Used Munk Rectifier for sale (139)

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier Lhedpfx Aaotxkt Dsben -Manufacturer: DETA, charger type E220 G24/70 B-FT -Input voltage: 220 V 50 Hz -Power: 24 V/70 A -Dimensions: 550/410/H780mm -Weight: 79 kg with pallet

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 9,797 h, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, Equipment: cabin, Still RX 20-20P Manufacture date 2006 Load capacity 2000 kg Mth 9797 Electric drive Standard duplex mast Folded height 2100 mm Lifting height 3300 mm Side shift Ledpfx Asunwnlsabehn Superelastic tires Rectifier Cab Lighting

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 Lhedpfx Aasibichjbsn - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening Lhsdpfx Aofguntsabsn depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, mileage: 98,327 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 11/2019, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,080 mm, emission class: euro6, color: red, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Atego 816 air conditioning box * Air conditioning * Cruise control * Box body * Bär Cargolift tail lift Load capacity 1000 kg * Wheelbase: 4220 mm * Engine 5.1 liter - 115 kW diesel (OM 934) * German Truck / Deutscher LKW * 1 Fahrzeughalter / 1 Car owner * Driving assistance system: Brake assist (Active Brake-Assist) * Driving assistance system: Lane departure warning system * Driving assistance system: Stability control assistant * Exhaust emission standard: 6 * Cab: S ClassicSpace * Adblue tank 35 l * Diesel tank 120 l * Immobilizer * Unladen weight: 5715 kg * Tires: 215/75 R 17.5 front 6/6 mm * Rear/back 215/75 R 17.5 7/7/7/7 mm * Sell box body * Loading space length: 6.1 m * Loading space height: 2.08 m * Loading space width: 2.5 m * Before the sale, the HU/SP "TÜV" will be renewed at our expense * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents Ledpfx Aasm Tqhwebohn * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki. * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and don't have the opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, power converter / rectifier. techn. details see photos. Lhsdped Ihaxofx Aabon

Condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier Lhjdpsizk Rtsfx Aabon -Manufacturer: Jungheinrich, charger type Timetronic E230 G 24/65 B-ET -Input voltage: 230V 50-60Hz -Power: 24V/65A -Number: 1x charger available -Dimensions: 500/490/H7355 mm -Weight: 53 kg

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 37 kg, hollow shaft diameter: 40 mm, 3 units available, price per unit! Speed [r/min]: 1415 / 19 Total gear ratio [i]: 72.98 / infinite Max torque Ma [Nm]: 600 Output torque [Nm]: 182 SEW service factor: 3.30 Mounting position IM: M6 Terminal box position [°]/cable entry: 270 (top) / standard Lubricant / quantity [l]: CLP 220 mineral oil / 2.40 Paint finish: Top coat RAL7031 - Blue grey Gearbox: FH57/G Hollow shaft: 40mm Design type: Hollow shaft with shrink disc Additional general features: G rubber buffer Documentation No. A: 26865343, 26883392 Parts list: 422511499 Motor: DRN71M4/BE05/IS/TF/AK8W Motor power [kW]: 0.37 Motor frequency [Hz]: 50 Duty cycle S1-S10: S1 Lhjdpfjwy Umrex Aabjn Motor voltage [V] / connection type: 230/400 delta/star Rated current [A]: 1.78 / 1.02 cos phi: 0.66 Connector circuit diagram: R81 / 680790306 Thermal class [°C]/protection type [IP]: 155(F) / 54 International efficiency class: IE3 Efficiency at 50/75/100% rated load [%]: 74.3 / 77.3 / 77.3 CE marking: Yes IS version: Complete connector Primary connector: IS = integrated connector Primary connector, electrical interface: 6 winding ends customer side; 3-wire supply with swap terminal bridge Primary connector, code: 01IB Brake: BE05 Brake voltage [V]/torque [Nm]: 230 AC / 5 Brake rectifier: BMK1.5 Brake circuit diagram: B121 / 690090206 Fan hood: Metal fan cover Motor protection: TF = PTC thermistor Encoder: AK8W / shaft-centered, friction-locked mounting via tapered shaft Electrical interface: asynchronous, serial RS485 Incremental value: 2048 Absolute value: Singleturn 16 bit + multiturn 16 bit Encoder connection: Integrated encoder connector on encoder cover with terminal lid, no thermal motor monitoring, A1GA Encoder-IS position/cable entry: 270 (top) / standard Encoder version: Supply voltage DC 7-30V Encoder circuit diagram no.: 681810208 Encoder code 1: 03AA20AN60AC Technical data sheet encoder: 63297795 Terminal box lid: IS terminal box cover made of aluminum with threaded holes 1xM25, 1xM12, 1xM20 Documentation No. A: 25957066, 26857987, 26864274 Nameplate: German 1st nameplate set / position: 0° Nameplate language (2nd set): German 2nd nameplate set / position: Supplied loose in plastic bag Operating manual language/quantity: German / 0 Parts list/language/quantity: German / 0 Customs tariff number: 85015100

Condition: refurbished (used), “Steinert UMS 44 130 140 SOND” for Sale Ljdpfeglvwcjx Aabshn Find our complete stock on our website. Manufacturer: Steinert Type: UMS 44 130 140 SOND 14kW / 63,58A. / 220V. – 100% E.D. Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360mm – Conveyor Belt: 1.400mm – AA.: Ca. 2.900mm – Weight: 11 Tons – Transformer rectifier of 380V. Primary

Condition: ready for operation (used), Technical characteristics Forward spped 15m/min Digital control CN7000 ISO, IHM Mécanumeric on mobile panel with 15 inch touchscreen, data entry Ethernet link 500 W direct current servo motorization on the 3 axes Guides by rectified prismatic rails and ball bearing shoes Ball screw transmissions on X1, X2, Y and Z axes Protection of the kinematics of the axes by telescopic bellows on the X, Y, Z axes Aluminum bar support plate Digital Z axis 195 mm Cutting head with sealed CO2 ROFIN SINAR laser including laser, unit of control, cooling, mirrors - Maximum power 360 W Aiming laser Equipment compliant with CE directives following recommendations 2006/42 / CE + 2014/30 / UE + 2006/95 / CE and including : Double safety circuit with standardized relay + shock detector buffers on gantry Course d'axe Y1510 mm Course d'axe X3050 mm Course d'axe Z195 mm Power and Motors Lodpotqkawofx Aabjhn Voltage: 400 V Pluging: Three-phased Power: 27 Kw Overall dimensions

Condition: used, mileage: 2,65,299 km, power: 302 kW (410.61 HP), first registration: 11/2020, fuel type: gas, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, overall weight: 18,000 kg, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, SCANIA R410 N323 Natural gas retarder * EZ:11.11.2020 * km: approx. 265,289 * R410 * Type:N323 * Automatic * 12742 cubic capacity * Accident damage as shown in the pictures * Retarder * Deutscher LKW / German truck / Niemiecka ci??arówka * 1 Fahrzeughalter / 1 Car owner * 302 KW * 2xbeds * Rear silencer 600 mm * Chassis width 2550 mm * Frame thickness F 800 * Refrigerator * Air conditioning * LNG tank 352 liters & 406 liters * Rain sensor * Wheel formula 4x2 * Suspension leaf / air Ljdjruzykepfx Aabehn * ESP * FFU Orlaco camera system * Premium driver's seat * Auxiliary heating * EURO 6 * As you can see in the pictures, the vehicle is damaged. * We can help with loading on the trailer. We can help with loading on the trailer. Mo?emy pomóc w za?adunku. * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing und Finanzierung möglich / Leasing and financing possible * Eigene Werkstatt / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, power converter / rectifier. Lhedpfx Aod Ihaysabsn techn. details see photos.

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB Lhjdpovmpgnefx Aaben -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, total length: 75 mm, total width: 15 mm, Equipment: cooling unit, System components: -Basin -Transport trolley -Filter -Rectifier -Product carrier -2x supply air system -3x exhaust air system -Cooling system Technical data - 1 (line) - 1 X (wet converter) Cr Active - 111 Deco Chrome 112, 113, 114 Free-standing sink 114 Rinsing 116,117,118 Warm rinse 123 Dryer 124, 125, 126, 127 Storage 129 - 141 Unloading correction station 142 - 150 El. stripping 151 - 154 Rinsing 155, 156 Nitric stripping 157 - 161 Rinsing 162, 163 Warm rinse 164 Dryer 165 Storage 166 - 172 Loading correction station 173 - 181 Storage 182 - 209 - - 2 (Line) Rinsing 394, 393 PNS 392 Rinsing 391, 390 MPS 389 Rinsing 388, 387 Free space 386 Satin 385 - 383 Rinsing 382 - 378 Bright NI 377 - 374 Semi-bright 373 - 370 Rinsing 369 - 367 Lhedpfx Asv Ernfsabjn Pickling 366 Anodes 365 - 363 Rinsing 362, 361 Copper 360 - 349 Rinsing 348 - 346 Chem. Ni 345 - 342 Rinsing 341 - 339 Accelerator 338, 337 Rinse 336 - 334 Activate 333 - 330 Pre-diver 329 Rinse 328 - 326 Chrome Red. 325 Rinse 324 - 322 Stand sink 321 Pickling ABSPC 320 -318 Free space 317 Pickling ABS 316 - 314 Rinse 313, 312 Pre-cleaning 311 Dry converter 310

Condition: good (used), functionality: fully functional, overall weight: 4,250 kg, “Steinert UME 110 120 P” for Sale Manufacturer: Steinert Type: UME 110 120 P 6,3 kW / 66,9 A. / 94 V. 100% ED Magnet L x W: 1.206 x 1.150mm Conveyor Belt: 1.200mm (new) Lodpfx Aou S R Ekeabjhn AA.: Ca. 2.100mm Weight: 4,25 Tons With new transformer rectifier of 380V. Primary.

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter Lodpek Rticsfx Aabshn The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: new, Year of construction: 2025, Push feed optimizing saw with automatic loading chain system for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Superpush 250 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Group to move up and down all the loading chain system. The chain system is of high level of quality of size 5/8”. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows Lhodpofhk I Eofx Aabon Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Year of construction: 1975, condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type GFWEA/W 24/70 -Input voltage: 220V 50Hz Lhedsq Davbjpfx Aabon -Power: 25.2V/70A -Dimensions: 555/360/H690 mm -Weight: 55 kg

Condition: new, Year of construction: 2025, Push feed optimizing saw for the complete optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW SuperPush 200 is a true technological evolution of traditional cutting methods. It is able to increase productivity considerably, reduce staff usage to a minimum, and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Special 30° inclined plane to favour the loading and keep the work piece squared. Pusher carriage dimensions mm. 300x345x25. Toothed belt width 50 mm. with 33 steel strips inside. Horizontal deposit/marking plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Lsdpsfg U H Nofx Aabjhn Total optic system. Brushless servo driver motor for the pusher. Intelligent pressure beam. Adjustable cutting speed. RELIABLE AND SAFE Transmission system with sliding on double hardened and rectified guides. “Skf” sliding bearing with double anti-dust protection and automatic lubrication. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Safety closing protection on back side.

Condition: used, Welding inverter, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable:. with electrode clamp -Ground cable -Dimension: 560/290(H500 mm Ledpfx Aaei Agxuobshn -Weight: 44kg

Condition: used, Welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type Origo Arc 410c Lhjdpfx Aashgbxhebjn -Welding power: max. 400 A -Welding cable with electrode clamp -Ground cable -Quantity: 1 piece available -Dimension: 920/720/H930 mm -Weight: 182 kg/pc.

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz Lhsdpfju Rv Sisx Aabsn -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Condition: used, fuel type: electric, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220V 50Hz -Power: 25.2V/90A Ledpfx Aaeiqpx Esbohn -Dimensions: 550/410/H780 mm -Weight: 94 kg

Condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz Lhsdpfjq Dr Skox Aabon -Power: 36V/80A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm Ljdpju Huuusfx Aabshn -Weight: 50 kg