Used Munk Rectifier for sale (140)

Condition: excellent (used), Year of construction: 2014, operating hours: 63 h, functionality: fully functional, fuel type: electric, operation weight: 346 kg, fuel: electricity, IPC GANSOW 1010E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush Ltedpfxov Aa Afe Aanoa NEW side brushes NEW roller rubber guards 65l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for effective, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/003306, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, workpiece width (max.): 3,200 mm, TECHNICAL DETAILS Mobile shoulder opening: 3,200 mm Maximum panel width: 3,200 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Ledpfx Aaoxx N D Hsnjta Edge thickness (coil), minimum PVC-ABS: 0.3 mm Edge thickness (coil), maximum PVC-ABS: 3 mm Feed speed: 10 - 40 m/min Distance between retractable pins: 500 mm EQUIPMENT Motorized pressure rubber belt Support track with retractable pins CNI control unit in a separate control cabinet Rectifier unit with two motors (one for each side) Glue application unit with EVA glue premelter Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapping trimming group Staggered finishing unit with two motors Corner rounding unit with 4 motors Milling unit tiltable 0-90° Edge scraping unit Brushing group

Condition: ready for operation (used), WOKO Electro Magnetic Conveyor Belt Brand: WOKO Length frame A-A = 2600 mm Beltwidth: 1400 mm Ltsdpfxjxdvw Dj Aansa Driving: 4 kW e-motor. Dim. block : 2100 x 1400 x 430 mm Including rectifier.

Condition: used, mileage: 2,65,299 km, power: 302 kW (410.61 HP), first registration: 11/2020, fuel type: gas, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, SCANIA R410 N323 Natural gas retarder * EZ:11.11.2020 * km: approx. 265,289 * R410 * Type:N323 * Automatic * 12742 cubic capacity * Accident damage as shown in the pictures * Retarder * Deutscher LKW / German truck / Niemiecka ci??arówka * 1 Fahrzeughalter / 1 Car owner * 302 KW * 2xbeds * Rear silencer 600 mm * Chassis width 2550 mm * Frame thickness F 800 * Refrigerator * Air conditioning * LNG tank 352 liters & 406 liters * Rain sensor * Wheel formula 4x2 * Suspension leaf / air * ESP * FFU Orlaco camera system * Premium driver's seat * Auxiliary heating * EURO 6 Ledpfx Aeruzykoanota * As you can see in the pictures, the vehicle is damaged. * We can help with loading on the trailer. We can help with loading on the trailer. Mo?emy pomóc w za?adunku. * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing und Finanzierung möglich / Leasing and financing possible * Eigene Werkstatt / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. Lsdpfjwir Daox Aansta * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, Year of construction: 2023, Brand new system stacker with elevating cabin designed for storing and retrieving loads as well as for order picking in very narrow work aisles. Type (group): Order picking (high storage) Operating mode (guidance): Induction loop Year of manufacture: 2023 forklift (in production, delivery May/June) Serial no.: 6959414 Nominal load capacity: 1500 kg Center of gravity: 600 mm Lifting height: 10,250 mm Lifting height (platform): 8600 mm Order picking height: 10200 mm Mast type: Triplex Height of the folded mast: 4460 mm Mast height extended: 11040 mm Total length of the truck (head folded): 3846 mm Forklift width: 1270/ 1520 mm Ground clearance: 60 mm Own weight (without battery): 6790 kg Battery (weight): 1760 kg Turning radius: 1698 mm Working corridor: 1760 mm Distance between shelves: 1850 mm Forks: 1200 mm Ledpfx Ajiyprcsanota Travel speed with/without load: 10/ 12 km (programmable) Lifting/lowering speed: 0.4/ 0.4 m/s Traction battery (acid): TAB Standard 48V8EPZS1240Ah + BFS Rectifier (high efficiency): Polar Q420LOG 24/ 36/ 48V, 20-180A (programming, analytics) Braking system: electro-mechanical Rollers/wheels: Vulkollan (PU) Signal generator (no wiring): included Net price: EUR 97,700 / piece without shipping and assembly/commissioning The narrow aisle forklift comes from the official distributor of Toyota Material Handling Poland. If you are interested, please contact us.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 432 h, functionality: fully functional, overall weight: 346 kg, fuel type: electric, fuel: electricity, IPC GANSOW 1010E SWEEPER NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2013 year of production Machine mileage is 432 hours New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush NEW side brushes NEW roller rubber guards 65l waste containers KEY FEATURES: Lsdjwl Irropfx Aansta Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC Ledpoxx Nf Defx Aanota EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: ready for operation (used), Lenoir Electro Magnetic Conveyor Belt Ltjdexwftuepfx Aanea Brand: Lenoir Dim. Belt Conveyor: A-A = 3000 mm Beltwidth: 1400 mm. Driving: 15 kW Dim. Block : L= 2100 x W=1400  x H=550  mm Including rectifier.

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. The HMI and operating panel is offered in English, German and French. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Grinding wheel width 100 mm Ljdpfx Aaovtl Rpenjta Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: new, Year of construction: 2025, Fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm. Its undoubted advantage is the total height of 1830 mm, which allows easy adaptation to any door. Characteristics of the Q12E25 trolley: The fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm is a unique solution in the field of storage and transport. Its undoubted advantage is not only its impressive ability to lift heavy loads, but also its exceptionally low total height of only 1,830 mm. Regardless of the type of surface, the mast trolley equipped with polyurethane wheels is perfect for various surfaces. These wheels are extremely durable, abrasion-resistant and guarantee smooth and quiet movement of the stroller. An additional advantage of this stroller is the ability to choose from two driving modes. Thanks to this, the operator can adapt the truck to a specific situation and needs, thus increasing his efficiency and precision of work. Regardless of the conditions and requirements, the mast trolley ensures reliability, safety and comfort of use. A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. The mast truck is also equipped with important safety features. The mast trolley is also equipped with a LED battery charge indicator and a "belly" safety switch that prevents it from colliding with the operator. A sealed, maintenance-free AGM battery and a built-in charger with rectifier ensure convenient use and minimize the need for battery maintenance. Additionally, the speed controller ensures safe driving and speed limits, and the turtle driving mode allows precise maneuvering in tight spaces. Lifting and lowering is done electrically under the operator's full control, ensuring precise and safe operations. We do not require technical inspections during the warranty period. Our mast truck is solidly constructed and performs to a high standard, eliminating the need for regular inspections during this time. We are confident that our product will meet your expectations in terms of reliability, performance and safety. WHEELS AND ROLLERS MADE OF POLYURETHANE Rollers of this type are characterized by high abrasion resistance and increased resistance to mechanical damage. They are universal and work perfectly on various types of surfaces. They generate minimal rolling resistance, which makes maneuvering and moving on the surface easier. Technical parameters MAX LIFTING HEIGHT 2500 mm CAPACITY 1200 kg CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 1830 mm HEIGHT OF RAISED MAST 2950 mm HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 790 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5 / 4.0 km/h LIFTING SPEED WITH/WITHOUT LOAD 100/200 mm/s Ltedperh Eybefx Aanja LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW BATTERY CAPACITY 12V 85Ah 2 pcs. WHEEL MATERIAL Polyurethane WEIGHT 450 kg

Condition: excellent (used), Year of construction: 2018, Automatic Galvanizing Barrel Plating Line GALWANOTECHNIKA (2018/2021) Technical Data Summary (Focus on Components and Capacity): ● Machine Type: Automatic Galvanizing Line, Barrel Type (Zn - Zinc Plating). ● Manufacturer: GALWANOTECHNIKA. ● Year of Manufacture: Main structure 2018, significant modernization 2021 (documented). ● Capacity: Approx. 220 tons/month (based on 3-shift operation, suitable for nails/small parts). ● Condition: Complete, operational, and assessed as very good post-modernization. Key Components Included: ● Plating Barrels/Aggregates: 7 units (purchased new in 2021 for nail plating). ● Rectifiers (Total 7 pcs): ○ 6 units x 400A/1700A (Year 2017). ○ 1 unit x 800A (Year 2017). ● Plating/Rinsing Tanks (Total 17 pcs): Includes tanks for galvanizing, cascade rinsing (3- and 2-station), and passivation (Year 2006 per statement). ● Automation: Control Cabinet/Switchboard (Year 2018), Plating Hoists (Year 2016). ● Wastewater Treatment (LPW-ANLAGEN tanks): Scrubber, Fan, and complete Wastewater Treatment Station. ● Auxiliary Equipment (Modernization 2021): Full PE Acid-resistant Drip Tray under the line, Chemical Laboratory with equipment. Lodpfsxm Ttzsx Aanota Commercial Details: ● Documentation: Technical-Operating Documentation (DTR) available.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, working width: 1,080 mm, area performance: 7,560 m²/h, overall weight: 1,385 kg, warranty duration: 12 months, water tank capacity: 260 l, HAKO SCRUBMASTER B260 R WB1080 SCRUBBER NEW HAWKER PERFECT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A CHARGER 2020 production year 1080mm cleaning head (WB1080) equipped with two new medium hardness cylindrical brushes, enabling work on any surface. New rubber squeegees made of high-quality natural rubber New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegees Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 36 V Working width of brushes (mm): 1080 Suction width (mm): 1290 Theoretical efficiency (m²/h): 7560 Tank capacity clean/dirty water (l): 260/260 Number of brushes (pcs): 2 Brush revolutions (rpm): 640 Working speed (km/h): 7 Total weight, ready to work (kg): 1385 DIMENSIONS: Length with squeegee (mm) 2020 Height (mm) 1490 Ltodpfxowtdp Aj Aansa Width with squeegee (mm) 1290 Width without squeegee (mm) 1210 INCLUDED: NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW NEOS 36V 50A RECTIFIER NEW cylindrical brushes 1080mm (x2) NEW suction turbine 36V 700W NEW drain hose NEW suction hose NEW head protection rubbers (x2) Suction bar with new rubbers Tenzi Normal 5L fluid - FREE KEY FEATURES: A 260-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (1080mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: excellent (used), Year of construction: 2015, operating hours: 6,019 h, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, fork length: 1,150 mm, tire condition: 100 %, Equipment: sideshift, Toyota 8FBET 16 Load capacity 1600 year of production 2015 Side shift lift height 3300 mm folded mast 2150 mm Duplex mth 6019 48V battery from 2109 rectifier included 3 wheel Ltedjrwx R Sepfx Aanja

