Used Planer Head for sale (15,829)

Year of construction: 1990, condition: not inspected (used), Working width: 180 mm Height: 120 mm Fifth universal spindle Feed table length: 2.47 m Spindle diameter 40 mm Overall length: 4.95 m Depth: 1.64 m Laedpfeigzhhjx Aanok Height: 1.52

Condition: used, functionality: fully functional, Milling planer heads 4 pcs. Lasdpfx Aajvzuduonsk Bore 35 mm

Condition: excellent (used), Year of construction: 2008, Four-sided planer MBW623B max. width of the processed element 230mm max. height of the processed element 150mm 6 spindles: Ljdsv R Nl Ejpfx Aanoak 1) horizontal lower 230mm 5.5kW 2) vertical right 150mm 7.5kW 3) vertical left 150mm 7.5kW 4) horizontal upper 230mm 7.5kW 5) horizontal lower 230mm 5.5kW 6) universal 230mm, adjustable at an angle of 360° 7.5kW all spindles adjustable up/down, right/left spindle diameter 40mm feed on Cardan shafts pneumatically pressed shafts smooth adjustment of the feed speed on the inverter 5.5kW feed motor electric adjustment of the planing thickness pulling rollers in countertop

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Laodpjx Itr Nefx Aanok Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: good (used), 1 x Unifiller Systems Dual Head Rice Depositor Ledpfx Aajxyxamensak Model: DDGD Year: 2016

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Lajdspu A D Aspfx Aansk Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Lasdpfx Aaoxv Apwjnsk Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head Lodpfeupt Siex Aanjak - for sawing pallet boards - feed chain - feed pushers from the top

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Lsdpfx Aeb N Ahleanjak Weight: 250 kg

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type Lasdpfx Aajb Rnv Ssnsk negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Capacity: 80 m/min Ljdpfjg S Dm Njx Aanoak Planer feed table, tested. At speeds up to 80 m/min.

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes. Lodpfsu Au I Tsx Aaneak

Condition: ready for operation (used), Butler Planer Lajdpjwwk Rbjfx Aanek With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro3, total length: 7,580 mm, total width: 2,990 mm, total height: 3,520 mm, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories = - Electrically operated mirrors - Spare wheel - Sun visor = Remarks = Model description: BARCELONA ASTRA HEAD 6×6 (HD9 66.48T) MY24 Tractor Head Code Diesel Type: HD9 66.48T GCW: 104 Ton Horse Power: 480HP Rear Axle Rate: 4229 Shipping Dimension: 7575 x 2990 x 3520 mm Lasdow Duiuspfx Aanek Gear Box Type: Manual Gearbox ZF, 16 forward and 2 reverse gears Rear Overhang: 800 mm Tyres: 14.00R20 Drive Hand: LH Drive Rear Differential Lock: Available wheelbase: 3800 + 1450 mm engine power: Cursor 13-470CV Reinforced Air Filter double stage with air intake on the cab roof Heated Fuel Filter Standard Parabolic Suspensions (Leaf-Spring type) with stabilizer bar on the 1st axle Standard Batteries Qty2 (180Ah each) with manual cut-off Standard Alternator 90Ah x 28V (2520 W) Air Suspended Driver Seat (adjustable) and Standard Passenger Seat (adjustable) Electric Doors' Windows with tinted glass Standard Manual Rear View Mirrors CE compliant Radio pre-arrangement Front Lights protection grids Front Manouvering Hook (at center of front bumper) Standard Tool Kit and Hydraulic Jack Towing Device Provision Reverse Gear Buzzer Anti-Roll Bar On 2Nd Rear Axle Anti-Roll Bar On 3Rd Rear Axle Reinforced Rear Suspensions Front Reinforcing Plate For Front Drive Axle Fifth Wheel 3,5" Tilting (Jost Jsk38G-1) Auxiliary Air Intakes On Left Side Close To Batteries Provision For PTO Control Reinforced Front Parabolic Suspension 9 Tons Fuel Pre-Filter Front Mirror Trailer Plug Adapter English Plate Standard Front Hood (Same Color Of Cab With Logo In Black) Rear Lights Protection Grids Inflation Kit For Tyres: Hose + Air Gun + Manomenter Wheel Chocks (Qty 2) = More information = Transmission: ZF, Manual gearbox GVW: 9.900 kg Engine type: Cursor 13-470CV Cargo space capacity: 300 l

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Lasdpfx Aajx Ncu Asnok Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: Laodpjxizcvofx Aanek • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm Ledpfjwqcfdox Aaneak - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: excellent (used), SCM F520 Class Planer Working width: 520 mm 4-knife cutterblock Traditional knives Laedpfx Aaox H S Dnensk Electronic lifting and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm CE certificate Technical documentation (DTR) Year of manufacture: 2014

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Lajdpsxvhiisfx Aanjk Labeling machine

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Lsdpjd Akyzofx Aanjak Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Lsdpfx Aoxk T Igoansak

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: Lsdpfx Ajx Hzv Teaneak 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily Ljdpfx Aaew Rdybsneak • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: excellent (used), Infeed conveyor for four-sided planer Sacot TECHNICAL SPECIFICATIONS: Max material length: 1700 mm Max material width: 230 mm Material height: 70 mm 5x material feed chains Distance between outer material drivers: 1080 mm Machine dimensions: 4500 × 2400 × 1800 mm (H) Construction: heavy-duty, industrial, steel Control: electric + pneumatic Lajdpfx Aasx Hx H Nenjk This feeder is ideally suited for: sawmills, wood processing plants, production lines, and manufacturing of short and medium-length components. EXPANDABILITY OPTIONS (optional): Complete technological line including: Weinig Hydromat 23c four-sided planer, 60m/min SACOT panel saw SACOT stacker

Condition: excellent (used), Sacot CA.SCA.PILA 1400 Board Stacker A professional stacker designed for the automatic arrangement of boards into uniform, stable, and repeatable bundles. An ideal solution for sawmills and timber processing plants, significantly increasing efficiency and work comfort. TECHNICAL SPECIFICATIONS Stackable material length: 770–1400 mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding / unloading: roller outfeed table Construction: heavy-duty industrial steel Lasdpox Hd Tbefx Aanek Control: electric + pneumatic The stacker is perfectly suited for: sawmills, timber processing plants, production lines, and the manufacturing of short and medium-length components. EXPANSION OPTIONS (optional): a complete technological line including: Weinig Hydromat 23c 60m/min planer SACOT crosscut saw SACOT stacker See full description Suggest a price Lease available