Used Okuma Mx 45 Vae for sale (228)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Fodey A Ibhepfx Aa Negb Counter Spindle No Driven Tools Yes Taper Size VDI 50

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 01224, turning diameter over cross slide: 520 mm, turning length: 750 mm, turning diameter: 380 mm, spindle bore: 60 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 20 rpm, overall weight: 5,000 kg, bar diameter (max.): 60 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC control Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Fgjdjy Irfzopfx Aa Njb Turning length: 750 mm Turret: 12 stations Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Including various toolholders Monitor new: flat screen Year of manufacture: 1987 Machine under power. Data sheet, documentation and manuals available Data transfer possible with laptop.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: The machine is in good technical condition, with testing possible by prior arrangement. Control system: OKUMA OSP-P200MA. Power consumption: 58 kVA. Travel distance in X-axis: 1000 mm, Y-axis: 900 mm, Z-axis: 1000 mm. Description: 4 axes. Weight: 26 t. Footprint: 3.3 x 6.5 m. Tool magazine capacity: 100. Tool clamping system: BT50. Machine parameters: Fedpfx Aasy Ehaij Nogb Travels in X, Y, Z axes: 1000 x 900 x 1000 mm.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 Fgedpsy Aaxrsfx Aa Nob • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): Fgsdpfx Asyr Id Hsa Nob - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) Fodpfxsx D Nlzo Aa Negb • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 800 kg, Horizontal Machining Center Okuma Millac 550 H (2-pallet system) For sale: high-performance horizontal machining center Okuma Millac 550 H with dual pallet system. Designed for efficient series production, offering high productivity, reduced downtime and full 4th-axis machining capability. Ideal for demanding machining operations requiring precision and repeatability. Technical specifications: Pallet size: 550 mm Travels: X: 800 mm Y: 800 mm Z: 700 mm A-axis: 360° Spindle taper: BT50 Max. spindle speed: 10,000 rpm Tool magazine: 60 tools Max. workpiece weight: 800 kg Machine in very good technical condition, ready for operation. Fodpfxjyw Rlxs Aa Nsgb

Condition: good (used), Year of construction: 2000, Technical details: turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 rpm travel -x axis 300 mm Fsdpfx Aasyzy Ukj Nsgb travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Spindle hours: 16.653 hrs. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck Fgsdpfsy Drunsx Aa Nsb 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, OKUMA OSP-P300M control Table dimensions: 1300 x 560 mm Maximum table load: 900 kg X-axis travel: 1050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Spindle speed: 12,000 rpm SIM: SK50 Magazine capacity: 32 Power consumption: 22.2 kVA / 400V Total weight: 7700 kg Dimensions (L x W x H): 2900 x 2450 x 2900 mm Accessories and equipment: - Chip conveyor - Coolant system Fgjdjyvr N Njpfx Aa Njb - Transformer - Some tool holders with drawbars - Spindle cooler - Lifting hook - Manuals The machine is being sold due to company closure.

Condition: used, Year of construction: 2008, 2008 Okuma LB3000 EX CNC Lathe with Driven Tooling and Okuma OSP-P200L Control Fjdpfx Aoy Dr I Ioa Njgb Max. turning ø340mm. Max. turning length: 1,000mm. Swing over bed: 580mm. Swing over carriage: 470mm. Spindle bore: ø80mm. Spindle capacity: ø120mm. Spindle speed: 45–5,000 rpm Z-axis: 1,065 mm. Y-axis: 260mm. Turret: 12-station (all driven tooling). Driven tool speed: 45–6,000 rpm. C-axis: 360° indexing. Tailstock: MT5. Spindle motor power: 22 kW. S/No. 141960 (2008) Machine weight: 6,150 kg. Overall dimensions (L x W x H): 3,500 x 1,900 x 2,000mm. Includes swarf conveyor: Approx. 4,700 x 600 x 1,500mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 515 mm, turning diameter: 520 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 565 mm, overall weight: 4,400 kg, One-Touch IGF (soru-cevap diyalog programlama özelliği var) 2024 model OKUMA LB3000EXII CNC TORNA KONTROL OSP-P300LA KATALOGUNU EKLEDİK İNCELİYEBİLİRSİNİZ. 2 EKSEN ÇEVİRME ÇAPI 520 MM İŞLEME ÇAPI 410mm İŞLEME BOYU 515 mm Fgsdpfx Ajywhfiea Neb FENERMİLİ DELİK ÇAPI 66 mm PUNTA KONİGİ MT-5 PROGRAMLI PUNTA VAR 5000 DEVİR AGIRLIGI 4400 KĞ Almanya ve Fransa' da referans verebiliriz.

