Used Profiling Machine for sale (66,399)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 240054, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Artech, controller model: Computer, number of rollers: 3, power: 30 kW (40.79 HP), Equipment: emergency stop, Production company sell good condition profile bending machine with tools. Nkjdpfsxv Sbvsx Adwet

Condition: ready for operation (used), Year of construction: 1984, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: No.315, No.316, No.317, No.327, grinding width: 100 mm, grinding length: 250 mm, table length: 400 mm, grinding height: 130 mm, table width: 225 mm, grinding spindle speed: 3,300 rpm, Equipment: rotational speed infinitely variable, For sale are 4 (four) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 3 machines are in full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Fourth machine serial No.327 is the same working condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. Nodpswh Udtofx Adwjkt For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 4 machines together.

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Nkjdpeg Rn Iasfx Adwot Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: excellent (used), Schlebach Mini Prof Plus profiling machine Nkjdpfxsx A S Ame Adwjt The machine is equipped with: - Hand roller shear RS for cross cutting - Roller shear LS for longitudinal cutting before profiling - Electromechanical length measurement - 400V connection

Condition: excellent (used), Schlebach SPA RS LS Profiling machine for continuous production of angled standing seam with 25 mm seam height. The machine is equipped with: Nkodpjx A Sz Nefx Adwst - a hydraulic cutting unit for precise right-angled cut-off of strips after profiling, - millimeter-accurate length measurement, - RS rotary shears for cross cutting, - LS rotary shears for longitudinal cutting.

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Nksdpfx Ajx Azt Iedwot Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm Nodpfx Adox A Iviowjkt

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Nkjdpfjrknnfox Adwet Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Njdpfx Adert Hurewekt

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Nkjdpfsxpi Elex Adwjt Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Hardened standard rolls Movable control panel separated from the main body Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Nkedpow Smibjfx Adwst Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Nkjdsw Smi Ijpfx Adwjt Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Njdpow Smhwefx Adwjkt Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis Njdpfsd A Nb Hjx Adwokt - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2023, shaft diameter: 80 mm, Profile bending machine AHB 80 - electro-hydraulic ring/profile bending machine - hydraulic bottom roller adjustment - Hydraulic side roller adjustment Nksdpoqxcy Hjfx Adwet - Lower shafts individually adjustable - Three driven rollers - divided roller segments - digital display - touch screen - Hardened shafts and standard rollers - Hydraulically adjustable side straighteners - Can be used horizontally and vertically - Mobile control panel - CE mark / declaration of conformity Shaft diameter 80 mm hardened Fully hydraulic Motor 400 Volt 50 Hz 3 ph. Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 3 ROLLERS HORIZONTAL USED MACHINE Njdpfjxzgnnjx Adwokt INTERNAL CODE: SVR 370

Condition: good (used), Year of construction: 2018, 80 mm pipe diameter. Nksdpfx Aova Htfedwot 12 metres length cutting.

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Nsdpsw D Uqxjfx Adwjkt Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg Nksdsxyyynjpfx Adwst

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Nkodpfx Aexyyyhsdwot Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Njdpfx Adoxyyx Rjwjkt Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: used, functionality: fully functional, Year of construction: 2021, shaft diameter: 60 mm, overall weight: 970 kg, total length: 1,400 mm, total width: 950 mm, total height: 1,450 mm, power: 4 kW (5.44 HP), type of input current: three-phase, Akyapak APK 61 is a high durability machine designed for pipe and profile bending operations. With its ST-52 steel construction and powerful motor, it provides precise and efficient bending of various metal profiles. Technical Specifications: Number of Cylinders: 3 Shaft Diameter: 60 mm Njdpfsv Hckmsx Adwekt Bending Speed: 6.4 m/min Motor Power: 4 kW Machine Weight: 970 kg Dimensions (LxWxH): 1400 x 950 x 1450 mm Featured Features: Structure: Robust and reliable design with ST-52 steel construction. Drive System: Driven rotation system with hydromotor and gears minimizes the risk of material slippage. Roll Shafts: Hardened, ground and special steel made roll shafts. Control Panel: Ease of use with a movable control panel separate from the machine. Working Position: Horizontal and vertical working capability. Certificates: CE, ISO 9001-2008, TSEK and TURQUM certificates and registered production quality. Standard Accessories: A set of standard rolls. Digital display for lower rolls. Manual lubrication system. Side supports that can be manually adjusted in one direction.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15360599, spindle speed (max.): 2,800 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 383 mm, disc diameter: 300 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 383 mm Maximum grinding area: 600 x 350 mm Standard magnetic table size: 600 x 350 mm Grinding wheel diameter: 300 mm Spindle speed: 2,800 rpm Clamping surface: 820 × 350 mm Maximum table load: 400 kg Table speed: 0.005–35 m/min Rapid traverse (cross and vertical movement): 4,000 mm/min MACHINE DETAILS Control system: Siemens Electrical Data Operating voltage: 400 V, 3-phase Mains frequency: 50 Hz Machine weight: 2,200 kg Nkjdpfxsxnwm Us Adwst EQUIPMENT - Coolant system - Automatic grinding wheel dresser

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 4110BC19, control type: CNC control, MACHINE DETAILS Performance Data Connection: 380 V Frequency: 50 Hz Nsdpfxexxklxo Adwjkt Rated power: 35 kVA Fusing: 63 A EQUIPMENT CNC control

Condition: used, 25/11/2025 Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Nkodpjxr Ncvefx Adwot Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg