Used Planing Facility for sale (4,115)

Condition: used, Blade: Z2 Duedpfx Afolf I A Depsn - 50 x 130 x 50 mm - Available: 2 units Price per piece: €50.00 + VAT

Condition: used, Blade: Z4 - 150 x 100 x 50 mm - One clamping bar is missing. Dodpfx Afelf I Ayepoun

Condition: used, Knife: Z6 Dodpfjlf I Avjx Afpeun 260 x 163 x 50 mm.

Condition: used, Blade: Z12(6). 260 x 200 x 50 mm 6 clamping bars are missing. Dusdpfx Aelf I Anefpon

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Dodpfx Aexb U Txsfpsun 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Djdpou Damdjfx Afpjun

Year of construction: 1965, condition: ready for operation (used), Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible. Djdpfx Afewxxv Uopjun

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Dedpjv T Apcefx Afpeun

Condition: ready for operation (used), An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible. Dodpfx Asw Rqw Hofpoun

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Duedpfx Afsxl Eltopon

Condition: used, Heavy-duty thickness planer Panhans 436 Planing width: 630 mm Planing height: 250 mm Electric height adjustment with tenth-millimeter touch button – digital Tersa cutter block Table with four-way guidance Main motor 7.5 kW Feed speed: 7 + 14 m/min Segmented infeed and outfeed rollers made of rubber, oscillating Segmented pressure beam made of solid aluminium – oscillating Duedpfsx U S Rdex Afpon Machine is FULLY REFURBISHED IN WORKSHOP, IN EXCELLENT CONDITION Available from stock Lieboch

Condition: used, - For hydraulic tools at maximum clamping length, - Thread: M44x1.5, - Right-hand tightening. Djdpfx Afelkcdvjpeun Price per unit: €60.00 + VAT. Available: 3 units.

Condition: good (used), functionality: fully functional, Planing width: 630 mm, 4-knife cutterhead, height: 210 mm Dodpfxeyhnats Afpsun

Condition: used, - Documentation available: No - CE certificate present: No - Table width: 340mm - Travel Z: 400mm - Max. stroke: 340mm - Travel Y: 340mm - Table length: 630mm - Travel X: 550mm - Min. stroke: 0mm - Throat depth: 600mm - Motor power: 3.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dsdpfx Aewnhqmefpoun Lukas van Rossum

Condition: used, total width: 1,600 mm, total length: 2,500 mm, total height: 1,700 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Table width: 450mm Duodpfxswnicwj Afpon - Travel Z: 300mm - Max. stroke: 700mm - Model: Horizontal - Travel Y: 1200mm - Table length: 700mm - Travel X: 800mm - Throat depth: 450mm - Model: - Motor power: 7.5kW - Transport dimensions: 2500mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Dedpfoyatffjx Afpeun Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: excellent (used), Weinig Hydromat 17 BL planer with destacker Feed: 60 m/min Heads: 1. Lower - 11 kW 2. Right side - 7.5 kW 3. Left side - 7.5 kW 4. Upper - 11 kW 5. Lower - 7.5 kW 6. Upper - 7.5 kW 6 feed rollers in the table Duodpfx Afsydlkhjpsn Feed motor - 15 kW Planing width - 170 mm Planing height - 120 mm Machine on an elevated platform Noblu Azev Euy Rjqajkt Loading included in the price. Excellent condition!

Condition: used, Bore: 40 mm Cutting circle (ø): 125 mm Length: 170 mm Material: steel Blades: Planer strip knives Z2 + chamfer cutter Available: 2 pieces Dsdpfx Aex Tu Rwofpeun Price per piece: €239.00 + VAT

Condition: used, Year of construction: 1964, mechanical ja stroke 900 mm weight of the machine ca. 6 t Duodoyacn Ajpfx Afpen

Condition: used, Bore: 50 mm Circle of rotation (ø): 163 mm Length: 150 mm Material: Steel Dedpfjx R Umgjx Afpjun Knives: Streifenhobelmesser Z4

Condition: used, Bore: 50 mm Circle of rotation (ø): 163 mm Length: 150 mm Material: Steel Dedox R Ulcepfx Afpoun Knives: Streifenhobelmesser Z4

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Dusdpfx Afevwgh Rspon Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Model: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Duodjw U Emdepfx Afpjn Table length: approx. 2200 mm Infeed and outfeed tables can be tilted - complete Slotted table lips Low-noise table lips Motorized automatic brake Number of knives: 4 pcs Safety cutter block Table roller: 1 Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Extraction port diameter: 140 mm Space requirement approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in its current condition as inspected, without warranty or guarantee

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Duedpfsxnqyhex Afpjn Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Duedsvwflbjpfx Afpjn