Used Portal Grinding Machine for sale (66,739)

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg Iedpsyuy Eusfx Ahneig

Condition: used, grinding diameter 600-750 mm grinding length 600 mm workpiece dia. 350 mm control Siemens 840 DSL weight of the machine ca. 10 t dimensions of the machine ca. 5600x4600x3000 mm Retrofit 2019 Iijdpez Auqtofx Ahnsg Workpiece length: max. 600 m Workpiece diameter: max. 350 mm Workpiece weight: max. 200 kg Power supply: 400 V Frequency: 50 Hz Power consumption: max. 35 kVA Grinding wheel diameter: 600-750 mm Grinding wheel thickness: 100-280 mm Weight with flange: approx. 300 kg Peripheral speed: 45 m/s max.

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed Ijdpfx Aof Um Raehnoig o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, The Bottero 110 FX is a robust, vertical flat glass straight-line edging machine designed for continuous operation. Specifications: • Type: 110FX • Serial number: 30600100001753-05040_011 • 10 spindles • Direction of travel: right – left • Glass thickness: 3 – 30 mm • Year of manufacture: 2020 • Feed rate: 0.6 – 6 m/min • Minimum glass size: 40 x 40 mm • Glass thickness: 3/50 mm • Speed: 0.6 / 6 m/min • Installed power: 27 KVA • Weight: 3,600 kg Iiedpfxszr Upze Ahnog • Water tank included

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Iiedpozgvlysfx Ahneg

Condition: refurbished (used), Year of construction: 2026, Kellenberger 1000U universal grinding machine, refurbished Technical details: - distance between centers : 1000 mm - centers height : 125 mm - grinding diameter: 250 mm - table orientation : -/+ 8 ° - universal wheelhead - grinding wheels dimensions : 400 x 50 x 127 mm - motor power : 3 kW - spindle speed : 1500 / 1700 / 2200 - orientation of grinding wheel holder headstock : 270 ° (3 x 90°) - boring for internal spindle : 90 mm - orientation of part holder headstock : 180 ° - spindle speed : 20 - 400 rpm - spindle internal cone : Morse 5 - motor power : 0,9 kW - inner cone tailstock : Morse 4 - tailstock sleeve travel: 30 mm - dimensions : 2860 x 1680 x 1670 mm - weight : 2500 kg Accessories/options: - automatic cycle works - tailstock - lubricating tank with pump - 1 internal grinding spindle - external grinding wheels - coolant tank with paper band filter type - wheel dresser - documentations - etc... Iisdszxnf Aopfx Ahneg The machine is partly overhauled, included: - new geometry - new electrical cabinet - bearings replaced - new painting - etc....

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m One machine is suitable for rough grinding, and the other for finish grinding. The machines were used for the production of connecting rods. In our assessment, the machine is in good used condition. Accessories, tools, and work-holding devices shown are included in the scope of Iedpfx Ajxq R Haohneig delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Iiodpjyxf Ttsfx Ahnjg Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Technical data + accessories, see separate PDF. Ijdozbqzajpfx Ahnoig

Condition: used, Brand : Estarta Model: 301 Type: Centerless grinding machine Grinding : (Min.) 1’5mm (Max.) 50 mm Grinding wheel dimension 300x175x125 mm Ijdpfx Aezyx Spohnjig

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A Iodpfx Ahjxlip Aonsig • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Iiodpfx Ajw Rpvbshnjg Power: 9 kW Laser diode 9926ä

Condition: excellent (used), Year of construction: 1963, Maximum height: 100 mm Distance between centers: 500 mm Grinding wheel diameter: 300 mm Maximum grinding wheel speed: 2,825 min-1 Grinding head can be rotated 90° to the left and right Maximum workpiece speed: 750 min-1 Spindle taper MK 4 Tailstock 3-jaw grinding chuck 125 mm Faceplate 160 mm Iijdozxqt Njpfx Ahnjg ER 40 collet chuck with 28-piece collet set Fixed center Grinding wheel flange with grinding wheel Wet grinding device

