Used Pellet for sale (296)

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. Isdpfxowp Rqfo Aabetn The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Ražotājs: Munch Modelis: 420 Ijdpfx Aaowfqn Asbstn Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Itjdpfx Asw Ry U Isabon

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Iedpfx Asud Nx Heabetn Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: excellent (used), Year of construction: 2010, 153 USED PWSB Bakery Oven, Wood-Fired, Pellet-Fired. Year of manufacture: 2010. TECHNICAL DATA: - Number of chambers: 3, - Ceramic-lined baking chamber, - 6 pellet burners (2 per baking chamber). EXTERNAL DIMENSIONS (in cm) - Width: 300, - Depth: 400 (including burners) - Height: 290, Pellet hopper: - Capacity: approx. 8-10 tons, - Height: 700, - Diameter: 270 cm. CHAMBER DIMENSIONS (in cm) - Width: 180, - Depth: 200. Ijdpsxfkx Eofx Aabjtn We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), input frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Itjdpfx Aaexclitobjn

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. Itsdpeit I Rtofx Aabon - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Isdjxcy D Espfx Aabetn Moisture meter

Condition: refurbished (used), functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, High-Performance Pellet Mill – Available Immediately! We offer a fully refurbished pellet mill in excellent condition, ideal for both laboratory and production applications. This machine combines quality, safety, and ease of operation. Technical Data: • Motor: 15 kW / 400 V (three-phase) • Maximum current: 63 A • Die type: Vertical • Die diameter: 200 mm • Maximum die thickness: 35 mm • Die hole diameter: 3–20 mm • Number of rollers: 2 units • Roller diameter: 96 mm Performance: • Softwood: 150–180* kg/h • Hardwood: 120–150* kg/h Weight: 1,050 kg Dimensions (mm): Length 1,590, Width 1,200 Height (mm): 2,200 Condition: Excellent condition, primarily used for laboratory testing. Refurbished for sale purposes. Scope of delivery includes: • Shear pin and reinforcement ring for press protection in case of overpressure • Die and rollers • Miscellaneous accessories Extras (not included in the price): Itodpfx Ajw R Rtusabon • Transport of the press • On-site training and commissioning • Pelletizing test with your own material

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, 1. Material feeding table with moving chain mechanism. Height adjustable: min 0.8m, max 1.4m, equipped with electric drive. 3kW, length 4m. 2. Large roller shredder with double blades, blade diameter 1.8m, depth 1.9m. 380V, 30kW. 3. Connection point with locking mechanism for bulk material feeding to the crushing mill. 4. Hammer mill turbine, 380V, 35kW. 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume: 4.8m³, 380V, 2.2kW. 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Includes additional cooling for granulator rings and fine dust extraction. Maximum capacity 3T/h, 380V, 90kW. Itedpsw U Ugmjfx Aabon 7. Small mobile conveyor belt. Width 38cm, length 2m, 380V, 0.5kW. 8. Large transport conveyor with head valve. Width 38cm, length 6m, 380V, 1.5kW. 9. Pellet cooler with cyclone for fine dust collection and head valve. Maximum capacity 3.5T/h, 380V, 3kW. 10. Screener/vibrating table with screenings collector and screw feeder. 380V, 1.5kW. 11. Long rotary drum screener with screening mesh. Length 3m, 380V, 1.5kW. 12. Conveyor belt for feeding to packaging. Length 4.2m, 380V, 0.75kW. 13. BIG BAG packaging unit with calibrated scales (accuracy +/- 5g per 1T). 14. Screw conveyor for feeding material to the automatic bag packing machine. Length 5m, diameter 27.5cm, 380V, 3kW. 15. Automatic packaging machine with bag sewing and PVC bag sealing functions. Includes automatic labeling conveyor. Maximum capacity 4.2T/h, with air compressor. 16. New electric forklift, 2.5T, triple mast, low lift, with enclosed cabin.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: Iedpfx Ajxd U Izoabjtn - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. More information to follow. Itsdpfow U A E Rjx Aabon

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Iodpfxsw Uh Nze Aabetn

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, power: 75 kW (101.97 HP), Complete pelletizing line consisting of: - Pellet press OGM 1.5 - Hammer mill - Cyclone - Cyclone with fan - Screw conveyor - Material silo - Material mixer for pellet plant - Elevator - Pellet collector - Control cabinet - Pellet cooler TECHNICAL DETAILS Capacity for wood: 1 tonne/hour Capacity for straw: 1.5 tonnes/hour Die for sawdust: 8 mm Iodpfx Aaew Rmpfobstn Elevator height: 6 m MACHINE DETAILS Pellet press OGM 1.5 rated power: 75 kW Hammer mill rated power: 55 kW Cyclone with fan rated power: 11 kW

Condition: used, Year of construction: 2009, operating hours: 1 h, machine/vehicle number: -----, Business Relocation – High-Quality Pellet Production Plants for Sale! Iodpsw Tdk Ssfx Aabotn For years, we have been recognized as one of the leading manufacturers of premium pellets. Due to the relocation of our production site to our main plant premises, attractive opportunities now arise for companies in the wood and pellet industry: We are offering you the chance to acquire our currently operational production plants for manufacturing A1plus grade pellets. Your Benefits • High-quality machines and equipment currently in operation • Ideal for producing premium-grade A1plus pellets • Facility visits possible during ongoing production until mid-October 2025 • Attractive conditions for prompt purchase • On-site inspection & consultation Interested parties have the opportunity to see the equipment in operation on site and gain a comprehensive impression of the condition and performance of the machinery. For initial orientation, we provide you with informative photos of the machines. Upon request, we are happy to send you detailed technical specifications and provide individual consultation. For further information or to arrange a viewing appointment, please do not hesitate to contact us:

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Iodow Ulq Ajpfx Aabstn

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Itjdpfx Aeim I Rusabon Power and control cabinets, wiring

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Iedpfx Aasvpvp Iebstn

Condition: like new (used), functionality: fully functional, A Rollerhead and Hydraulic nut for the Amandus Kahl C35-780 machine in perfect state, these parts have only been used for a year to produce sawdust pellets. Rollerhead: €7500 hydraulic nut: €4000 If bought together: €10,000 Itedpfxsw Uafne Aabon

Condition: used, 🔥 For Sale: KWB Easyfire 10–35 kW Pellet Boiler – Reliable, Fully Automatic Pellet Heating with Austrian Quality! 🔥 Economical, quiet, and intelligent heating solution for family houses, apartment buildings, or smaller institutions. The KWB Easyfire pellet boiler offers fully automatic operation with minimal maintenance requirements. ⸻ Main features: 🌾 Fuel type: wood pellets ⚡ Modulating output: 10–35 kW – adapts to current heating demand 🧠 Automatic feeding, ignition, temperature control, and self-cleaning 🔊 Quiet operation, ideal for boiler rooms and plant rooms ♻️ High efficiency, low emissions 🇦🇹 KWB – premium Austrian brand, long service life, reliable performance 💥💰 PRICE: 3,900 EUR – EXCELLENT TECHNICAL CONDITION! 💰💥 Itjdswagt Rspfx Aabsn 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Specialist in used pellet and biomass boilers.

Condition: new, Year of construction: 2025, We produce pellet line and pellet mill We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 1t/h TSF press pellet mills - engine power from 7.5 kW to 45 kW Granulator TSF200 with two rollers Performance ~60-200 kg/hour Engine power 7.5kW The thickness of the matrix is ​​3.2 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~350kg Granulator TSF230 with three rollers Performance ~100-250 kg/hour Engine power 11kW The thickness of the matrix is ​​3.5 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~350kg Granulator TSF260 with two rollers, rotating matrix Productivity ~150-300kg/hour Engine power 15kW The thickness of the matrix is ​​3.5 cm The pellet diameter (specified when ordering) is standard 6mm Number of pressing rollers 2 pcs Machine weight ~450kg Granulator TSF360 with three rollers, rotating rollers Productivity ~ 250-500 kg/hour Engine power 22kW The thickness of the matrix is ​​4 cm The pellet diameter (specified when ordering) is standard 6mm Machine weight ~750kg Granulator TSF400 with three rollers, rotating rollers Productivity ~ 350-700 kg/hour Engine power 30kW The thickness of the matrix is ​​4 cm Isdpfx Aajghmnrebstn The pellet diameter (specified when ordering) is standard 6mm Machine weight ~850kg Granulator TSF450 with three rollers, rotating rollers Productivity ~ 450-800 kg/hour Engine power 45kW The thickness of the matrix is ​​4 cm The pellet diameter (specified when ordering) is standard 6mm Machine weight ~1000kg The machine has a warranty period of 12 months. CE Certificates

Condition: good (used), Year of construction: 2007, functionality: fully functional, Pellet production line based on Italian producer Zepi pellet press, hammer mill, pellet cooler and sifter. Isdpfxjvx S Rys Aabotn Machines are really powerful and reliable. Some parts like hammer mill are completely refurbished. Year of production 2007.

Condition: used, 🔥 For Sale: Fröling P4 3–15 kW Pellet Boiler – Fully Automatic and Quiet for Residential Buildings 🔥 Isdpfowah Sbjx Aabjtn The Fröling P4 3–15 kW is a high-quality, fully automatic pellet boiler – ideal for modern homes, passive houses, and well-insulated buildings. It ensures whisper-quiet operation, minimal maintenance, and outstanding energy efficiency. — Key Features: 🌾 Fuel: Wood pellets ⚡ Output: 3–15 kW 🧠 Fully automatic feeding, ignition, and cleaning 🔧 Integrated control, low-noise operation 🇦🇹 Fröling – Premium pellet technology from Austria 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Efficient heating systems for buildings with low energy requirements.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer Itodpfjhga Srex Aabsn pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. Itsdpfx Ajghmptsabjn We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas