Used Multi-Stage Press for sale (19,807)

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: Dsdpfjuf Rw Tjx Aptjkt The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure. Djdpfsxrtgfox Aptokt

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Dkodpexrtdqjfx Aptet Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Dkjdpsxrtkwsfx Aptot Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: Dksdpfxoxrtlue Aptet unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Djdpfsxrtb Nex Aptskt Rental or sale EU-wide.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Djdpfxsxrtqwo Aptokt Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Dkedpfeyrf T Eex Aptjt

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 Dkodjv Hchlepfx Aptst 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Dkjdpfxeytgvwj Aptjt Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: ready for operation (used), functionality: fully functional, The MPFSH-075-01 Multi-Fill dosing machine is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruit, surimi, chilled salads, and even cooked meats. Indeed, this machine stands out for its ability to precisely dose difficult-to-handle products while ensuring uniform distribution in different types of containers. Furthermore, the machine is designed to operate efficiently, with optimized air and water consumption, reducing operating costs while ensuring consistent performance. Furthermore, its integration into a production line improves productivity and guarantees high-quality results. Furthermore, this robust machine is suitable for demanding industrial environments, offering a durable solution for the needs of the food industry. In short, the MPFSH-075-01 Multi-Fill dosing machine is essential equipment for companies looking to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical Specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of Manufacture of this Multi-Fill Filling Machine: 2006 Air Consumption: 60 CPM > 80 PSI / 30-35 Cubic Feet/min / 5.5 Bar / 51-60 Nm/hour Water Consumption: 0.75 – 1 Gal/min / 2.8 – 3.8 Liters/min Total Required Frequency with Air Vacuum = 0.45 kW Products Filled: Cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats. HTwLg8C1 Djdpfxewf D Rwo Aptokt

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work stations: 1 Dodpfx Aozxcmueptokt Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Dedpfx Apjzxnggjtokt Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. Dkedpfx Ajq Nf Ensptet 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index Dedpfowfwkwjx Aptjkt - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,700 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 6+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Dksdpfoztpmwox Aptot Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm Dedpfoza Rm Tjx Aptekt 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: used, from a well-known manufacturing plant in Bulgaria. Dkjdpezd Rzqefx Aptjt

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened Dkjdpfeyzpf Eex Aptjt

Condition: new, Big gooseneck press brake punch H250/260/H280mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD L125/250mm Dedpfx Ajiim Ayeptokt

Condition: new, 88 degree standard press brake punch H120mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Dsdpfjiiq H Dex Aptskt

Condition: new, Amada/promecam style Centrical 1V press brake dies for Trumpf Dsdpfxjiqf R Ij Aptjkt

Condition: new, punches and dies for EHT press brake Dkodpfxeiq Dnko Aptet

Condition: new, V65mm/V80mm press brake dies For Trumpf, Bystronic Dkjdpjlkdczsfx Aptot

Condition: new, Hemming tool for Amada/promecam Dedpfx Aoqxq Hbjptjkt