Used Multi Daylight Press for sale (16,493)

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Dcsdpfxoy Umh De Abzoh Control panel Documentation and additional elements included.

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: Djdpjwyc H Tjfx Abzjch - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Dcjdpfey Egkgjx Abzeh Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 99U0686, YEAR OF MANUFACTURE: 11-2019 FEATURES: Dcodezb Ekvopfx Abzjh - BENDING FORCE: 30 TONS - USEFUL LENGTH: 1600 MM - DISTANCE BETWEEN UPRIGHTS: 1200 MM - STROKE: 100 MM - MAXIMUM OPENING: 330 MM - THROAT: 250 MM - TABLE WIDTH: 190 MM - CONTROLLED AXES: 4 - REAR STOPS: 2 - CNC CONTROL - SAFETY LIGHT CURTAINS

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 2 Dsdpfxsyz Slbo Abzech Motor Power: 90 KW

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical data: Press length: max. 2500 mm Press height: max. 1350 mm Working depth: max. 600 mm Pressing time: adjustable The vertical and horizontal press beams are moved electromechanically and interlock with each other; pressure is built up via frequency-controlled geared motors. Dcodpfx Aozbv H Ijbzsh Pressing pressure can be adjusted separately vertically and horizontally. Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, Raimann ProfiRip KM310M Multi-blade Saw Track width: 330 mm Maximum blade spacing: 310 mm Maximum cutting height with moving blade (with clamping): 90 mm Maximum cutting height with moving blade (without clamping): 105 mm Blade size max/min: 300/250 mm Cutting width up to 1000 mm Dcsdpsy Ugk Sofx Abzjh Feed speed up to 30 m/min Automatic material return to the operator

Condition: used, Year of construction: 2000, functionality: fully functional, power: 79 kW (107.41 HP), cutting height (max.): 180 mm, cutting width (max.): 350 mm, Equipment: documentation/manual, Double Multirip Saw Model: PO/560-D In the year of purchase, STORTI had acquired OGAM company, so all machine components except the metal frame were manufactured by STORTI. Min. sawblade diameter: 250mm Max. sawblade diameter: 300mm Dcsdszbh T Tjpfx Abzeh Power: 7.9 kW Max. cutting height: 180mm Max. cutting width: 350mm Max. wood width: 700mm

Condition: ready for operation (used), Year of construction: 1990, We offer this ready for use RAVNE DEE 630 transfer press, year of manufacture 1990. Manufacturer: RAVNE Model: DEE 630 Year of manufacture: 1990 Dcjdpfx Abozbta Sszoh Condition: ready for use Category ID: 1122 Type ID: 1489 Machine type: transfer press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, power: 2.2 kW (2.99 HP), pressing force: 25 t, stroke length: 80 mm, overall weight: 1,300 kg, We offer this used Olympia OAFS eccentric press, year of construction 1974. OLYMPIA 25 Ton Mechanical Eccentric Press Dcsdpfjzbr Stox Abzsh Manufacturer: OLYMPIA (Greece) Technical Specifications: Press Capacity: 25 Tons Stroke: 80 mm Strokes per Minute: 95 Motor Power: 3 HP Machine Weight: Approx. 1,300 kg Description: Very well-maintained OLYMPIA mechanical eccentric press in excellent working condition. The machine is fully operational and can be inspected under power. It has been used in a professional manufacturing environment and has been regularly serviced throughout its working life. The press features a robust cast-iron frame, large working table, foot pedal operation, and centralized lubrication system, ensuring reliable and accurate performance for stamping, punching, blanking, and general sheet metal processing applications. The machine is mechanically sound, ready for immediate production, and requires no known repairs. Features: Excellent working condition Under power Central lubrication system Heavy-duty cast iron construction Foot pedal operation Reliable and easy maintenance Ready for immediate use If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), CATALOGUE NUMBER 7653 Technical data: - track width 240mm - shaft width 260mm - max. disc diameter 300mm - disc bore diameter 70mm - max. cutting height 100mm - table width with clearance 750mm - table length 1530mm - from above: - pawls/deflectors - toothed feed shaft - pawls/deflectors - saw shaft Dedpfxjzadfps Abzoch - sliding/pressure roller - from below: - guide - pawls/deflectors - track - feed motor 2.4kW - main motor 22kW - dust extraction port diameter 2x160mm - overall dimensions (L/W/H) 2000x1530x1720mm - weight approximately 2080kg Net price: 23900 PLN Net price: 5690 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1981, CATALOGUE NUMBER 7651 Technical data: - track width 250mm - roller width 250mm - max. disc diameter 400mm - disc bore diameter 70mm - max. cutting height 120mm - table width with clearance 810mm - table length 1780mm – from above: - feed fingers/ejectors - smooth pressure roller - feed fingers - smooth pressure roller - saw mandrel - 2 smooth pressure rollers – from below: - guide - feed fingers/ejectors - track - central lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 37kW - manual body lifting - manual saw mandrel lifting - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 2150x1480x1760mm - weight 1735kg ADVANTAGES – German production Djdpfozaddlex Abzjch – stepless feed speed adjustment – multi-blade saw, used, very good condition Net price: 46900 PLN Net price: 11167 EUR, depending on an exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication Dodpfxozadate Abzsch - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Dcedpeykl Iaofx Abzeh Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs Dodpfjzab R Njx Abzsch – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm Dcedszab Egopfx Abzoh blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2005, CATALOGUE NUMBER 7905 Technical data: - max cutting height 160mm - max element width 700mm Djdpfx Aozab Dvobzsch - working width of the saw mandrel 600mm - mandrel diameter 70mm - max saw diameter 450mm - from above: - feed pawls - 2 toothed feed mandrels - pressure roller with metal sliding guide - from below: - sliding guide roller - feed pawls - toothed feed mandrel - saw mandrel - smooth feed mandrel - metal sliding guide roller - 6 feed speed settings - feed motor 0.9kW - main motor 45kW - overall dimensions (L/W/H) 1500x1350x2000mm - weight approximately 2695kg ADVANTAGES – Polish production – Robust construction – Used machine, very good condition Net price: 55900 PLN Net price: 13310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Dcedpfx Aszab A Ssbzsh Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls Dcodpfx Abozabx Hszjh - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller – Track chain – Central lubrication – Feed motor 4kW – Main motor 37kW – Stepless feed speed control – Manual body lift Dcsdpfx Abszabu Iozsh – Manual shaft lift (with saw blades) – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with stronger fluctuations)

Condition: excellent (used), Year of construction: 2014, Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Dcedpfxozavhce Abzjh Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side Dsdpfozabclox Abzech - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA Dedpfszabb Usx Abzjch - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Djdszaa Umspfx Abzech Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2008, ECS High Press Year: 2008⁠ ⁠ Max format: 720 x 1020 mm Min format: 350 x 560 mm Gripper : 10 mm Max frame size : 1140 x 1280 mm Adjustment angle: 30 Screen fine adjustment : /- 10 mm Dodottzwmepfx Abzech Max speed : 3300 sh/h. Main power supply: 10KW without YV dryer . Weight: 5500 Kg ECS UV dryer with 2 lamps - year 2002