Used Plastic Pipe Welding Machine for sale (69,456)

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Dedpfx Afshwn Tiowjup Net weight approx. 2380 kg

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Dedpfx Afshubgzjwoup Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Dsdpohpf Iysfx Afwsup Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Duedpfx Asg D H Rusfwsp Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new Dujdpfx Afsg U A Uzjwop

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Dujdpoguvtdsfx Afwsp Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Dsdpfx Ajguvtajfwsup Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, TIG welding equipment, TIG welding machine NIMAK type GS 200 W TIG and electrode DC welding unit, E-welding machine also suitable for stick electrodes Serial No. 26642 Year of manufacture approx. 1983 Duedpfjdzqbvsx Afwjp Output 200 Amp. = 60% duty cycle 150 Amp. = 100% duty cycle Stepless adjustment range of performance Power supply 380 Volt, 50 Hz, 32 Amp. plug - 5 meter TIG torch package - HF ignition - Stepless current adjustment and current up-slope - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg Good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Dujdpfx Afsdzqa Hjwsp Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle Dusdpedzqacsfx Afwsp 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Welding turntable – Welding positioner with enclosure Dusdpfx Afodzp U Iswsp Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Dedpfxjd N E Rvj Afwoup Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Dedpfxjwwaz Ne Afwjup Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Dedpfxjdz Sq Es Afwoup Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, Year of construction: 2004, functionality: fully functional, RS125 Friction Welding Machine, max. upsetting force 190 tons, KUKA friction welding machine. Modernized by the manufacturer KUKA in 2016. This machine is currently being fully overhauled by us. Equipment: servo hydraulics, facing unit, new steady rest, 2/3-jaw chuck, 'positioned welding' possible, e.g., for drive shafts. The friction welding machine is currently in use in our production for manufacturing hydraulic piston rods, aluminum-brass connections, production of small and large thread taps, manufacture of pressure rollers, etc. You are welcome to inspect this machine. Djdpfoq Aurvex Afweup

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, coming from a company liquidation. Dujdsyl R U Iopfx Afwjp

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 755 mm, total width: 400 mm, total length: 880 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 60 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 16 A, open-circuit voltage: 87 V, welding current at 60% duty cycle: 200 A, welding current at 100% duty cycle: 170 A, input current: 16 A, protection type (IP code): IP23, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 Including TIG torch i-LTW 3000-PM, 4 m TIG Welding Welding range 3~ 400 V: [A] 5 - 300 Voltage range: [V] 10.2 - 20 TIG duty cycle AC 400 V Duty cycle AC 100% (40°C): [A] 200 Duty cycle AC 60% (40°C): [A] 230 Duty cycle AC max. welding current (40°C): [%] 30 TIG duty cycle DC 400 V Duty cycle DC 100% (40°C): [A] 230 Duty cycle DC 60% (40°C): [A] 270 Duty cycle DC max. welding current (40°C): [%] 45 Electrode Welding Welding range 400 V: [A] 10 - 200 Voltage range: [V] 20.4 - 28 Usable electrodes: [Ø in mm] 1.5 - 5 Electrode duty cycle Duty cycle 100% (40°C): [A] 170 Duty cycle 60%: [A] 200 Duty cycle max. welding current (40°C): [%] 60 General Specifications Open circuit voltage: [V] 77 - 87 Power supply 400 V Mains voltage 3~ (50/60 Hz): [V] 400 Mains fuse 3~ (50/60 Hz): [A] 16 Positive mains tolerance 3~ (50/60 Hz): [%] 15 Negative mains tolerance 3~ (50/60 Hz): [%] 15 Mains plug: CEE 16 Standards and Approvals Protection class: IP23S Insulation class: F Standard: EN 60974-01 Markings/Certification: CE, S Dodsyrttyepfx Afweup Cooling system Type: Gas-cooled, water-cooled Cooling capacity (l/min): [kW] 1.14 Tank capacity: [l] 3.4 Dimensions (L x W x H): [mm] 880 × 400 × 755 Weight: [kg] 60

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 340 mm, total width: 280 mm, total length: 660 mm, ground cable length: 2,500 mm, overall weight: 31 kg, type of cooling: air, hose package length: 5,000 mm, electrical fuse: 32 A, protection type (IP code): IP23, welding current (min.): 100 A, welding current (max.): 1,000 A, Equipment: documentation/manual, type plate available, incl. welding torch A12 – gas length 5 m, with shielding gas stand PSS-2 and accessories for ARC 6 to 12 mm gas, protective hose for hose assembly Application: - Particularly suitable for thicker sheet metal from approx. 2 mm - Stud welding of welding nuts type HexNut M6 to M8 (special accessory required) - For welding on perforated and non-perforated sheets Features: - Microcontroller control - Function monitoring - Error code display - Lift-off test - Library function - Process flow control Safety: - Integrated mains filter - Optimal for construction sites with high mains voltage fluctuations - EMC tested - High voltage testing Duodeyrtp Uspfx Afwep - Restart lockout - Thermal monitoring of the transformer - Thermally controlled fan - Galvanic isolation between control and welding cables - Maximum protection against external interference - Protection class IP 23

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Djdpfxodzp Txj Afweup Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled Duodpfjwl Dptjx Afwep -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 40kVA Short circuit-current: 26,2kA Electrode force: 65-390daN / single stroke Throat depth: 250-550mm --- Weld control: MPS 10 (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock Dujdpfx Aeyrx Ddefwjp

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used, fully functional Mecasonic DC 3010 Syst ultrasonic welding machine. Type: DC 3010 Syst Serial number: G 380131359 Year of manufacture: 2016 Country of manufacture: France Generator frequency: 30 kHz Mains frequency: 50/60 Hz Dujdpfx Afjyryhqjwjp Rated voltage: 230 V Power: 2.1 kVA Accessories: 3 sonotrodes (see picture). If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Dusdpex Ic T Ajfx Afwop Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: used, 50 pcs. Fronius Welding Machine TPS 450, used 🧰 Product Features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling type: AF • Welding processes: MIG/MAG, MMA, TIG 💰 Price per unit €1,500 net, excl. VAT • Volume discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible anytime by appointment Dodpfx Afsyn Ii Isweup Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Modifications and errors in the technical data, specifications, and prices as well as prior sale reserved! See our T&Cs, all prices excl. VAT ex-stock.)

Year of construction: 2007, operating hours: 800 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 01277, Perfect machine, a tiltable head for out-of-square welds 0 - 90° Dusdpfx Afoyq N D Sswop