Condition: used, Year of construction: 2014, OKUMA - LB3000 EXII - 2014 - control system OSP-P300L CNC with 15" color touch screen - Power on time: 65,458 h - as of 18.03.2026 NC time in operation: 36,054 h - spindle rotation time: 19,533 h - time in cut 16,582 h - power consumption 33.1 kVA Technical data - max. rotating diameter 480 mm - max. machined diameter 340 mm - max. turning length 785 mm - collet + 10“ hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) - 1x hard jaws (Schunk SHB-J 100) - hydraulic through-cylinder SS 1770, draw tube Main spindle - spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor - speed ​​range 45 - 5,000 rpm - 22 kW/15 kW - continuously controlled C-axis, 3600 with 0.001° increments Sub-spindle - speed ​​range 50 - 6,000 rpm - 11 kW/7.5 kW - spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor - continuously controlled C-axis, 360° with 0.001° increments - collet + 6“ hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) - hydraulic through-cylinder SS1243, draw tube - travel of the secondary spindle - NC axis W stroke for W450: 595mm - spring-loaded piece ejector from the counter spindle - overload monitoring of the W axis (drive torque) Clamping of the center (tailstock) in the secondary spindle Turret head - number of tool positions 12, fixed and driven BMT60 (not VDI) - tool clamping in. 25 x 25 mm - tool clamping out. dia. 40 mm Driven tools - drive power 7.1/4.1 kW - speed ​​range 45 – 6,000 min-1 Travel speeds - rapid traverse in X and Z axes 25/30 m/min. - rapid traverse in C axis 200 rpm. Travels - X axis 260 mm - Z axis 510 mm - Y axis 115 mm (+70 mm / -45 mm) Machine data - width 3330 mm – without feeder and conveyor - depth 1800 mm - height 2250 mm - machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E set containing: - coordinate transformation function - profile generation function Fgjdpfx Aaoyzkn Uo Nsb - advanced One Touch IGF - 3D machining process simulation - machining time overrun control - load monitoring (spindle, feed axes) - NC operation monitoring (including piece counting) - cycle time reduction function - Hi-Cut Pro function - spindle speed control function - high-pressure coolant, max. 20 bar, max. 50l/min - ILS material feeder type MUK 7012, with bar magazine 6-70 mm/1250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - FILTERMIST FX4002 extraction Machine equipment: - collet holder: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) - collet dia.(mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - collet with groove dia.(mm) 55-60-65 - collet holder: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the secondary spindle) - collets dia.(mm): 6-28, 30-32, 34-36, 39-41 Holders: - axial holder - 5x - knife holder - 5x - holder on the blade - 2X - front double-sided chaser - 3X - transverse chaser - 3X - reducing insert tube (production from the meter) - reduction - silon dia.(mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Condition: used, Horizontal machining center, 6 pallets Priced to sell - dismantled and loaded into truck OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. Fodet Ek Slspfx Aa Njgb 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Fgsdpfeyyk I Ejx Aa Njb Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Fgodpeyt Nvtjfx Aa Neb Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1250 / 660 / 540 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 32 [mm/min] - Cutting feed rates (X/Y/Z) : 32 [m/min] A ROTARY AXIS - Travel : [°] Fgjdpfx Aasy Er Hye Nob - C ROTARY AXIS - Speed : 1000 [rpm] - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TABLE - Maximum workpiece diameter : 730 x 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 127 - 660 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.940 x 3.367 [mm] - Machine height : 3.541 [mm] - Machine weight : 13.000 [kg] MACHINE HOURS - Number of hours under power : 57.114 [h] - Number of working hours : 23.087 [h] EQUIPMENT - CNC : OSP-P200M - Turning option - Coolant tank * with paper filtering unit - Coolant through spindle - Chips conveyor - Oil mist extractor : LOSMA - Spindle cooling unit - Tool probe : RENISHAW TS27R - Workpiece probe : RENISHAW OMP60

Condition: good (used), Parts shown by hand not come. Fgedpsyb R Erofx Aa Nob

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Fodpfx Aajyxmyuo Nogb Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Fodpjyluviofx Aa Nogb Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LU35-M-2ST-600 Control: OSP-P200L Year of manufacture: 2008 Internal machine no.: 25 Fodjyliquopfx Aa Nsgb Max. turning diameter: 550 mm Max. turning length: 600 mm Spindle bore: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A turret: 12 stations (all driven) B turret: 10 stations Toolholder: VDI 50 Accessories Schunk chuck NC Rota 500 Interlit chip conveyor Including external coolant system Door automation Touch setter

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations driven) Touch setter IGF Chip conveyor Bar feeder, 3.00 m Fsdeyli Akopfx Aa Nogb Main spindle collet chuck Sub spindle 3-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Fodpsyk Uimjfx Aa Negb Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter Fjdpjylkgqjfx Aa Nogb 3-jaw chuck (Kitagawa B212)

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Fgjdpfx Aoyk Tbhsa Neb Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared