Used Polymer for sale (109)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 53169, Preparation of Tomal flocculant. Bjdpfx Anj Ahfmzsdodi

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 8000, Year of construction: 2020, total length: 1,158 mm, total height: 1,788 mm, total width: 882 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 296 mm, feed length Y-axis: 296 mm, feed length Z-axis: 296 mm, wire diameter (max.): 1.75 mm, Equipment: CE marking, emergency stop, Used 3ntr Spectral 30 3D printer, from a demo center Availability: immediate Origin: showroom, used only for demo purposes. The SPECTRAL 30 is a high-performance FDM printing system for ultra-polymers such as PEEK, PAEK, Ultem 9085, Ultem 1010, PPS, and other standard filaments including ABS, ASA, and NYLON. 4 extruders up to 500°C, 0.4mm nozzles for 1.75mm diameter filaments, with the option to perform annealing in the printing chamber. In impeccable condition, coming from a showroom and used only for demonstration purposes. The machine is perfect, ready for operation, and available for any testing or inspection. It is supplied with its wooden crate. Technical specifications Bdsdpezzw Ryjfx Andoi Technology: FDM Heated chamber up to 250°C + 4 integrated ventilation units (desiccators) Printing area: 296 x 296 x 296 mm Connections: Ethernet Calibration system: automatic Weight: approximately 400 kg Power supply: 380 V

Condition: used, functionality: fully functional, Polymer Laboratories PL-ELS 1000 Evaporative Light Scattering Detector. Laboratories is a completely new design of high sensitivity Evaporative Light Scattering (ELS) Detector for HPLC, microHPLC and GPC/SEC. This ELS detector has replaced the RI for the detection of solutes with no UV chromophore, giving enhanced performance with the benefits over an RI of improved sensitivity, excellent baseline stability, gradient compatability, and providing a positive response for all solute/solvent combinations. Features: -Small footprint for laboratory convenience -Improved sensitivity -Low dispersion -Excellent baseline stability -Wide gradient compatibility -Rapid equilibrium Bdsdet Uk Dmopfx Andoi -Detection of even relatively volatile compounds -The PL-ELS 1000 from Polymer Good working condition. Please check out our other listings as well.

Year of construction: 2002, condition: used, functionality: fully functional, Name: Polymer Plant Manufacturer: Alltech Type: Polymat 4000E Year built: 2002 Driving force: 3 x 0,37 kW Content: 4000 Liters Material: Polypropylene Conveying / dosing of: Powdered granules and liquid polymer concentrates Bsdez Sqnxepfx Andsdi Performance: 1000 - 4000 L/h # Chamber: Three-chamber flow-through system Dimensions: L 2800 x W 1600 x H 2900 mm Empty weight: 400 kg Technical doc.: Yes Message: Water supply of 6 m³/h at 3 bar Accessories: 55 Solids feeder, 2 progressing cavity pumps Condition: Second hand Price: By request

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Bjdszlbx Njpfx Andodi Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)

Condition: like new (used), Year of construction: 1983, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 125 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 3,000 rpm, total height: 4,000 mm, total length: 9,000 mm, total width: 6,000 mm, table length: 1,450 mm, table width: 1,250 mm, spindle mount: MK 5, type of input current: AC, workpiece weight (max.): 12,000 kg, drill spindle length: 600 mm, spindle stroke: 600 mm, mount diameter: 50 mm, control cabinet width: 600 mm, control cabinet length: 4,000 mm, control cabinet height: 2,000 mm, overall weight: 24,350 kg, year of last overhaul: 2017, Equipment: crane, rotational speed infinitely variable, Coolant system with 4 nozzles and center spindle Protective door at the operator station * The machine does not require a foundation but is installed on a specially designed polymer bed, standing 600 mm high. * Additional feature: A CNC-controlled rotary table is integrated into the boring quill, allowing for the machining of contours up to a diameter of 600 mm. The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced, and the control system was upgraded to Siemens 840 D. In the mechanical area, for example, the roller bearing shoes and the ball screw in the Z-axis were replaced, as well as the spindle head, including its guide and flyer chains for the counterweights, which were inspected and/or renewed. In addition, HCR installed a machine enclosure (open at the top), which was integrated into the safety concept, including operating mode 4, by Scharmann. Bdjdpfx Anj Agd Ahsdji In 2017, the CNC rotary table, the differential gear, and the boring spindle unit were dismantled and overhauled at the Scharmann factory (new bearings, seals, and gears).

Condition: repair required (used), functionality: not functional, Year of construction: 1969, overall weight: 2,000 kg, total length: 1,300 mm, total height: 2,000 mm, We are offering this Richard Stuhlmann & Co. Polymat 70, manufactured in 1969, which requires repairs. Manufacturer: Richard Stuhlmann & Co. Model: Polymat 70 Year of manufacture: 1969 Condition: Requires repairs The machine has hydraulic problems; it may be possible to repair it, or it can be used as a source of spare parts for an existing machine. We also offer accessories for the machine, which can also be purchased. For example: Guide wedge WC9 + WC10 Guide rod WC9 + WC10 Guide mandrel Ø85 + Ø110 Bsdpfx Ane Agi Izjdsdi Please feel free to submit a realistic offer. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Bdedpfx Aoxlknmjndei Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Bjdpfjzbtvtjx Andodi Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Year of construction: 2000, condition: used, Manufacturer: Tomal Type: PolyRex 3,0 Year built: 2000 Content: 2 x 1,5 m3 Conveying / dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless steel Model: Vertical Dimensions: L 1.900/1.050 x W 1.800/600 x H 2.200/2.200 mm Empty weight: 300 kg Technical doc.: Yes Condition: Second hand Price: By request Bdodoyg E A Ajpfx Andji

Year of construction: 1998, condition: used, Name: Dosing System For Polymers Manufacturer: PRO-ENTEC Type: RM2 Bdjdpfsxa Atqjx Andoi Year built: 1998 Conveying / dosing of: Liquid polymer Performance: 2 - 30 L/h Control: Yes Dimensions: L 1.150 x W 600 x H 1.600 mm Empty weight: 100 kg Technical doc.: No Condition: Second hand Price: On demand

Year of construction: 1999, condition: used, We have two units available Name: Polymer dosing system for liquid Manufacturer: Reiflock Type: Reifomat 500 Year built: 1999 Performance: Polymer throughput: 0,12 - 2,5 l / min. Water flow: 40 - 160 l/min. Bdjdjyvixbepfx Andei Dimensions: L 1000 x W 750 x H 1500 mm Empty weight: Approx. 120 kg Technical doc.: yes Condition: Second hand Price: On demand

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Complete Industrial Grinding & Micronization Line – 80 kW – 2019 Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year: 2019 Condition: Used – Excellent condition, fully operational Location: Zagreb, Croatia DESCRIPTION For sale: a complete DESI-14 industrial grinding and micronization system, manufactured by Desintegraator Tootmise OÜ, Estonia. The DESI-14 uses high-speed impact technology for efficient size reduction and fine grinding of various industrial materials. APPLICATIONS: Food industry: milk powder, casein, gelatin, grains Chemical industry: polymers, resins, catalysts, reagents, melamine, pigments Mineral industry: calcium carbonate, mineral fillers, lime, fertilizers, salts, ores Agricultural and biological materials: soybean, wood sawdust, bark, chopped straw DOCUMENTED PERFORMANCE Factory test with calcium carbonate (CaCO₃): Throughput: 1,000 kg/h 92% of particles below 30 μm Feed moisture: 2% TECHNICAL DATA Total installed power: 80 kW Main drives: 2 × 30 kW Rotor speed: approx. 2,965 rpm Rotor configuration: 6 rows Feed hopper: 1.5 m³ Maximum airflow: 1,000 m³/h Power supply: 380 V / 50 Hz Cooling: Water-cooled grinding chamber COMPLETE SYSTEM INCLUDES DESI-14 disintegrator Two complete rotor sets Feeding hopper and WAM screw feeder Cyclone separators Rotary valves and screw conveyors WAMFLO filtration system Exhaust fan Big-bag discharge system Electrical control panel Supporting steel structures and connecting ducts Bdodpfxjzy Nbhj Andei ADVANTAGES Complete industrial processing line Versatile material applications Documented high-capacity grinding performance Suitable for various industrial powder-processing applications Excellent condition and immediately available. Inspection can be arranged by appointment. Contact us for price, further technical details and inspection. Further technical information, photographs and inspection arrangements are available upon request. Location: Zagreb, Croatia Availability: Immediately available

Condition: excellent (used), Year of construction: 1998, For sale: a Polymac Rubber veneer machine, lightly used, in like-new condition. Bedpfx Ajz Sb T Tsndsdi

Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year built: 2003 Content: 1000 Liter Conveying / dosing of: Powdered # Chamber: 2 Control: Yes Driving force: 1: 0,55 kW, 12 0,55 kW Model: Horizontal Dimensions: Length 2000 x width 900 x height 1900 mm Bdedpfevt Sdpjx Andoi Empty weight: 1000 kg Technical doc.: Yes Accessories: Dry material dispenser type T09K0007 Condition: Second hand Price: On demand

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Bedpfsx D Df Nox Andjdi Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, Offered for sale directly by the owner: 2019 FONG KEE TSE-90/150/150-2400 three-layer co-extrusion flat sheet & roll line with only 7,000 operating hours. Used exclusively in our own production, the line remains fully assembled indoors at our facility in Torbalı, İzmir, Türkiye, and is available for live running inspection by prior arrangement. Equipped with top-tier Western components (NORDSON EDI USA die & feedblock, 3x MAAG Switzerland melt pumps, Dynisco USA sensors, Siemens PLC/drives, and Schneider switchgear), this line delivers European-grade optical surface quality. KEY HIGHLIGHTS * Production-Proven Thickness up to 3.0 mm: Although factory paper specs listed 0.3–0.8 mm for thin furniture foil, in our own production we have successfully produced both PET (0.3–3.0 mm) and PMMA/ABS (0.6–3.0 mm) sheets up to 3.0 mm thick. * Multi-Polymer Capability: Production-confirmed across PET, PMMA, ABS, PS (HIPS/GPPS), PC, and PP in A/B/A or A/B/C structures. * Optical Mirror-Gloss & Matte Finishes: Produces both optical-grade mirror gloss and anti-glare matte finishes. An additional dedicated matte calender roll is included. * Dual Downstream (Sheets & Rolls): Features BOTH an automatic guillotine cutter + vacuum sheet stacker AND a double-station turret winder. 1. MAIN SPECIFICATIONS * Manufacturer & Model: FONG KEE (Taiwan) – TSE-90/150/150-2400 * Year / Hours: 2019 / 7,000 h * Configurations: 3-Layer (A/B/A or A/B/C) * Net Trimmed Sheet Width: 1,500 – 2,100 mm * Sheet Thickness (Production-Proven): PET 0.3–3.0 mm | PMMA/ABS 0.6–3.0 mm * Max. Output: Up to 1,000 kg/h (depending on resin & thickness) * Line Speed: 3 – 10 m/min 2. EXTRUSION & MELT DELIVERY Bodpfx Aszzdnfsndedi * 3x Vented Single-Screw Extruders: - Extruder A: Ø90 mm, L/D 35:1 (Vented) - Extruder B: Ø150 mm, L/D 32:1 (Vented) - Extruder C: Ø150 mm, L/D 32:1 (Vented) * Filtration: 3x Hydraulic screen changers * Melt Pumps: 3x MAAG (Switzerland) gear melt pumps * Sensors: Dynisco (USA) melt pressure & temperature transducers * Feedblock: EDI Ultraflow I (USA) 3-layer feedblock * Extrusion Die: EDI Ultraflex HRC 100 Fastgap (USA), 2,300 mm width 3. CALENDERING & DOWNSTREAM * Polishing Stack: Horizontal 3-roll stack (Ø400/600/600 × 2,400 mm), hard-chrome mirror rolls with individual TCUs * Spare Roll: 1x Additional dedicated matte calender roll included * Masking: Dual-side protective film lamination * Haul-Off: Cooling conveyor, edge-trimming, and precision haul-off unit * Cutting & Stacking: Automatic guillotine cross-cutter + automatic vacuum stacker * Winding: 2-station turret winder with automatic tension control 4. AUTOMATION & COMMERCIAL TERMS * Controls: Siemens SIMATIC PLC with HMI panels, Siemens SINAMICS G120 drives, Schneider switchgear, air-conditioned cabinets. * Ideal Applications: Furniture foils/laminates, white goods/refrigerator liners (HIPS/ABS), sanitaryware (PMMA/ABS), optical/lighting sheets (PMMA/PC/GPPS), thermoforming rolls (PET/PP). * Asking Price: USD 790,000 EXW Torbalı, İzmir, Türkiye (Open to reasonable offers for a prompt sale).

Year of construction: 2001, condition: used, functionality: unexamined, machine/vehicle number: BFP-007, We are offering this used Sernagiotto BFP 2000I belt press from 2001 for sale. Multiple units are available. The machine can be used for dewatering sludge from washing processes, for example, in soil remediation/washing of agricultural products or in manure processing. The frame is galvanized, and the press is suitable for heavy, inert sludge fractions. Machine: SEM Model: 2000 I Serial number: 60405715010001 Year of manufacture: 2001 Installed power: 7.75 kW Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Empty weight: 10500 kg Operating weight: 11500 kg Belt width: 2100 mm Equipped with a mixing tank with agitator for polymer dosing. Various machines are available. All technical information is available, as well as spare parts. The machines come directly from the site, have been partially disassembled for transport, and can be prepared for use by us if desired. We also have 2 used polymer preparation stations available, if desired. These still need to be fitted with control systems. Bdedpfx As Agrcrendsi Viewings are by appointment only. Further information and photos are available upon request. The exact scope of delivery will be determined at the time of sale.

