Used Planer for sale (1,493)

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg Isdoz Agu Depfx Aiyeig including: toothed table lips console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Iedpez A Hhujfx Aiyjig

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable Iiodpfx Aiszx Sznjyjg - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Planing width: 500 mm Table height: 850 mm Iodpfsz Dbp Nox Aiysig Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Location: Rieth

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg Iodpfozr I Rljx Aiysig – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1985, Used machine Isdpfx Aijzpa Uksyeig Equipment and technical data: - 4-knife planing cutter block - Surfacing: - Working width: 500 mm - Total table length: 2200 mm - Motor: 4 kW - Thicknessing: - Minimum working height: 3 mm - Maximum working height: 230 mm - Maximum chip removal: 8 mm Availability: immediate Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Iisdpfxoz Aukaj Aiyog Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm including: Tersa knife shaft Auxiliary fence Planer safety guard Electric thickness table adjustment

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: - Length 290 cm - Width 70 cm - Height 100 cm - Weight 750 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 Iiedpfx Aszqlqmeiysg 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm Ijdpjw E I Rujfx Aiyeig - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: used, Year of construction: 2001, Working width: 630 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Ijdpfx Ajzq Dcnsiysig Weight: 1000 kg

Condition: excellent (used), CATALOGUE NUMBER: 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm - 5 spindles: Iodpfx Aijzrulceyjig 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 & 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure rollers - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H): 3500x1550x1400mm - weight 1750kg ADVANTAGES - with 5 heads - German production - unpainted - used planer, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm Iisdsztzi Djpfx Aiyeg From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Iodjyrndmspfx Aiyoig Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: refurbished (used), functionality: fully functional, planing width: 630 mm, number of blades: 4, overall weight: 1,080 kg, blade shaft diameter: 120 mm, chip removal: 8 mm, extraction nozzle diameter: 160 mm, planing height: 300 mm, SCM GROUP branded thickness planer with electronic table lifting. Working width 630 mm, robust machine suitable for professional use. High performance and reliability. Refurbished machine with a 6-month warranty, including post-warranty service. Bottom table with lifting mechanism using 4 screws Motor-driven lifting of the bottom table with micrometer adjustment Electronic measurement of working thickness Smooth adjustment of feed rate 2 rubber-coated feed rollers Technical data Working width max. 630 mm Working height min. / max. 3 / 300 mm Working table dimensions 630 x 1000 mm Iiedpfxozzpw Eo Aiyeg Motor power 5.5 kW Maximum material removal 8 mm Number of knives 4 pcs Knife head diameter 120 mm Knife head speed 4500 rpm Material feed rate 6 - 20 m / min Dust extraction port diameter 150 mm Weight 1080 kg Please verify the refurbished condition and machine readiness for pickup in advance! In stock in Telnice near Brno, Czech Republic. Machine testing, demonstration, and operator training are provided.

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW Iiedpfx Aszx Rkzjiyog - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1974, KAMRO thickness planer machine Model CONCORD DH5 Year of manufacture 1974 Motor 5.5 HP / 400 Volt 4-knife shaft (strip knives) Planing width 510 mm Planing height approx. 250 mm Feed speed 9 and 18 m/min. 2 table rollers Knife setting gauge Isdpfxowlfibo Aiyoig Operating manual

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 510 mm, number of blades: 4, overall weight: 715 kg, total length: 2,725 mm, blade shaft diameter: 120 mm, height adjustment type: mechanical, roll width: 120 mm, table length: 2,725 mm, Equipment: motor brake, SCM F2 F520 Planer Jointer Surfacer – LIKE NEW! Surface planer from renowned brand SCM. The machine is in excellent technical condition. Fully serviced. Italian manufacturer. TECHNICAL SPECIFICATIONS: - Maximum planing width: 510 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Motor: 5.5 kW - Infeed table length: 1495 mm - Outfeed table length: 1175 mm - Total table length: 2725 mm - Adjustment of infeed and outfeed table heights - Fence: 190 x 1200 mm - Fence angle adjustment - Safety switch - Power supply: 400 V - Cutterblock silencing - Cutterblock guard - Year of manufacture: 2014 - Operating manual (DTR) MACHINE DIMENSIONS: - Length: 2725 mm - Width: 900 mm - Height: 1200 mm - Weight: 715 kg Financing options available: leasing or installments. Simply visit our website: jbsmaszyny.pl Iodpfx Aijxxm Sboyoig You are welcome to test the machine. Where can you view our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport available across Europe and beyond! Tel: 664 335 465 Tel: 530 632 386

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 1,45,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Iedpfx Aisyl S Ngjysig Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: good (used), planer model U23E Isdpfx Aezz Iitsiyoig

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 510 mm, number of blades: 4, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2017 - CE certified, operating manual included TECHNICAL SPECIFICATIONS Ijdpfjzim U Djx Aiyeig - Working width: 510 mm - Number of knives: 4 - Knife dimensions: 510 x 30 x 3 mm - Rotational speed: 6000 rpm - Guide dimensions: 1360 x 200 mm - Guide angle: 90° - 45° - Max. chip collection: 8 mm - Motor power: 5.5 kW / 7.5 PS/hp - Shaft diameter: 100 mm - Table dimensions: 1155 mm, second table 1110 mm, total 2710 mm - Total length of the jointer tables: 2710 mm - Power supply: 3 x 400 V - Diameter of the dust extraction nozzle: 150 mm - Machine dimensions: 2710 mm x 1000 mm x 1150 mm - Weight: approx. 800 kg

Condition: excellent (used), For sale: Guilliet KXK four-sided planing machine Very well-maintained, from a one-man carpentry shop Year of manufacture: 1995 Max. planing width: 180mm Max. planing height: 120mm Length of feed table: 2100mm Tool diameter: 100mm Motor powers: Surfacing cutter: 3.7 KW Right cutter: 3.7 KW Left cutter: 3.7 KW Thicknessing cutter: 3.7 KW Iiodpszivf Sjfx Aiyjg Feed motor: 1.0 KW Motor power for height adjustment: 0.37 KW Motorized adjustment of the feed bar with the thicknessing cutter Dust extraction connections: Surfacing and thicknessing: each 160mm Left and right cutters: each 120mm

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 80 m/min. Iedpfx Aeyi Afmjiyoig Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, Year of construction: 1985, Dimensions of the thicknessing table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Maximum chip removal: 8 mm Iiodpfsz Agd Ssx Aiysg Working height min./max.: 3 / 235 mm Feed speeds: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 folding knives Speed: 5,000 min-1 Motor power: 5.5 kW Electric thicknessing table lift Setting gauge

Condition: good (used), functionality: fully functional, maximum working width: 600 mm maximum working height: 200 mm sides – interchangeable heads rollers in the table manual adjustment of the distance between the side heads smooth feed rate adjustment electric table adjustment multi-blade saw at the outfeed with a 11 kW motor Iisdpfjzz Nihox Aiyjg side heads with 6.6 kW motors each total power: 40.55 kW year of manufacture: 1991

Year of construction: 2017, operating hours: 200 h, condition: used, functionality: fully functional, We are offering this used Marunaka SUPER MECA-S super surfacer / planing machine, year of manufacture 2017. Serial number: 1074 Manufacture date: 02.11.2017 Rated voltage: 380 V Phases: 3 Network frequency: 50 Hz Total power: 2.3 kW Main motor power (continuous): 2.2 kW Main motor speed at 50 Hz: 1,410 rpm Feed speed: 53 m/min Maximum working width: 250 mm Maximum working height: 300 mm Net weight: 430 kg The machine comes with the following optional features: - Increased pass-through height to 300 mm - Pressure roller for wide workpieces - Lateral infeed and outfeed tables - Includes 10 blades at EUR 50 each The machine has seen very little use and is in excellent condition. Ijdpfx Aoy Hdp Neiyoig If you have any questions or need further information, please feel free to send us a message or give us a call.