Used Press Corner for sale (14,556)

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Fpsdpfxoywdpdo Agfef Adjustable margins. One set of blades included. Compressed air powered.

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Fpsdpfx Aoywdn Togfof Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: good (used), Sperr & Lechner SL II A-100 Hydraulic Bookbinding Press Ready for operation. The machine is like new. The press has a built-in hydraulic unit. Piston rod area (main plate): 580x440mm Single piston rod area: 440x280mm. Fjdjywdmvjpfx Agfspf Irreplaceable in bookbinding for the production of books, pads, etc. Weight: 600kg. 380V power supply. Made in Germany.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Fpedpfxeywdmpe Agfef Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Fsdpsyz T Anjfx Agfepf Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Presto HG20R Fpodpfx Agex Svx Tefsf Compactor container for roll-off trucks 3 units available 20 m³ usable volume Top-hinged discharge door Dual-sided hook uptake Split lid over the filling opening, opening left/right Prepared for ramp operation Machines are overhauled, checked, serviced, and repainted in the desired standard RAL color. We are happy to provide an offer including delivery. Images are reference photos of machines of the same type we have manufactured.

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available. Fjdoyzcwhepfx Agfepf

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg Fodpfx Aeyzcvwogfjpf 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Operating manual available

Condition: used, Year of construction: 2005, Offer includes: Heidelberger Printmaster 52-4, Fjdpfx Agjv U U A Refopf Year of manufacture 2005, Print count: approx. 143 million, Autoplate, Classic Center,

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm Fodpfx Ajyzd I Uogfspf -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: excellent (used), Through-feed System (of the furniture cabinets) Electro-mechanical pressing system Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Fpjdpfx Aoyzh I Ssgfof Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4400 approx Electronic programmer PLC «OMRON» Total installed power (Kw) 8,8 approx With in-feed conveyor (motorized belt) With out-feed conveyor (motorized belt) SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 250 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Fpodpfxjyy Hgqs Agfsf Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquetting Press! Top condition! Like new! Immediately available! Private sale (no VAT can be stated)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press designed for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is engineered for reliable continuous operation and offers high energy efficiency, as well as a compact design for easy integration into existing production lines. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput: up to approx. 180 kg/h Fjdoy Af T Ijpfx Agfjpf Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil volume: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm The machine has seen minimal use and is in very well-maintained condition. Reason for sale: underutilization. Test run possible on site. Loading on site available. Original operating manual (Hungarian) included. A German version can be provided by the supplier if required. The integrated hydraulic system is equipped with automatic oil preheating and oil cooling functions. This ensures an optimal temperature range for the hydraulic oil, even at low ambient temperatures or during prolonged operation. This makes reliable 24/7 continuous operation possible. The asking price is fair considering the condition and very low operating hours. Short-notice viewing by appointment possible. If interested, I look forward to your message.

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm Fpodpfxoyx Hxwe Agfof 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Fpjdpoyz Af Eefx Agfjf Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco Fpedpfx Ajxvnwtjgfef Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: used, Year of construction: 2008, functionality: fully functional, Material: min 12 microns and up to 250 g/m2 Fsdpfx Agev Ah S Uefspf Width: 430 mm Mechanical speed max:200 m/min Printing repeat: from 304.8 mm to 635 mm (12" to 25") Double side tape: 0.38 mm Flexographic plate thickness: 1.14 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Offer consists of: • Year of manufacture: 2020 • Impressions: approx. 64 million • SW4 perfecting • FAPC fully automatic plate change • ALV2 extended delivery Fodpfxoyyyb Uo Agfspf • 18,000 sheets/h • 'CX' carton package • ErgoTronic ColorControl • Extended camera system • Tecnotrans Beta.f • New rollers: replaced in 2025 Comprehensive technical documentation available on request. Video available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,500 h, machine/vehicle number: 963, Universal Walking Vibropress for Multilayer Production: For efficient mass production of: - Small-format elements such as paving stones and blocks in multilayer production - Special elements such as curbstones, palisades, culverts, manhole rings, and relieving rings in single-layer production The machine is designed for the manufacture of large-scale vibropressed components. Production on vibrating table: Maximum production area: 1,240 mm x 1,000 mm Maximum product height: 650 mm Fsdpsxz Egcefx Agfopf Maximum product height in multilayer production: 250 mm Minimum product height in multilayer production (on pallet): 40 mm Maximum height (transportable) of multilayer package including pallet: 640 mm Production on the ground: Maximum production area: 1,240 mm x 1,240 mm Minimum product height: 250 mm Maximum product height: 1,200 mm

Condition: new, Year of construction: 2014, screw press filter 5,5 kw , new never used Fedpfx Agsyy Rl Refopf

Condition: used, Year of construction: 1977, height of profile 60 mm 60 Fodpfsp Raitex Agfepf weight of the machine ca. 188 kg dimensions of the machine ca. 0,85 x 0,45 x 1,25 m - Fabr.-No.: 292539 - pneumatic clamping head

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t Fpsdpfsucgqwsx Agfef d lower table 22t

Condition: used, This press brake will be auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Fpjdpfx Aoyzdlmjgfsf

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN CNC Back Gauge Fjdpfx Aslqwvksgfspf Quick Change Tooling

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm OZU-318 100x80° R=20 H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL Fpodpfx Agsyzh Sdofof No response to offers or requests for lowest price.