Condition: like new (used), Year of construction: 2019, operating hours: 2,611 h, functionality: fully functional, machine/vehicle number: 7621, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, total height: 2,900 mm, total width: 2,400 mm, total length: 2,200 mm, table width: 900 mm, table length: 530 mm, type of input current: three-phase, input voltage: 400 V, workpiece weight (max.): 600 kg, distance table to spindle center: 600 mm, input frequency: 50 Hz, number of slots in tool magazine: 30, Equipment: documentation/manual, EXERON HSC 600/3 – a high-speed 3-axis CNC machining center, particularly suitable for the production of graphite electrodes. The EXERON HSC 600/3 is a highly precise 3-axis CNC machining center, designed primarily for machining graphite electrodes. The machine is optimized for high-speed (HSC) machining with high dynamic performance on all axes. The robust construction with a portal and a polymer concrete bed ensures excellent vibration damping, maximum precision, and top-quality surface finish. The machine is equipped with digital drives for all axes, direct measuring systems with a resolution of 0.0001 mm, a high-frequency spindle for HSC machining, and a Heidenhain TNC 640 control system. Thanks to its compact dimensions, it offers a minimal installation footprint and excellent accessibility for operation and automation. The machine is in excellent technical condition, has been used very little, and is ready for immediate deployment in production. Bdedpfx Anezrhd Sodei

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Bodpfozl Td Rsx Andodi Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design Bdsdpfx Ajzulh Tendji The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Bdedpfxey Ug Ece Andei Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 30 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 620 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,600 mm, total length: 3,940 mm, total width: 2,300 mm, overall weight: 7,700 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 5 | 2025 | TCT HIGH-PERFORMANCE SAW | 32% SAVING TOP MODEL FROM PEGAS-GONDA – CNC HIGH-PERFORMANCE BAND SAW FOR CARBIDE-TIPPED SAW BLADES! We offer a PEGAS-GONDA THOR 5, model year 2025, directly from our showroom. The THOR 5 belongs to the top class of our production range. It was specifically developed for highly productive sawing of solid materials with carbide-tipped saw blades (TCT technology). The extremely robust construction, the powerful 15 kW drive, and the intelligent cutting control enable high cutting performance, precision, and low vibration. SPECIAL PRICE – 32.3% SAVING! New price: 127,008 EUR Our price: 86,000 EUR plus VAT You save 41,008 EUR! TECHNICAL DATA Model year: 2025 – Demo machine Fully automatic CNC two-column band saw Cutting range, round: 550 mm Cutting range, rectangular: 620 × 550 mm Straight cuts 90° Saw blade: 7680 × 54 × 1.6 mm Band speed: 15–150 m/min Main motor: 15 kW Weight: approx. 7,735 kg SIEMENS SIMATIC S7-1200 PLC SIEMENS TP700 Comfort Touchscreen Servo-controlled saw feed with ball screw drive CNC material feed: 3–750 mm per stroke Multiple feed: up to 19,999 mm Hydraulic material clamping and band tensioning HIGHLIGHTS OF TCT TECHNOLOGY Optimized for carbide-tipped saw blades Highly productive cutting of solid materials Low-vibration, heavy-duty construction with polymer concrete filling Bdodpfxo Aa Drfj Andji Automatic cutting control ASR (ARP/RZP) Automatic cutting path control KKR Automatic material feed and programmable cutting cycles Integrated chip conveyor Ideal for industrial series production 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of recognized warranty claims, the buyer only bears the travel and mileage costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician labor: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 86,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES Original PEGAS-GONDA accessories and roller conveyors available. We will gladly prepare an offer for a complete high-performance sawing station. YOUR ADVANTAGES: TCT high-performance technology 15 kW drive for demanding cuts Fully automatic CNC operation Directly from the manufacturer 41,008 EUR price advantage 6 months warranty Immediately available Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Bedpfjd Hgc Uex Andsdi Article no.: RE-HU-2019-0602-B38-e Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Dimensions: diameter 2.40 x height 2.80m Volume: 12 m3 Year of construction: 1989 Fabr. No .: 55163

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) Bsdpfxjwz Iuxs Andedi - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis