 7.1 kg

Condition: used, mileage: 1,23,933 km, power: 206 kW (280.08 HP), first registration: 10/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro3, total width: 2,550 mm, total height: 3,200 mm, loading space length: 3,250 mm, loading space width: 2,520 mm, loading space height: 500 mm, Year of construction: 2003, Equipment: ABS, compressor, crane, parking heater, soot filter, MAN LE 18.280 206 kW/280 hp Euro 3 double cab with tipper, 7 seats, auxiliary heating, and loading crane with winch - Vehicle with green environmental sticker (PMK2 diesel particulate filter) ----* Double cab with 7 seats * Wheelbase 4,150 mm * ZF automatic transmission with retarder * MEILLER 3-way tipper with raised bulkhead, rear swing tailgate, and spring-loaded side walls * Tipper dimensions 3,250 mm long x 2,520 mm wide x 500 mm high * Eberspächer warm air auxiliary heating * Winter package with heated driver's seat * Rockinger trailer hitch - towing capacity 8,000 kg, gross combination weight 26,000 kg * Fully automatic BEKA-MAX central lubrication system * Palfinger PK6001 loading crane with hydraulic winch and remote control * 4-piston Parking brake system (also front axle) * 2x orange rotating beacons * Rear axle differential lock Itedpfx Aaswcagpener * Immobilizer * Retarder * ABS, EBS * Cruise control * Electric windows * Electric adjustable and heated exterior mirrors, wide-angle mirror, and curb mirror on the right * Grammer comfort driver's seat with lumbar support and armrests * Passenger double bench seat * Adjustable steering wheel * Autocheck on-board computer * Leaf spring suspension on the front axle - air spring suspension on the rear axle * EC tachograph (leaf) * Electronic immobilizer * Radio with CD player Operating hours: 2,042 BH -----Well-maintained, non-smoking vehicle from a first owner (municipal) in technically and visually sound condition. No rust - ready to use immediately! New oil change and fuel filter, new batteries! Errors and changes excepted!

Condition: used, mileage: 2,29,855 km, power: 107 kW (145.48 HP), first registration: 05/2005, fuel type: diesel, empty load weight: 3,350 kg, maximum load weight: 3,150 kg, overall weight: 6,500 kg, tire size: 225/75R16C, axle configuration: 4x2, wheelbase: 4,250 mm, next inspection (TÜV): 09/2026, color: white, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. Double cab, 1x air-suspended seat, double bench seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, 6-speed manual, ABS (anti-lock braking system), traction control (ASR), PTO, differential lock, fog lights, work lights, rotating beacon, toolbox, leaf suspension, tow ball, towing device, low-noise G1, underride protection, green environmental badge. Wheelbase: 4250 mm. Body: 3t AJK HS3-3150 hook-lift system for city containers up to 3.5m. Euro 3 engine with retrofitted PMK2 diesel particulate filter! Ijdpfjxpizysx Aanjtr Roller height approx. 950 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), COURSE ROOM MACHINE For sale is a used Killinger KM 1450 SE wood lathe with a center height of 200 mm. The machine is in excellent condition and has been reconditioned and inspected by our technical staff. (Fully functional) Technical specifications: - Center height: 200 mm - Distance between centers: 720 mm - Spindle thread: M33 x 3.5 with MK2 taper - Speeds: 40 - 3,025 rpm; 40 - 850 rpm; 40 - 1,650 rpm - Indexing feature: 36-step - Motor: 1.5 kW (230V) with high-quality frequency inverter - Weight: approx. 180 kg The lathe is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning chisel, wood turning, turning, machine Reference: KM1450SE Isdew S T Iwopfx Aanjtr

Condition: new, Year of construction: 2025, Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base. Machine description: Durable and stable construction, the bed is made of high quality cast iron. 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque. Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions. Spindle shaft mounted by two angular contact bearings. 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts. Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials. Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed). The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears. Hardened and ground wheels toothed in the spindle gearbox. Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI. With lead screw for threading or automatic longitudinal feed. Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts. The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards. Technical parameters 3-jaw chuck 160mm Max. turning diameter over bed 330mm Max. turning diameter over carriage 220mm Max. detail length in centers 700mm Max. length of the installed part 650mm Bed width 160mm Spindle bore 38mm Spindle taper MK5 Dimensions of lathe post 75 x 75 x 20mm Top slide range 100 (0.05) mm Traverse range 150 (0.1)mm Longitudinal shift range 620(0.5)mm Spindle speeds (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min Number and range of metric threads (17) 0.5-4mm Number and range of inch threads (26) 9-40 TPI Longitudinal autofeed speed 0.105-1.396 mm/rev Auto traverse speeds 0.022-0.296mm/rev Tailstock liner diameter 40mm Trail distance of the tailstock liner 70 (0.025)mm Taper of Tailstock MK2 Engine power 1.1kW / 230V Dimensions L/W/H (with base) 1500 x 730 x 1200mm Weight (with stand) 320 kg Equipment: Lathe base 3-jaw chuck 160 mm Jaws left Fixed Tooth: MK3 Change wheels Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity Itsdpfx Asmtyi Noanor The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pin stroke ----- 82 mm Spindle mounting ----- MK2 Variable speed Spindle speed 400 ~ 2000 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 1590 mm Weight ----- 74 kg Itsdpfx Aaega T Hcenor Packaging ----- 1150 x 500 x 300 mm INCLUDED * Digital depth stop * Digital spindle display * CE cover * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaption * Driven wedge

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M3 -Recording: MK2 -Dimensions: see photos -Dimensions: 270/230/H180 mm Itjdpfx Ajxfgxzjansr -Weight: 8.5 kg

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Itedpfx Ajxl Snujanjr Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: good (used), Year of construction: 1992, Tool cutter grinder Max. Radius 45 Gr Side X Travel 40 mm Length Y Travel 10 mm Head spindle Z Travel 15 mm Indexing raster 12 x Machine incl. collet device 0,5 to 17,5 mm Milling cutting attachment for Mk1, Mk2, Mk3 incl. HERKT Traunreut Projector for secure grinding incl. HSS Grinding attachment from 3 to 18 mm Grinding wheel Ø:100 x 50 x 20 mm Itodpfsw S T R Ejx Aanor Grinding speeds: 4500Rpm Length: 660mm Width: 570mm Height: 900mm Weight: 190kg

Condition: used, mileage: 2,68,878 km, power: 265 kW (360.30 HP), first registration: 06/2015, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: blue, gearing type: mechanical, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, Internal vehicle number: MK200044 More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SERMAC 4Z36 on a Mercedes Benz Arocs 2636 6x4 Concrete pump built in 2015 Chassis built in 2015 3-axle Concrete pump 2634 hours Concrete pump outlet diameter: 180mm Financing example: Isdpfswk St Rox Aanjtr * Internal number: MK Pump * Purchase price: 158,900.00 € * Down payment: 10% * Term: 60 days * Monthly installment: 2,488.75 € Residual value: €31,780.00 If you like the offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. ...

Condition: new, Year of construction: 2025, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) Itsdpfownb T Iox Aaner 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: like new (used), functionality: fully functional, Year of construction: 1999, operating hours: 24 h, overall weight: 1,200 kg, total width: 1,000 mm, total height: 2,500 mm, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Itodpfeurb R Ejx Aaner Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Manufacturer: DRGM Hässner, quick-change chuck holders 10 pieces Iodpfx Aasxday Aenstr -Type: Morse -Receiving sleeves: 3x MK4 / 3x MK3 / 2x MK2 / 2x MK1 -Shipping/Price: complete -Transport dimensions: 320/150/H220 mm -Weight: 14.7 kg

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Itedpsnzt A Hjfx Aaner Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: good (used), Stock No.: 3031 Manufacturer: Wörner Machine No.: 39135 Type / Model: B13 Drilling capacity: up to 10 mm Spindle mount: MK2 B16x2 Speed range: 560 to 7,000 rpm Stroke: 120 mm Throat: 250 mm Table size: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table to spindle nose min./max.: 80 / 480 mm Itjdpjxfbaajfx Aansr Total connected load: kW Accessories/Equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. Iodpexhf H Njfx Aanjtr The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Ask us for further information.

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth limiter. Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, Iedpfx Aasvzqrzsnstr electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 530mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 380mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W HEIGHT 1120 mm WEIGHT 66kg Manufacturer: Cormak

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 spindle turning speed range 50 - 2250 U/min 320 mm 145 mm table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW weight of the machine ca. 90 Kg Itodeupxmropfx Aanor dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Quick-change chuck: MK5 shank with 10 arbor sleeves -Receiving sleeves: 2x MK5 / 3x MK4 / 4x MK3 / 1x MK2 Ijdpfx Aasxdalxenetr -Shipping/Price: complete -Transport dimensions: 340/270/H150 mm -Weight: 29.8 kg/piece

Condition: like new (used), Year of construction: 2025, functionality: fully functional, DEMONSTRATION MACHINE WOODTURNING DAYS 2025 Itedpfewnqmkex Aanor For sale is an as-new HAGER STAR 200 MAX lathe SET with external turning device. The demonstration machine is in very good condition. Technical Data: - Center height 200 mm - Center distance 640 mm (expandable*) - Stepless speed 300 – 2,900 rpm - Hollow spindle D = 15 mm with internal taper MK2 - Tailstock quill travel 100 mm - Motor 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, woodturning lathe, woodturning, turning chisel, woodturning, turning, machine, Hager Reference: R-A0117 44051+44033

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE Itsdpfxsud H Huo Aaner 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm Itjdsw N Ryxjpfx Aansr -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER STAR 200 MAX lathe with a center distance of 640 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 200 mm - Center distance 640 mm (extendable*) - Stepless speed 300 - 2,900 rpm - Hollow spindle D = 15 mm with inner cone MK2 - Quill travel 100 mm Itjdpfxotpnzds Aansr - Motor 1.5 kW / 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new TEKNATOOL Nova Nebula 230 DVR wood lathe with a direct drive offering speeds from 50 to 4,000 rpm. The demonstration machine is in original condition, so you receive the full warranty. Technical specifications: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove - Spindle and tailstock taper: MK2 - Variable speed control (direct drive): 50 – 4,000 rpm - 24-position indexing - Motor: 1.7 kW / 2.3 HP (230 V) with forward and reverse operation - Tailstock quill travel: 120 mm (with graduated scale and trapezoidal thread) - Machine weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping by freight forwarder: Austria: € 105.00 incl. VAT Iedpfx Aotpph Ssanjtr Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, lathe, turning machine, turning bench, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2022, EXHIBITION MACHINE For sale is a new TEKNATOOL Comet 2 DR lathe including base frame with a maximum center distance of 400 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data: - Center height 150 mm - Center width approx. 400 mm (extendable) - 3 speed levels (belt levels): 250 - 680 / 530 - 1,420 / 1,380 - 4,000 rpm - Digital display for speed - Spindle connection M33x3.5 with ASR (Euro) drain safety groove - Spindle and tailstock MK2 - Motor 0.6 kW / 0.75 HP - Forward / reverse rotation - Knife support 150 mm Iodpfsvbcm Rsx Aanjtr - Weight approx. 32 kg - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, turning machine, turning, turning knife, woodturning, turning, machine