Used Production Of Construction Materials for sale (43,204)

Condition: excellent (used), Marinus Machines V&G 400 Series, Through Feed End Matching Machine suitable for fixed or random lengths as needed Bwjdpeydii Iefx Abceh Maximum working length up to 6m, Minimum working length: 500m/m Total Power: Appr: 32kw, Tooling included. 400v 50hZ 20 pieces per minute possible depending on length. PLC Controls. Complete Safety Enclosure.

Condition: excellent (used), Egg layer Henke Trip for manholes 1000mm and cones - 2 moulds manhole1000 and cone 1000 Bwodpfxoyftkfo Abcoh - 30 base rings

Condition: used, mileage: 5,58,082 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, maximum load weight: 10,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: ABS, air conditioning, hydraulics, traction control, This offer is non-binding. Errors and prior sale are reserved. If a foreign currency is specified, it will be converted at the current daily rate. The valid currency is that of the vehicle location. Automatic gearbox / automated manual transmission, power steering, anti-lock braking system (ABS), traction control system (ASR), retarder, fifth wheel coupling, high-roof cab, upper bunk, lower bunk, air conditioning, air-suspended driver's seat, electronic stability program (ESP), driver airbag, central locking, radio, ADR FL, AT, power take-off (PTO). Bsdpfeygy Umsx Abcewh

Condition: used, mileage: 5,68,285 km, power: 368 kW (500.34 HP), first registration: 08/2019, fuel type: diesel, maximum load weight: 10,000 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, hydraulics, traction control, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is indicated, it is based on the current daily exchange rate. The currency of the vehicle's location is valid. Automatic transmission / automated manual, power steering, anti-lock braking system (ABS), traction control system (ASR), retarder, fifth wheel coupling, high-roof cab, upper bunk, lower bunk, air conditioning, air-suspended driver's seat, electronic stability program (ESP), driver's airbag, central locking, radio, ADR FL, AT, power take-off (PTO). Bwjdpfoygy Utox Abceh

Condition: used, tank capacity: 1,500 l, GENERAL Design: Container Remarks: Frame made of V2A/V4A; manway diameter approx. 455 mm; one opening at the cone end, diameter approx. 600 mm (closure for this opening is missing) Overall width: 1,200 mm Overall height: 1,890 mm Overall length: 1,200 mm Location: Bremen Nameplate: Volume: 1,500 liters Bjdsyclv Ispfx Abcowh Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: pharmaceutical industry TANK Bottom: conical bottom Support type: frame EQUIPMENT Manhole/Dome: in the top head Note: manhole cover is missing

Condition: used, tank capacity: 590 l, GENERAL Design: Container Remarks: Frame made of V2A; Internal dimensions approx. 1100 x 700 mm; Wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (presumably Teflon); Outlet design may vary on some containers (see last 3 photos) Total width: 810 mm Total height: 1,200 mm Total length: 1,230 mm Top: Open with loose cover Location: Bremen Volume: 590 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Pharmaceutical TANK Bottom: Conical bottom Supporting structure: Frame Bwsdoyck Dwopfx Abcjh EQUIPMENT Note: Signs of use

Condition: used, tank capacity: 760 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); Cleaning certificates available; Disc valves not present on all containers, some only with flanged closing caps (see photos); Housings of disc valves made of aluminum Overall width: 1,050 mm Overall height: 1,710 mm Overall length: 1,250 mm Location: Bremen Nameplate: Volume: 760 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: plant protection chemicals TANK Bottom structure: eccentric conical Bedoyci Nxepfx Abcswh Support type: Frame EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: 250 mm Note: Signs of use

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small window production consisting of: W. ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings (fitting type can be changed with additonal costs on request!)!) ----- Technical manufacturer's description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable -Protective and extraction hood with extraction nozzle diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Working length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screws -Protective cover and extraction hood with extraction nozzle diameter: 180 mm -Automatic brake with speed monitoring Studio table: -Swivel range +/- 65 degrees -Automatically changing counter blade (programmable) -Pneumatic clamp -High-precision electric degree display -Automatic length compensation -Counter blade for every angle setting in the cutting plane Special equipment: -Laser for workpiece positioning -Pneumatic saw position -Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools -Suction connection nozzles 2 x 120 mm -Spindle length 270 mm -Counter stop ruler with fine adjustment and turret head -Triple stroke, cycle height max. 90 mm -Glass bead cutting saw with protective and extraction hood 80 mm diameter -8 roller feed device with stand and hold-down arm, required for glass bead cutting saw setup -Pneumatically controlled pouring device for edge gear, speed 6000 rpm -2x 3kW motor -Mounting diameter 30 mm ----- 3) Oertli tool for Haberkorn and Okoma machines -1 set of wooden windows IV 68/78/88 -1 set of wood-aluminium windows IV 68/78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine -Corner and shear bearings + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x olive drill head 24 mm -1x corner bearing double head -Maco MultiMatic fitting -1x adjustable folding stop on the left with 6 stops Bsdpfx Aboxa Hi Nscjwh -1x adjustable folding stop on the right with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping -----...

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer Bwedpfx Aeycwvajbcoh 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: new, functionality: fully functional, Custom-tailored personal quotation Bsdpfex Ug Hyex Abcowh

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Bsdsyddfdopfx Abcjwh Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2019, condition: used, CE mark: yes General condition: good Technical condition: good Visual appearance: good Bsdpoyg U T Rsfx Abcswh Remanufactured: Yes Max. working load: 625 kg Transport dimensions (LxWxH): (L/B/H): 2,45 m / 0,83 m / 1,74 m Please contact Tobias Mayr for more information

Condition: excellent (used), COMPLETE TETRA PAK LINE MODEL TBA9 200ml SLIM FILLER TBA9/200S, V120, YOM 1993, 52.000 RUNNING HOURS Bwedpfxovvn Ayj Abcsh TSA 36 STRAW APPLICATOR U-form TETRA PACKER TCBP 50-030 WRAP AROUND TETRA MULTISHRINK TMS 63-050V, packing 2X3 CONVEYORS SYSTEM THE LINE IS STILL IN PRODUCTION

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L Bwodsydk Ifepfx Abcoh with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: excellent (used), Soup production line The installation has been used very little Ready for operation Bedpfoyc E Rfsx Abcjwh

Condition: excellent (used), Mayonnaise production line. The machine is ready for operation. Bwsdsyc E Nzepfx Abceh

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Bsdpfshlnzkox Abcjwh Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Bedpfx Abjd N H A Nocowh Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: ready for operation (used), functionality: fully functional, Manufacturer: BENHIL Model: 8311 Junior Capacity: approx. 50 packs/min Format: 125-g block Bodoyg Nziepfx Abcswh Product: Butter and Margarine Folding: Bottom fold Condition: Good, fully functional Offer Description – Benhil 8311 Junior Butter Packaging Machine For sale is a Benhil 8311 Junior butter packaging machine (Brand: Benhil / Hastamat), suitable for the hygienic and efficient packaging of butter and spreadable fats. This machine is a proven solution for dairies and food processing companies seeking consistent packaging quality and reliable performance in a compact design. The Benhil 8311 Junior is specifically designed for small to medium production volumes and stands out for its robust mechanics, service-friendly modules, and user-oriented construction. Ideal for operations requiring a dependable machine for standard formats or for those looking to set up an additional line as a backup or for expansion. Highlights / Advantages • Proven Benhil technology for butter packaging • Compact "Junior" design – space-saving and easily integrated into existing lines • Clean, uniform packaging quality • Solid industrial construction, low maintenance and service-friendly • Suitable for dairies, butter processing, and packaging facilities Condition / Availability • Condition: used, fully functional • Inspection: possible by appointment • Availability: immediate / ex stock Contact: If interested, we are happy to provide further pictures/videos, technical details, and available accessories upon request.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: Bwodpfxoxzqa Uj Abcsh You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: ready for operation (used), The PHR-1200 is a hydraulic press designed for compacting refractory materials to form bricks, blocks or shaped pieces from refractory powders or mixes, by applying high pressure to achieve the desired shape and increase the material's density. The system is equipped with two robotic islands dedicated to loading and unloading the forming line. Bsdpfx Aewvhwijbcswh Contact us for more information on the technical specifications.

Condition: used, mileage: 7,17,000 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1840 4x2 tractor unit * Euro 6c * Long-distance cab with 1 bed Bsdjyg T T Aopfx Abcswh * ACC adaptive cruise control * Lane assist * Blind spot assistant * Differential lock * Leaf-air suspension * Automatic climate control * Auxiliary (parking) heater * Heated seats * PTO (power take-off) * Radio/CD * Navigation system * Xenon headlights * Alcoa alloy wheels * Electric windows * 1st owner * ADR FL/AT (hazardous goods certified) * Unladen weight 6,750 kg * Multiple units available

Condition: like new (used), functionality: fully functional, Offered are 11 material silo containers, each with a capacity of 500 to 1,250 liters, equipped with a dual extraction box. The containers are in very good condition and come from a cleanroom production facility where only PP material was processed. Bedpswpp Ebefx Abcswh

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Bodpfx Aboybcfkjcswh Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Condition: used, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: diesel, color: yellow, tire size: 710x26,5, tire condition: 40 %, Year of construction: 2016, operating hours: 16,600 h, machine/vehicle number: A080191, Equipment: additional headlights, air conditioning, cabin, lighting, Ponsse Buffalo 8W forwarder K100 crane, Grippen 035 grapple Central lubrication system LED lighting 2 previous owners Bwsdpewd E Tkofx Abceh