Condition: ready for operation (used), Master Magnets Electro Magnetic Conveyor Belt brand: Master Magnets Limited Length frame A-A = 2200 mm Beltwidth: 950 mm. Driving: 2,2 kW Gearbox Dim. Block : L= 1500 x W=800 x H=570 mm Ljdpfx Asw Dxr Hjaneta Power Block = 2,5 kW Including rectifier.

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Ltodpfx Aewwhn Doansa

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Lsdsv N Hkcspfx Aaneta

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller Ltedpfx Aogrlppoanoa -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Condition: new, Year of construction: 2025, A mast trolley with an electric drive, a load capacity of 1,500 kg and a lifting height of 3,500 mm, is an ideal warehouse device for transporting heavy loads. Solid steel construction ensures stability when lifting. Polyurethane rollers facilitate movement on uneven surfaces. Thanks to this, the mast trolley allows you to quickly and safely move loads at various levels and in various conditions. Introduction to electric mast pallet trucks The CORMAK Q15E35 electric mast lift truck is a versatile and efficient solution for material handling and lifting to a height of 3.5 m. Thanks to its innovative design and advanced technology, this trolley is ideal for use in warehouses, production halls and distribution centers. Key advantages of a pallet lift truck with a capacity of 1,500 kg The technical specifications of this model include the ability to lift to an impressive height of 3,500 mm, which enables efficient manipulation of loads at various levels. The trolley's load capacity is 1,500 kg, which makes it an excellent tool for handling medium and heavier loads. Ltedpfxsrh E D Uo Aanja Machine features A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. Thanks to the use of a special system, the handle of the pallet truck allows the steering to be transferred directly to the wheel. Built-in rectifier. Lifting the forks to the maximum height without load - only 25 seconds! Maintenance-free motor with brushless technology. Battery charge indicator on the control box. Safety switch. Built-in controller protects the battery against discharge or damage. Sealed, maintenance-free AGM battery. WE DO NOT REQUIRE inspections during the warranty period. Technical parameters MAX LIFTING HEIGHT 3500mm CAPACITY 1500 kg CENTER OF GRAVITY 600mm FORK LENGTH 1150mm OUTER FORK WIDTH 570mm HEIGHT WITH FORKS LOWER 2330 mm HEIGHT OF RAISED MAST 4000mm HEIGHT OF LOWER FORKS 85mm TOTAL WIDTH 810mm TOTAL LENGTH 1745mm CLEARANCE 30mm TURNING RADIUS 1390mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5/4 km/h LIFTING SPEED WITH/UNLOAD 140/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 5/7% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING ENGINE POWER 2 kW BATTERY VOLTAGE/CAPACITY 12V 75 I 120 Ah WHEEL MATERIAL Polyurethane LIBRA 586 kg

Condition: ready for operation (used), Year of construction: 1994, Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible. Ltsdpfx Aaoxg Ri Henoa

Condition: ready for operation (used), Wagner Electro Magnetic Conveyor Belt Brand: Wagner Length frame A-A = 2600 mm Beltwidth: 1200 mm Ltsdpfx Ajw Uqh Toanea Driving: 3 kW gearbox Dim. Block : 1600 x 1100 x 600mm Including rectifier.

Condition: excellent (used), Year of construction: 2018, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Ltedewlbxlepfx Aansa Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: ready for operation (used), IFE Electro Magnetic Conveyor Belt Brand: IFE Length frame A-A = 2200 mm Ltsdjw Tr Rtopfx Aansa Beltwidth: 800 mm Driving: 3 kW e-motor Dim. Block : 900 x 900 x 600mm Including rectifier.

Condition: ready for operation (used), Electro Magnetic Block. Brand: Krupp. Dim. Block : L= 1650 x W=1200 x H=600 mm. Power Block = 7 kW, 35 Amp. Ltjdpfx Aaow Dxq Aonea Weightt appr. 3,5 – 4 tons. Including rectifier (new).

Condition: ready for operation (used), Steinert Electro Magnetic Conveyor Belt Brand: Steinert Length frame A-A = 1900 mm Ltodpfx Aaow Tp Ensnja Beltwidth: 900 mm Driving: 2 kW Gearbox Dim. Block : 1000 x 1200 x 500mm Including rectifier.