Used Plastickoil Concep Qs for sale (181)

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Todpfezw D Hgsx Airjd Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Concept Laser Concept Laser M2 cusing Multilaser Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 mm (X x Y x Z) Material processed: CL31 / Aluminum-silicon-magnesium alloy (AlSi10Mg) or CL20 / Austenitic stainless steel (316L / 1.4404) Layer thickness: 20-80 μm Production speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage time Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Lifting device Inox 200 Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current draw: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See picture) Tedpfx Aijzh Dp Njred (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Todpfxex A Hfij Airjd Operating Units Left Side: 9 nr

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Tsdpfx Aioz D U Skersd Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-36, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 3,500 kg, tire condition: 100 %, wheelbase: 4,325 mm, fuel: diesel, fuel tank capacity: 93 l, color: black, gearing type: automatic, emission class: euro6, number of seats: 8, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, summer tires, traction control, trailer coupling, truck registration, MB Sprinter 319 Bluetec - BusConcept Premium 2026 - Seats: 8 / 6+2 New vehicle. Delivered without registration, with a 2-year warranty. The vehicle comes with all necessary documents and a European Certificate of Conformity (COC). Since 2005, we have been operating in the European market and specialize in the production of luxury coaches and commercial vehicles. Our company offers customized products made from high-quality materials and incorporating modern technological solutions. Our goal is to set new trends in the industry, promote Polish engineering, and create unforgettable, legendary travel experiences. Complete equipment options available upon request. Photos are examples of a vehicle that can be ordered. If you have any questions, please do not hesitate to contact me. Delivery time approximately 2 months. Todsi Ei Syspfx Aired - Contact us: Auto-Wardenga Irenäus Wardenga, also available via WhatsApp.

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Tjdezfprkjpfx Aired Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm Tsdpfx Ajyhcfkoired • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: used, Year of construction: 2018, Manufacturer: Poly Concept Inox Year: 2018 Tjdpfxsz Eb Rce Airsd Type: Vibrating conveyor Variable speed drive: yesGrate size: 22 x 20 cmMesh size: ± 4.20 mm / wire diameter: 1 mm Dimensions: 50 x 150 x 50 cm Video showing the machine in operation available on request

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Tedpfxszbrn Is Airsd

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Tsdoy In Dgspfx Airjd

Condition: ready for operation (used), Year of construction: 2018, An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible. Tjdoygmckopfx Airsd

Year of construction: 1997, condition: used, Year of manufacture 1997 Serial number 9937 Working area X 3100mm Working area Y 600mm Working area Z 850mm Tsdpfsmhf E Nsx Aired Main motor 4 x 5Kw 5-axis machine Number of milling spindles 4 Number of revolutions max 1800 1 table 3000mm x 550mm

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Todpfx Aef Nkv Ssirjd Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Tedsxnb Hfepfx Aired Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: excellent (used), Ref. 60) Dust Collector N° 3 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ref. 61) Dust Collector N° 4 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ref. 62) Dust Collector N° 5 “RDL” (with fan HP 100) 12’ x 40’ (mm 305 x 1015) Tedpfx Ajzx Eiroirsd Ref. 63) Dust Collector N° 6 “Concept Air” (with fan HP 30) 6’ x 20’ (mm 152,5 x 508)

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Tsdpfetxb Avsx Aired

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: Tjdpfx Aisvxgrrorsd • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Todpfx Aotxb Apjirjd

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Tsdpoww Ivnsfx Aired

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Tjdpfxjz Nfb Io Airod Operating Units: 3 nr

Year of construction: 1996, condition: used, Technical Data Horizontal design Common measuring table, but both measuring arms operate in single-column mode SMM1, serial number 7057760595(1), year of manufacture 1995 SMM2, serial number 96346, year of manufacture 1996 Measuring table X = 3500 mm Y = 2000 mm Measuring volume SMM1 X = 2500 mm Y = 1600 mm Z = 1800 mm Measuring volume SMM2 X = 2500 mm Y = 1200 mm Z = 1500 mm Software 1x Holos CNC dongle license Light, Extended, and Geo, running on Windows 7 Prof. 2x Interface licenses HOLOS QS-STAT Tsdpfedtf I Hjx Airsd 2x Control software CMM-OS CNC 5-axis machine The machine can be upgraded with new software according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively aimed at specialist customers! (Changes and errors in the technical data, information and prices, as well as prior sale, are reserved!)

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Tsdpfxsz Sr Aws Aired Included: pump with base, control box with buttons, float switch, power cable with power plug, discharge elbow with quick-release coupling. Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Year of construction: 2014, operating hours: 2,250 h, condition: used, New: No Tsdpfx Aey Am U Hjirsd Year of construction: 2014 Operating hours: 2.250 Power: 530 kW (721 HP) VAT/margin: VAT qualifying

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Tsdpfxozku Rpe Aired Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Tjdpfx Aijy In A Njrjd Maximum panel thickness: 60 mm Operating Units: 8 nr