Used Profile Milling for sale (14,283)

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Ncodpfex Iugusx Adwol Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring Ncodpfxex Npmro Adwol - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage control

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Nsdpfx Aoxl R Hvedwocl Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Nodpfx Ajx Sx R Ssdwscl Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA brand boring mill (Origin Italy) Spindle taper: SK 50 Accessories / Special features: • 1 rotatable axis (left/right) • Manual tool clamping with drawbar Nedpfxjyc Nhho Adwscl • Suitable for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, swivels left-right, manual tool draw, ... Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Ncedpfxju E Nwbe Adwel

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Ncodpfeqhkm Sox Adwol

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Ncsdpownyi Iofx Adwsl Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools MAPPS4/MSX-853 IV control system Ncodpfx Ajwg D Thedwol

Condition: used, tool clamping area 0 mm weight 0 t Nodsd Ihcaepfx Adwscl Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available: Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm cutter up to incl. 15 mm 15€/pc. from 15 mm up 20€/pc.!

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m Njdpfx Adexndahjwocl

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW Ncjdpju Sbfdefx Adwel weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Nsdsv Ai N Uepfx Adwscl

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Ncodpfxjycczzj Adwol Control panel positioned on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/ 9000 rpm Height adjustment approx. 150 mm Space requirement approx. 1300 x 1100 mm Weight approx. 850 kg Further technical details on request All data taken from a brochure, therefore all information is provided without guarantee.

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Nedpfx Ajya U Uujdwscl Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: used, Year of construction: 2015, x-travel 4.000 mm y-travel 2.100 mm Nodpfx Asyb S Eaodwocl z-travel 1.000 mm taper ISO ISO 50 Number of revolutions 5.000 rpm table-size 4.020x2.010 mm table weight 12.000 Kg Control Heidenhein iTNC530 Tools place 32 fach rapid taverse 15.000 mm/min weight of the machine ca. 39 t dimensions of the machine ca. 10680x5600x5100 m

Condition: excellent (used), functionality: fully functional, Carousel Milling Machine FMC Number of units: 1 Unit configuration: Milling head Pneumatic material clamps Availability: July 2026 Nsdpfxsx S Dylj Adwocl

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub spindle, parts catcher, short bar loader, high-pressure pumps, tool holders. Ncedpfx Aoycwwwjdwjl

Condition: excellent (used), Machine type: Drilling and milling machine Year of manufacture: 2014 Nsdpfsyc Hgusx Adwocl Drilling capacity in steel: approx. Ø 50 mm Thread cutting capacity: M26 Spindle speed: 32 - 2340 rpm Tool holder: MK ISO 40 (DIN2080) Quill stroke: 145 mm X-axis travel: 585 mm Y-axis travel: 240 mm Table clamping surface: 800 x 250 mm Table swivel range: +/-45° Table rotation range: +/-45° Weight: approx. 800 kg Dimensions (W x D x H): approx. 1500 x 1380 x 2250 mm Condition: very good Accessories: Various, according to drawers, see pictures

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm Ncjdpfx Aox Tpt Hedwsl spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar Ncsdpfxexa Egms Adwjl - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard Njdpfjxhdqgsx Adwjcl - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: good (used), MAchine come with toolholders. Ncjdevk Ng Aopfx Adwol

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Ncsdewzbq Tepfx Adwel Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Ncjdpfx Adjxbpp Uowel Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt