Used Okuma Lu 300 for sale (178)

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Blsdsxxh Udepfx Afhsc Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Bedpfx Afsxxiiishslc Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm Blsdpjxxihfofx Afhsc - Weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2011, Main Drive Bljdpfex Imqfox Afhjc Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Technical Specification Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand OKUMA Model OSP-P200L Main Drive Spindle speed range 38–5000 Spindle bore 100 mm Number of axis 5 Movement X-Axis Movement 580 mm Y-Axis Movement ±80 mm Z-Axis Movement 935 mm W-Axis Movement 1000 mm Workpiece Bjdpjx D Rvhsfx Afholc Workpiece drm over bed 630 mm This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Control Unit Brand OKUMA Model OSP-P300LA Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Blsdox D Rvnspfx Afhjc Movement X-Axis Movement 260 mm Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm Bjdpfx Afox I Nbtjhjlc X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Blodpex D R Uwefx Afhsc Application Types Turning

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: 20,000–24,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in Z-axis movement and locking via M codes. * 12-station turret, all stations live (motorized). Bljdpfsyaxmbsx Afhjc * C-axis. * Y-axis. * Main spindle with built-in motor, 18.5 / 22 kW. * Motor for driven tools: 5.5 kW. * Spindle start-up torque: 620 N·m. * Integrated motor, direct drive without belts or gear steps. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Hardened box ways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turned diameter: 380 mm. * Max turning length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on X and Z axes. * Turret index time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS 232. * Dual pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery subject to prior sale.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: Blsdpjx H Ifbjfx Afhec The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Blsdpfeu U E Avex Afhjc Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) Bsdpfx Afswrr Nhjholc * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 Bsdpfjxxi Uljx Afhelc MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Bodpfxont T Afe Afhjlc Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Blsdpfx Afjnt T Auohsc Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Bsdpfewnqdiex Afhelc Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109566, turning length: 480 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, spindle diameter: 100 mm, Machine with a large V12 turret for L- or M-sized tools and a hydraulic tailstock. TECHNICAL DETAILS Swivel diameter over bed: 530 mm Swivel diameter over longitudinal slide: 530 mm Swivel diameter over cross slide: 410 mm Number of controllable axes: 4 Turning length: 480 mm Turning diameter: 340 mm Speed: 4,500 rpm Spindle diameter: 100 mm Spindle Spindle diameter: 100 mm Spindle head type: JIS A2-6 Taper bore: Ø70 (2.75) x 1/10 mm Spindle bore: 62 mm Spindle speed: 38 - 4,500 rpm Longitudinal slide (Z-axis) Axis stroke: 500 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Axis travel: 280 mm [70 + 210] Feed: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Y-axis Axis travel: +70 to -50 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 10,000 mm/min Turret Type: V12 Number of tools: 12 (L or M tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200 °/min Tailstock & Motor Tailstock spindle diameter: 90 mm Tailstock spindle stroke: 120 mm Bodpjv I Tkaofx Afhslc Spindle drive motor: 15/11 kW (20 min/continuous operation) Longitudinal slide feed (Z-axis): 6 kW Cross slide feed (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Floor area: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm Bedpowq Rpwofx Afhjlc X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE Bodpfx Afsuhbnnshjlc - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Bledpfx Aetqu U Tofhoc Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: ready for operation (used), Year of construction: 2000, operating hours: 30,325 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, controller model: Fanuc OSP-U100M, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 625 mm Spindle speed range: 15,000 rpm Spindle motor power: 15/11 kW Rapid traverse x/y/z: 30 m/min Tool magazine positions: 40 SK40 Pallet size: 2 x 400 x 400 mm Table load capacity: 0.4 t Table indexing: 1° MACHINE DETAILS Control: Fanuc OSP-U100M Total power requirement: 49 kVA Dimensions & Weight Space required: approx. 3.2 x 2 x 2.5 m Machine weight: approx. 11 t Operating Hours Power-on hours: 87,298 h Occupancy time: 73,834 h Cutting hours: 30,325 h Bsdsyc Uquopfx Afhjlc EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 45,000 W, spindle speed (max.): 3,500 rpm, total height: 2,110 mm, overall weight: 7,600 kg, controller manufacturer: OKUMA, controller model: OSP -P200L, product length (max.): 5,330 mm, number of axes: 2, This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine. Bledpfx Afsygxccjhsc • Number of axes: 2 + C • Swing diameter over bed: 620 mm • Swing diameter over saddle: 420 mm • Distance between centers: 1,270 mm • Chuck size: 400 mm • Bar capacity: 80 mm • Turret type: Motorized • Tool stations: 12 positions • X rapid traverse: 20 m/min • Z rapid traverse: 25 m/min • Tailstock spindle taper: MT #5

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 190 mm, controller manufacturer: OKUMA, controller model: OSP-E100L, number of axes: 5, This 5-axis Okuma Macturn 350-W was manufactured in 2004. It features a turning diameter of 530 mm, TL of 1500 mm, and a main spindle with 80 mm diameter and 22 kW power. The machine includes a sub-spindle, 80 tools in ATC, and a B-axis with precise control. Ideal for complex turn-mill operations. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Macturn 350-W machine we have for sale. Contact us for more information. • C-axis: 0.001 deg • Through-spindle coolant • Live tooling speed: 6000 rpm • Sub-spindle speed: 6000 rpm • Coolant pressure: 15 bar • Helical cutting (Macturn) • Linear scales on X and A axes • Autotool changer (ATC) capacity: 80 tools • B-axis: 0.001 deg • Main spindle: 80 mm bore, A2-8 • Sub-spindle: big bore, 5000 rpm, 15 kW • Max turning diameter: 530 mm • Turning length (TL): 1500 mm Additional equipment • Robot interface (Robot IF) • Autodoor • Mayfran chip conveyor, 1200 mm • Robot: ABB IRB6650, 200 kg / 2.75 m Blsdpfx Aoydmfgjfhoc

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Bledpfxox D S Eko Afhjc Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,857 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma MU-400V was manufactured in 2006. It features a spindle drive of 15,000 rpm, a 32-position tool changer, and an internal coolant supply at 15 bar. The machine includes a dual screw chip conveyor, tool breakage monitoring, and an Okuma OSP P200M control system. Ideal for complex machining tasks with its robust 5-axis capability and high-speed operations. Contact us for more information about this machine. Technical Specification Taper Size ISO 40 Bledpfx Ajydcdfsfhoc