Used Prokuwa Plastic Gmbh for sale (72,939)

Condition: used, tank capacity: 25,000 l, GENERAL INFORMATION Features: Crane lugs Design: vertical Remarks: 2 different manufacturers (see pictures) Internal diameter: 3,200 mm Total height: 5,331 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 70 °C Max. permissible operating overpressure: 3.0 bar Support design: Feet Location: Outdoor storage France Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Volume: 25,000 litres Jacket volume: 70.0 litres Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,000 mm Previous application: Food (Isomalt) VESSEL Specific gravity of medium: 1.35 (t/m³) Bottom: Conical floor Number of feet: 5 pcs HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm EQUIPMENT Manway / dome: in cylinder (approx. 350 x 450 mm), in top head (DN 400) Outlet: Flange DN80 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Pgjdjxqbz Uspfx Aa Dog Top wall thickness: 3 mm

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Pgedpfexqa Slex Aa Dog Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Pgjdpfx Aotxykfsa Djg Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Second row of knives

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Psdpfx Aondn Agja Degg Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Pedsng Exaspfx Aa Dsgg Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm C99 controller with operating panel VAST XT probe head Pedpfxowyukds Aa Dogg VAST GOLD probe head (optional) 13-position probe changer magazine Probe change rack Probe accessories Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software Further options available on request Available at short notice Delivery without the automatic feed unit shown

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, Psdof Uc Urjpfx Aa Degg with cooling bath, puller and winder with guiding device

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Pgsdpfsx El A Usx Aa Dsg Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2012, functionality: unexamined, We are offering this used UV curing oven for rims, year of manufacture 2012. Podpfx Ajx Svznja Djgg The buyer purchases the device as inspected, with the exclusion of any liability for material defects. The seller shall also not be liable for claims for damages—regardless of the legal reason—unless the seller, its legal representatives, or agents have acted with gross negligence or intent. The seller assigns any existing claims for material defects against the manufacturer, its seller, or other third parties to the buyer. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Pedpfx Aaoflrhqo Djgg Manhole cover 400mm with clamping ring

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Pgedpfx Aevtyf Isa Dog Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: new, Brand new, heatable/coolable stainless steel container with double jacket/thermoplate and insulation Bases available! Item number: 10712 Volume: approx. 270L Type: standing design on three feet Design: with thermoplate and insulation Material (in contact with media): 1.4301 stainless steel Surface: IIId, satin finish on the outside Inside weld seams: ground Operating pressure: ATM Operating pressure thermoplate: +1.8 bar Max. operating temperature: 95°C Top base: conical base 15° Bottom base: conical base 60° Podpfxov Durks Aa Degg Container dimensions: Outer diameter: approx. 537mm Inner diameter: 477mm Cylinder height: 1200mm Total height: 1833mm Height of feet: 550mm Equipment: 1x thermoplate H=600mm around cyl. Part of the container, inlet/outlet 1/2" sleeve 1x insulation t=30mm rock wool for cylinder and base, welded stainless steel insulation jacket 1x dome cover DN300, clamp and seal EPDM 2x DN65 DIN11851 sight glass on the top / dome cover, provided 1x 1/2" nipple on the top 1x spray head in the container through the side wall, 360° rigid. 1x weld-in sleeve on the side, provided 1x outlet DN32 DIN11851 threaded connector 1x nameplate

Condition: good (used), Year of construction: 2010, Used heatable / coolable vacuum / pressure vessel with agitator Last use: pharmacy, cosmetics Item number:10816 Volume: 1410 liters Type: hanging Pgjdjrz Nnbepfx Aa Djg Material (wetted parts): 1.4571 / AISI316 Version: with double jacket Operating pressure according to type plate: +1/+3 bar Max. Max. operating temperature: 0/ +150 °C Tank dimensions: Manhole: 500mm Outer diameter: 1320mm Total height: 1530mm Total width: 1780mm Cylindrical height: 1230mm materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Agitator Spray head nozzle Empty weight: 955Kg

Condition: good (used), Used BECOMIX heatable/coolable vacuum/pressure vessel with agitator and control cabinet Last use: Pharmacy, cosmetics Item number: 10814 Volume: 1400 liters Type: Hanging Material (wetted parts): 1.4571 / AISI316 Version: with double jacket Operating pressure according to type plate: +1/+2.5 bar Max. Max. operating temperature: 0/ +139 °C Tank dimensions: Manhole: 500mm Outer diameter: 1320mm Total height: 1620mm Total width: 1636mm Cylindrical height: 1200mm materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Pgjdjrz N Ngspfx Aa Deg Equipment: Type plate: yes Agitator spray head Switch cabinet 600x500x2000mm Documents: yes

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Psdpfx Aotdgkxoa Dogg Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: excellent (used), Used heatable/coolable agitator tank with anchor agitator Type: CILC3000TPRWA Item number: 10865 Last intended use: Food Volume: Approx. 3150L Pgedpfx Aewfnpqsa Dsg Type: Upright design on four height-adjustable feet Design: Min. 2mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Internal weld seams: Ground Operating pressure: Atmospheric Thermoplate operating pressure: Max. 1.8 bar Operating temperature: Max. +95°C Top plate: Central cross member with two hinged lid halves Bottom plate: Conical bottom with central outlet Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2700mm Feet height: 580mm Equipment: -Thermoplate (double jacket) for heating/cooling, H=1000mm, around the cylinder. Part of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -Thermoplate (double jacket) for heating/cooling on the bottom of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -1x hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in a 90° open position) -2x metal grates below the hinged lid as anti-soap protection, screwed, removable -Cross braces welded between the feet -1x agitator flange connection -1x spare connection DN50 DIN11851 on the top plate with blind cap -Outlet DN50 DIN11851 Handle extends to the front, adapter shaft, guide plate -1x nameplate Agitator: Anchor agitator Max. viscosity: 20,000 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTFGH/1.5-10 Power: 1.5 kW Speed: 0-11 rpm Operating voltage: 3PH 400 V Material in contact with product: 1.4301 stainless steel -Motor and gearbox manufactured by Getriebebau NORD -Gearbox with food-grade oil filling -Solid agitator shaft with double bearings in the gearbox -Agitator shaft balanced for smooth running across the speed range -Anchor agitator made of 60x60 square tube, welded design -Stainless steel flange with EPDM V-ring seal Agitator control: CEE plug-in switch on the tank with on/off switch, phase inverter, zero-voltage release, and emergency stop, pre-wired Continuous speed control of the agitator motor via a compact, external frequency converter, manufactured by Optidrive Operating voltage: 3PH 400V

Condition: new, Brand new stainless steel container Article number: 10846 Volume: 550 L Type: Standing on a plastic pallet Material (in contact with the media): Stainless steel V2A / AISI 304 Number of fixings: Plastic pallet Bottom: Dished bottom Podpov Dunfofx Aa Djgg Max. operating pressure: Atmospheric Container dimensions: Inner diameter: 815mm Outer diameter: 890mm Total height: 1330mm Cylindrical height: 1070mm Total width: 890mm Materials: Inside: 14301 / AISI 304 Outside parts: 14301 / AISI 304 Facilities: Nameplate: no Outlet diameter: 50mm Distance from drain to floor: 160mm

Condition: good (used), Year of construction: 2001, Used stainless steel container with insulation Last use: Pharmacy Item number: 10820 Pgodpfsth Sc Nsx Aa Dog Volume: 5540L Operating pressure: +3/-1 bar Max. Operating temperature: +150 °C Type: Vertical on 4 feet Material (wetted parts): 1.4404 / AISI316 Design: Insulated Base: Dished base Tank dimensions: Cyl. height: approx. 1600mm Total height: approx. 3100mm Height of the feet: 800mm Outer diameter: 2000mm Distance from drain to floor: 120mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Rock wool insulation Flanged top floor Various connections on the top floor Dome cover on the top floor

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Pgsdpfx Aajr A Enge Djg Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Psdpfxju Ngqtj Aa Dsgg Distance drain to floor: 265mm

Condition: good (used), Used stainless steel process vessels Article ID: 10302 Volume: 200 l Type: Standing on wheels Material (media contact): V2A / AISI 304 stainless steel Number the fixations: 4 rolls Floor:-Torispherical head Top shelf:-Torispherical head removable Working pressure according to the nameplate: ATM Dimensions tank: Inside diameter: 670mm Outside diameter: 690 mm Height of feet: 220mm Distance from drain to floor: 1 340 mm 2. 330 mm Total height: 1700 mm Total width: 1020 mm Materials: Inside: V2A / AISI304 Exterior parts: 1.4301 / AISI304 Podpfx Aasd H Tvze Dsgg Facilities: Plate: No Outlet: bottom valve Various connectors Top shelf, removable Control box Propeller Rühraorgan available

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable Pgsdpjd Sw Dfefx Aa Deg

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Pjdpfx Aaov Ha Uis Dogg Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Pgsdpfouy Ribox Aa Dsg Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Pgjdpfjrl Rrtsx Aa Djg Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator