Used Nh 5000 for sale (3,910)

Condition: used, Year of construction: 2022, Duplo booklet maker System 5000 offer consists of: - 3x collators DSC-10/60i - bookletmaker DBM-500 - trimmer DKTS-200 Duplo System 5000 booklet maker 3xDSC-10/60i: collator - number of bins: 30 - paper size: Lsdpfx Apey Uifrodoag width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Lasdsxxu Drjpfx Apdjg

Condition: like new (used), Year of construction: 2022, clamping force: 5,500 kN, Equipment: documentation/manual, HAITIAN JU5500III/2230 – Technical Data Servo Screw diameter: 65 mm Shot volume: 1,068 cm³ Shot weight (PS): 972 g Injection speed: 372 g/s Plasticizing capacity (GPPS): 60.0 g/s Plasticizing capacity (HDPE): 85.7 g/s Max. injection pressure: 212 MPa Injection pressure: 182 MPa Injection stroke: 322 mm Screw speed: 0–225 rpm Heating power: 33 kW Clamping force: 5,500 kN / 550 tons Tie-bar spacing (H × W): 920 × 830 mm Max. mould height: 1,100 mm Min. mould height: 350 mm Mould opening stroke: 1,500 / 750 mm Max. daylight: 1,850 mm Ejector stroke: 350 mm Ledpfxjzx D Hio Apdeag Ejector force: 110 kN Number of ejectors: 21 Pump motor power: 45 + 18.5 kW Oil tank capacity: 640 L Machine dimensions (L × W × H): 8.59 × 2.84 × 2.46 m Machine weight: approx. 22 tons Minimum mould dimensions (L × W): 645 × 580 mm

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Pressing force 250 kN Lodpfx Apszd Akqedeag Installation height: 280 mm Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain hydraulic system revised

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber Laedpfsz A Dxksx Apdeg • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Lajdpfx Apjz A Tgksdsg Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: good (used), Year of construction: 1997, functionality: fully functional, operating hours: 9,350 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 1,140 mm, workpiece weight (max.): 2,000 kg, number of slots in tool magazine: 90, controller manufacturer: Fanuc 15M, total height: 3,930 mm, total length: 7,760 mm, total width: 4,470 mm, overall weight: 22,000 kg, number of spindles: 1, rotary table diameter: 800 mm, spindle nose: MAS 403 BT50, spindle speed (max.): 5,000 rpm, operating hours of spindle: 9,350 h, Equipment: chip conveyor, documentation/manual, Niigata HN 80 C Fanuc 15M 5-Axis horizontal machining centre whit low hours and EXSTENDED AXIS X Y Z Fanuc 15M control travel distance X-axis: 1530mm travel distance Y-axis: 1220mm travel distance Z-axis: 1140mm Pallet width: 800X800mm / 3 palettes Max load 2000kg spindle speed (max.): 5000 rpm Spindle nose MAS 403 BT50 90 pcs of tools in tool magazine True spindle coolant Lsdjt Rgz Tepfx Apdoag Oil mist lubrication of spindle bearings Spindle oil cooler Turn table around Y-Axis diameter 800mm Hydraulic spindle box lightening Automatic power off RS-422 Port Electric pulse handwheel Renisaw MP-7 Probe Post processor for Cam for the software "Autodesk Fusion 360"

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Lsdpfezp R Izex Apdsag delivery time: on request terms of payment: 100% prior to delivery

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Ljdsyk Inpopfx Apdsag Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor Ljdpfxsykpg Hs Apdjag No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lasdpsz A Ialjfx Apdsg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Lodpfxsxxvqaj Apdoag

Condition: used, Year of construction: 1995, Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible. Ljdozyq R Ropfx Apdoag

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Laedpfezwqyysx Apdog Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. Ljdpfx Ajyk Tlajpdsag The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Loading table for sheets of 3000 x 1500. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Lajdezdc Iqspfx Apdeg Always used for thin sheet metal, max. 2 mm. A tapping head TU6 is included, but it displays an error message. Must be sold urgently due to a lack of space.

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 9731, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 55 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 7 m/min, table length: 900 mm, table width: 458 mm, table height: 900 mm, type of input current: three-phase, total height: 1,890 mm, total length: 3,970 mm, total width: 3,740 mm, overall weight: 2,300 kg, input voltage: 380 V, space requirement width: 3,740 mm, space requirement length: 3,970 mm, space requirement height: 1,890 mm, milling spindle length: 75 mm, year of last overhaul: 2015, grinding spindle motor power: 59 W, Equipment: documentation/manual, rotational speed infinitely variable, Control system: HEIDENHAIN TNC 407 Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Arbor stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping area: 900 x 458 mm Laodpozyp Twefx Apdeg Weight: approx. 2300 kg With coolant system, electric handwheel, various tools (without cabinet).

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Laedpozlrc Ssfx Apdsg

Condition: ready for operation (used), functionality: fully functional, The MEYN TH600/5000 industrial fryer is designed for production lines seeking controlled, continuous frying that delivers consistent results and meets industrial throughput requirements. This model integrates seamlessly into food processing operations, especially for coated, breaded, or pre-cooked products. Its continuous design ensures even frying throughout the entire length of the oil bath, maintaining stable product quality—even during extended production runs—while minimizing waste and ensuring process repeatability. The working width and frying length allow for precise control over product dwell time in the oil. Accurate regulation of both time and temperature achieves uniform coloration and consistent texture, resulting in visually uniform products with controlled oil absorption. The industrial design of the fryer enables a continuous product flow, increasing overall line productivity and accommodating both medium and high-capacity production requirements. Constructed entirely from food-grade stainless steel, the fryer offers excellent resistance to thermal stress and frequent washdowns. The MEYN fryer features a proven design recognized throughout the food industry for its long-term reliability. Easy integration into existing lines minimizes infrastructure modifications, reduces downtime, and keeps maintenance straightforward. The MEYN TH600/5000 is thus a strategic choice for food industry operators looking to secure their frying process while optimizing consistency, yield, and product quality. Technical specifications: Year: 1997 Type: Continuous industrial fryer Usable belt width: 600 mm Frying length: 5000 mm Construction: Food-grade stainless steel Ledpfxox Ihivo Apdsag Cooking method: Controlled oil bath Integration: MEYN automatic line Manufactured in: The Netherlands

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine in lovely condition. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Laedpfx Apezgwq Dodeg Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Laedpfx Apexd Awdedeg

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550mm Maximum cutting height: 200mm Saw blade arbor: 30mm Undertable extraction port: 120mm Parallel fence with fine adjustment Fence ruler length: 1200mm, swiveling Extension table: 1250x650mm Cutting length: 2800/3200mm Crosscut fence: 3200mm, swiveling 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, Lajdpfx Aoz Dyfcepdog automatic cutting height correction when swiveling. 3-line LED display for height, angle and speed Circular saw table extension up to 1620mm behind the saw arbor, anodized aluminum On/off switch on the sliding table Sliding table: 3200mm, anodized 10 years Felder warranty on "X-Roll" Swivel mechanism for extension table Cutting width: 1250mm Upper guard cutting width: 1250mm Extraction port: 100mm Electrical system Kappa 550, 3x400V 50Hz CE, 10 KW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick View Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Lodpfx Apoyy Hgqedjag Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Ljdpfxox Tumxo Apdsag

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 1,82,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 1,16,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Lodpfx Apoznlhmedsag