Used Painting Table for sale (19,717)

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm Ncsdpexabl Sofx Ag Njn table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Ncedpfxoxaatne Ag Non - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. Ncodpfoxaafqex Ag Nsn - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Ncjdsw R Syijpfx Ag Njn

Condition: defective spare-parts repository (used), Year of construction: 2004, operating hours: 21,120 h, functionality: limited functionality, total height: 2,200 mm, total length: 3,400 mm, total width: 2,410 mm, type of input current: three-phase, overall weight: 4,000 kg, control cabinet height: 2,000 mm, control cabinet length: 500 mm, control cabinet width: 1,200 mm, Equipment: documentation/manual, emergency stop, lighting, Tecno5 RC 693 printing machine Dimensions (L x W x H): 340 x 241 x 220 cm Year of manufacture: 2004 Country of origin: Italy Manufacturer: Tecno5 Spa • Loading conveyor: 210 x 80 x 65 cm • Unloading conveyor: 195 x 50 x 25 cm • Electrical cabinet. Dimensions: 200 x 50 x 120 cm • Accumulation table (green) - 400 x 140 (wide section) and 75 cm (belt) x 150 cm Ncjdpfx Agjyh Uhbj Non • Accumulation table (blue) - 400 x 150 (wide section) and 75 cm (belt) x 150 cm • Additional conveyor to storage table: 100 x 70 x 85 cm • Installation equipment (cables + mechanical parts + vacuum installation)

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Ncjdpfx Aeyg Iu Ieg Nen Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: like new (used), Year of construction: 2022, operating hours: 2,700 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,000 rpm, total height: 4,600 mm, total length: 7,200 mm, total width: 6,050 mm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 800 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, workpiece weight (max.): 12,000 kg, overall weight: 35,000 kg, Equipment: cabin, WHN 13 P CNC machine, completely overhauled and modernized by Fermat. Equipped with HEIDENHAIN TNC 640 control system with handwheel. The machine features high-pressure through-spindle tool cooling. ISO 50 spindle taper. The machine is connected to power and can be tested under working conditions. It is in like-new technical condition, manufactured in 2022, with 2,700 operating hours. Nodpfx Ajyk S Slog Necn

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 1,400 mm, total height: 850 mm, TOP Work Table AT 1400 with Stainless Steel Top Work Table / Baker's Table Stainless steel work surface with rear upstand Bottom shelf Stainless steel construction with 2 doors Dimensions approx.: 1400 x 800 x 850 mm (W x D x H) Nodpfx Agoykig To Nocn Used unit, cleaned Option: Delivery service

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Ncedpfoykifpex Ag Njn Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, input voltage: 230 V, ambient temperature (min.): 15 °C, electrical fuse: 10 A, input frequency: 50 Hz, ambient temperature (max.): 38 °C, total length: 680 mm, total width: 1,300 mm, type of cooling: air, Coldline Master GN 2 Refrigerated Table For quick and flexible use Ncedpfx Aoykibdjg Nsn Model: TS13/1M-760 Stainless steel construction Cooling range: -2 to +8°C, adjustable Circulated air cooling Ready-to-plug-in unit, 2-door Connection: 230V Dimensions: 1300 x 680 x 860 mm (W x D x H) Used equipment Options: Grids / trays Pair of support rails Maintenance contract Service package Delivery service Instruction & commissioning Many more refrigeration units available from us!

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Nedpfx Agswv E Nij Necn

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Nodsyi A Tdepfx Ag Necn

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° Nsdpjg Dgr Hofx Ag Nocn digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed Ncodpjgvvn Eefx Ag Nen dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. Nsdpfxehby Ris Ag Njcn It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 Nsdpjcrnm Nofx Ag Njcn scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, Nsdpfx Ajiz Aufeg Necn M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Nedsmmb Acopfx Ag Necn

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Ncsdpeh Ucqtefx Ag Njn Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2011, functionality: fully functional, load capacity: 1,000 kg, Equipment: foot remote control, 3-axis height-adjustable welding positioner, load capacity approx. 1.5 tons ESAB PEMA TAB 1 T-STD Year of manufacture: 2013 All functions continuously adjustable, incl. hand and foot remote control. Technically and visually in excellent condition Table diameter: 900 mm Speed: 0.12 to 1.2 rpm Tabletop tilting range: 0 - 135° Boom tilting range: 45° Min. height: 450 mm Max. height: 1358 mm Total power requirement: 0.75 kW Max. current transmission: 800 amperes Njdeyi E Nnepfx Ag Njcn Dimensions: L x W x H: 2.1 m x 1.7 m x 1.6 m Weight: approx. 1000 kg

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Njdpfxom Tv Azo Ag Njcn Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, BRAND NEW NC ROTARY TABLES Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Njdpfom Tvz Dox Ag Nocn Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: excellent (used), functionality: fully functional, Stainless Steel Work Table AT 3500 with Beech Wood Worktop and Rear Gallery 2 x Stainless Steel Sliding Doors with Shelving Drawer Block on the Left Door with Shelf Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Ncsdpfx Ajrhd Udeg Non Top sanded & freshly oiled Delivery service available Many more work tables in stock!

Condition: used, functionality: fully functional, NIKKEN CNC rotary table CNC 320V, Series 400V - Faceplate Ø320 mm - Spindle bore Ø80 mm - Center height 230 mm - Siemens motor Ncodpfx Agoymyh Te Njn

Condition: used, Year of construction: 2001, functionality: fully functional, HAAS CNC Rotary Table (Rotary Axis) HRT160B - Worktable diameter: 160 mm - Year: 2001 - Includes tailstock HTS5 - Includes counter bearing with Ø40 mm mount Ncedpfx Agoymx Ilj Njn - Includes Kitagawa 3-jaw chuck Ø190 mm - Includes chuck key