Condition: used, Technical details: Ijdpforkr U Eox Ahnjig grinding length: 600 mm centre height: 180 mm swing dia.: 360 mm workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Condition: ready for operation (used), Year of construction: 1989, AUTOMATIC GEAR GRINDER – 2 units available Manufacturer: CSEPEL Model: FKA 326-10 THE MACHINE USES THE FASSLER DRESSING METHOD. • Gear diameter: 320 mm • Module range: 0.5 – 6 • Slide stroke: 180 mm • Number of teeth: 10 – 260 • Max. workpiece weight: 80 kg • Clamping length: 420 mm THE MACHINES ARE COMPLETE WITH NUMEROUS ACCESSORIES: GRINDING WHEELS, WHEEL HOLDER, FASSLER DRESSING TOOL, CHANGE GEARS. Iedpfx Aezxzlijhnjig

Condition: refurbished (used), Year of construction: 1996, GENERAL OVERHAUL Automatic oscillating belt grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed rate, continuously variable, from 25 - 25 m/min Feed motor 0.55 kW Drive motor 7.5 kW Grinding belt 320 x 2000 mm Iiodsfigvqjpfx Ahnsg

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Iiedpfx Aszhma Dehnog Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: ready for operation (used), Year of construction: 2005, total length: 600 mm, total width: 600 mm, 600x300mm travel range 600x300mm magnetic table fully automatic Isdpezz N A Iofx Ahnoig

Condition: used, Year of construction: 2007, Control SIEMENS 840D powerline spindle drive 11 kW grinding wheel diameter 400 mm grinding wheel width 100 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and Iisdpozy Sinofx Ahnjg prior sale.

Condition: new, Year of construction: 2026, CORMAK PSM200 – Industrial Mobile Belt Grinder for Metal The CORMAK PSM200 is an industrial-grade mobile belt grinder for metal, designed for intensive grinding, deburring, and polishing of large surfaces, weld seams, and workpieces that are difficult to process on stationary machines. Thanks to its integrated dust extraction system and compact design, it enables efficient operation in changing workshop conditions and directly on assembly sites. Main Advantages Belt grinder with dust extraction – the integrated dust extraction system provides a clean and safe working environment. Mobility and compact design – ideal for workshop and assembly applications. Robust construction – the rigid frame ensures high machining accuracy even under intensive use. High grinding efficiency – optimized for grinding surfaces and weld seams. Adjustable depth stop – enables precise control of the material removal depth. Easy and quick operation – ergonomic design and a simple control system. Construction and Technology The CORMAK PSM200 is based on a robust construction designed to ensure stability and vibration damping, significantly improving operating comfort and precision. The 2.8 kW motor, powered by a single-phase 230 V supply, provides sufficient power reserve for continuous operation. The machine is equipped with a Ø200 × 300 mm flap wheel, ideal for smoothing edges, flat surfaces, and irregular metal surfaces. The integrated dust extraction system improves operator safety by reducing exposure to grinding dust. Precision and Performance The CORMAK PSM200 grinder has been designed for demanding industrial applications. The large working tool diameter and precise control of the machining depth enable consistent results, even when processing large workpieces. The adjustable grinding depth allows the operator to adapt the machine to the specific task, minimizing setup and changeover time. Applications The machine is designed for: welding and metalworking workshops, manufacturers of steel structures, railings, and tanks, industrial plants processing components that are difficult to clamp, service and maintenance teams, work carried out directly at assembly sites or in serial production. Standard Equipment Ø200 × 300 mm flap wheel Dust extraction system with filter Robust construction with adjustable depth stop Power cable with 230 V plug Protective housing for working components Technical Data Parameter Specification Power supply 230 V Motor power 2.8 kW Flap wheel size Ø200 × 300 mm Iisdpfxszynnyj Ahnsg Packaging dimensions 700 × 1000 × 600 mm

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1730 € 1 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min 3.5 kW Ijdsynmw Djpfx Ahnjig 1025 mm 600 mm 1000 mm 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: defective spare-parts repository (used), For dismantling – spindle drive defective – without coolant system. Ijdpfszxmdwox Ahnjig

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Iisdpewrmcpjfx Ahnjg Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding length: 1,350 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, grinding width: 90 mm, type of input current: three-phase, input voltage: 400 V, grinding height: 30 mm, grinding spindle motor power: 2,200 W, overall weight: 455 kg, grinding wheel diameter: 150 mm, input frequency: 50 Hz, input current: 3 A, operating speed: 22 mm/s, Equipment: rotational speed infinitely variable, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm Iiedpfxszytw Hs Ahnjg The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Isdpoywntyefx Ahnoig Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung