Used Prokuwa Plastic Gmbh for sale (72,298)

Condition: new, Year of construction: 2023, Industrial heavy duty trailer with a payload of 30 tons on 60% of the loading area at 6 Km/h. The trailer has heavy duty Vulkollan drums with a height to loading area of 510 mm. Itjdpfx Aekz Uyuebcsd The loading area has the dimensions 6000 x 2400 mm. The transport floor is lined with 40 mm spruce The steering is all-wheel steering and the drawbar is 1600 mm long with drop safety device and forged towing eye with hole 40 mm. On the outer frame there are 6 stops for securing the load on each long side. The paint is in RAL 2000 or 2004 in new production gladly on customer request.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 5083, travel distance X-axis: 440 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 210 mm, For sale: B3000 Dosing Machine in very good overall condition Due to the closure of our site, we are selling our B3000 dosing system, which is only two years old. The machine has had minimal use and currently has an accounting residual value of CHF 120,000. Additionally, a credit note worth €9,000 for spare parts procurement for this machine from BDtronic will also be included in the sale. The machine will remain set up until January 2026 and can be inspected in Mendrisio. Please note that it is currently out of service and will require a complete maintenance check before being recommissioned. Therefore, a live demonstration in operation is not possible at this time. Technical specifications: - Sequential dosing of three different resins or foams - Delivery rate: 1–4 g/s Materials processed: - Elantas Elan-tron PU 505 HR/PH3 - Elantas Elan-tron PU 505 LR/PH3 - Elantas Micares X1080 R14/P 978 Further technical details and dimensions can be found in the attached PDF documentation. Itodpsxzpdxsfx Abced Inspection available by appointment. Dismantling and transport to be organized by the buyer. Dismantling can be supported by BDtronic, which has estimated 3 days work at €2,770 per day.

Condition: new, functionality: fully functional, machine/vehicle number: 0700, empty load weight: 3,700 kg, maximum load weight: 50,000 kg, overall weight: 53,700 kg, axle configuration: 4x2, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 880 mm, total length: 6,600 mm, total width: 2,200 mm, total height: 880 mm, tire size: 559x356, tire condition: 100 %, maximum speed: 6 km/h, color: orange, Heavy-duty transport trolley with a payload of 50,000 kg over 60% of the loading area at 6 km/h. Dimensions: 5000 x 2200 x approx. 880 mm Transport floor: Douglas fir, 50 mm, countersunk and bolted Tyres: Cushion tyres 559 x 356, 8-ply Steering: All-wheel steering with adjustable track and tie rod Drawbar head at front and rear for towing drawbar Trailer is suitable for operation in both directions Coating: RAL 2000 Four welded lashing eyes on each longitudinal side Accessories: One double-acting chock Documentation fixed in the DOKU box on the frame Reflectors on three sides Towing drawbar 2000 mm with fall protection and height adjustment Iedpsyq Rr Rsfx Abcstd

Year of construction: 1998, condition: used, Heat Exchanger / Table Cooler Güntner Type S-GFH 066A/2x6L Manufacturer: Hans Güntner GmbH Type: S-GFH 066A/2x6L Year of manufacture: 1998 Itedpfoyrdxmex Abcod Permissible operating overpressure per TRB 401: 16 bar Permissible operating temperature per TRB 401: 95°C Volume in liters: 199 Fan – Type/Number: FH 065 – SDK.41.6 (ZA 121265) Net purchase price: €7,000 plus legally applicable VAT. VAT will be shown separately on our invoice. Subject to change, error and prior sale. Sale is made without warranty or guarantee, exclusively to commercial customers. Enquiries will be processed Monday to Friday from 8 am to 4 pm.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm Iedpfxsyh Ndwj Abcotd machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Itodpfxjfifbbs Abcsd immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Ijdpfx Abjfifa Ascjtd Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table Itsdpfxsgu N E Dj Abcjd -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Suitable for steel, copper, non-ferrous metals, and stainless steel. Itsdjyrl Nyjpfx Abcod

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm Itedpfx Absw Et Ilocod - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: VE500034, overall weight: 25 kg, load capacity: 3 kg, arm reach: 584 mm, pivoting range: 360 °, controller manufacturer: fruitcore robotics GmbH, controller model: Horst Control, teach pendant manufacturer: fruitcore robotics GmbH, teach pendant model: Programmiersoftware horstFX, control cabinet width: 313 mm, control cabinet height: 446 mm, input voltage: 230 V, input current: 2 A, type of input current: AC, repeat accuracy: 0.05 mm, Equipment: documentation/manual, We offer this almost new fruitcore robotics GmbH Horst600 industrial robot, year of manufacture 2021. Itedpfx Absyrdnuecsd

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, The HT500Y-4 Mini Crawler Dumper is ideal for construction, landscaping, agriculture, and operations in confined spaces. Iodpfxoyqxw Is Abcotd Equipped with rubber tracks, a hydraulic tipper, and a powerful lifting function, this dumper offers excellent off-road capability, stability, and easy operation. The machine stands out for its compact design, high payload capacity, and reliable Briggs & Stratton petrol engine. ⚙️ Technical Specifications Engine & Drive: - Engine: Briggs & Stratton - Engine type: 1-cylinder, OHV, 4-stroke, air-cooled - Displacement: 203 cc - Power: 6.5 HP at 3600 rpm - Fuel: Petrol - Tank capacity: 3.6 liters Performance & Capacity: - Maximum payload: 500 kg - Unladen weight: 550 kg - Skip capacity: 200 dm³ - Tipping angle: 100° - Tipping system: Hydraulic Dimensions: - Machine dimensions (without pedal & skip): 1570 × 880 × 1450 mm - Machine dimensions (with foot pedal & skip): 2050 × 880 × 1450 mm - Skip dimensions: 1050 × 730 × 730 mm - Undercarriage width: 700 mm Lifting & Height: - Maximum lift height: 1020 mm - Maximum dumping height: 970 mm - Tipping clearance: 220 mm - Ground clearance: 110 mm Undercarriage: - Track width: 180 mm - Track ground contact length: 1000 mm - Track gauge: 520 mm - Turning radius: 1150 mm - Speed: 2.88 km/h - Gradeability: 20° - Rubber tracks for optimal ground traction ✅ Features & Benefits: ✔ Removable protective container ✔ Simple control via operating lever ✔ Folding stand-on platform for flexible use ✔ Very compact – ideal for tight job sites ✔ High stability thanks to tracked undercarriage ✔ Low-maintenance petrol engine Applications: - Construction & renovation - Landscaping - Agriculture - Stable & yard work - Material handling in challenging terrain Condition & Delivery: - New/unused, current production - Factory tested, ready for immediate use - Supplied with full standard equipment - Available from the second half of January - Europe-wide delivery by freight carrier available - Multiple units available upon request NET PRICE: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries welcome!

Condition: new, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 1,850 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, HT20 PRO Mini Excavator – 2.0 t | Cabin • Air Conditioning • Top Equipment Act now! The HT20 PRO stands out as a powerful, premium mini excavator in the 2.0-ton class, designed for professional applications in construction, landscaping, and municipal operations. Compact, powerful, and reliable – delivering maximum performance in confined spaces. ⭐ YOUR ADVANTAGES AT A GLANCE ✔ Original Kubota Engine – durable & economical ✔ Precise load-sensing hydraulics ✔ Enclosed comfort cabin with heating & air conditioning ✔ Adjustable undercarriage – ideal for narrow construction sites ✔ Robust premium steel construction ✔ Ready for immediate use from stock ⚙️ ENGINE Kubota D902, 3-cylinder diesel Itsdpfox Hvvhsx Abcsd Output: 11.8 kW Very low fuel consumption Smooth and low-vibration operation HYDRAULICS Two-stage cast hydraulic pump Load-sensing valve Travel motor with 2 speeds Reinforced hydraulic lines WORK PERFORMANCE Side-swing boom (left/right) Digging depth: 1,995 mm Reach: 3,130 mm Dump height: 1,930 mm UNDERCARRIAGE & STABILITY Variable track width: 970 – 1,270 mm Undercarriage made of manganese steel Cast iron counterweights Rubber tracks with 3-ply steel cord Gradeability up to 30° COMFORT FEATURES ✔ Enclosed cabin ✔ Air conditioning & heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat ✔ Excellent all-around visibility INCLUDES – 3 ATTACHMENTS ✅ 20 cm trenching bucket (replaceable teeth) ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready to go for any job site! ➕ OPTIONAL AT EXTRA COST ✔ Hydraulic quick coupler (The hydraulic quick coupler shown in the images is not included as standard and is available separately) ✔ Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm + extensions) SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Europe-wide delivery possible CERTIFIED & SAFE CE certification 2006/42/EC | 2014/30/EU | 2011/65/EU ⭐ PROMOTIONAL NET PRICE: €14,900 ⭐ Location: Rheda-Wiedenbrück Viewing by appointment ONLY FOR A LIMITED TIME – PRICE NEGOTIABLE! Enquire now and secure your advantage!

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Itodpfxjyizxrj Abcsd Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical details: Iodpfx Abewiu Smocotd Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement Itsdpfjyn Inwex Abcjd - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. Itedpfjdrtansx Abcjd For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Itjdpfx Aewg Hlasbcjd and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. Ijdpfsynz Idex Abcotd - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Good day, We are pleased to offer you, without engagement, a nearly new walk-through metal detector, model SDM 600 PLUS/PZ (stock item) by CEIA. Manufacturer: CEIA GmbH, Wiesbaden, Germany Model: SDM 600 PLUS/PZ, featuring integrated, highly sensitive MI2/MSD sensors in both antenna panels Year of acquisition: 2022 Possible areas of application: Security checks at airports, cargo facilities, government and correctional institutions, government, industrial, and nuclear facilities, public large-scale events, trade fairs, congresses, checkpoints, access control in high-security areas, etc. Itsdpjyq Nggsfx Abcod Technical data and description: - Very high throughput with speeds of up to 15 m/s and a reset rate of 0.2 s - High discrimination rate for personal items (glasses, belt, keys, watch, coins, etc.), meeting the strict standards of airport security screening - Compliant with law enforcement standard NIJ-0601.02, specifying requirements regarding sensitivity, discrimination, and immunity for law enforcement and correctional facilities - Future-proof with upgradable options for mobile phone detection or fully automatic temperature measurement - IP66 certified control unit (ICE 60529) - Bluetooth, infrared, and RS-232 communication - Random alarm generation - Usable passage dimension 720 x 2050 mm (W x H) - Power supply 100 to 277 V, 47 to 63 Hz - Operating temperature -20°C to +65°C - Relative humidity 0 to 95% (non-condensing) - Transport package dimensions 2400 x 800 x 420 mm - Weight without pallet approx. 74 kg - For detailed technical description and application options, please refer to the manufacturer's PDF flyer. Note: This device is a nearly new stock unit. The metal detector was assembled only once for photographic purposes, then disassembled and repacked in its original packaging. It was intended for employee screening in a sensitive high-security area of a service company but was never put into use. The original installation, operating, and maintenance manuals, as well as a quick start guide and CE declaration of conformity, are included in the package. Please note: The above technical data was taken from the operating manual, manufacturer’s brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 unit metal detector CEIA, model SDM 600 PLUS/PZ We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Iodpeydqk Hofx Abcjtd ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2024, - Frame and edge press 1-sided/stationary - Useful dimension in mm as frame press 2630 x 1610 - Useful dimension in mm as edge press 3000 x 1610 - outer dimensions in mm 3200 x 2090 x 730 - Sturdy welded frame construction made of thick-walled profile tubes and laser-machined sheet steel parts ensure a torsion-free and dimensionally stable press base frame (no bolted frame parts!) - with left abutment, sliding carriage for width adjustment and central locking system and 2 hand hydraulic press units with Ergo handle - 3 vertical pressure beams type SK with roller bearings, made of strong-walled profile tube, galvanized, with hand hydraulic press units incl. Ergo handle. 20000 N pressing force, 60 mm stroke. Pressing units adjustable in 50 mm hole grid. - Lower abutment with fail-safe device, 5-fold adjustable in the hole grid. - Hold-down device with spindle press pressure - Chassis with 4 swivel castors (2 with brakes) - Powder coated (glue repellent) grey white RAL 9002 Pressure plate and abutment gentian blue RAL 5010 Iodpfx Aohd Nywjbcotd - Version Quattra 1-SK is equipped with comfort adjustment of the hand hydraulic press units and thus offers additional safety for the operator

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Itsdpfx Aepy Uzyebced Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer, without obligation, a pre-owned forced air drying oven / drying cabinet from Binder, model FD 53. Manufacturer: BINDER GmbH, Germany Ijdpfxeypv Ihs Abcjtd Model: FD 53 Article number: 9010-0082 Year of manufacture: 2015 Temperature range: +5°C above ambient to 300°C Heating-up time to 70°C: approx. 7 min Heating-up time to 150°C: approx. 24 min Heating-up time to 300°C: approx. 60 min Spatial temperature deviation at 150°C: approx. 6.7 +/- K Interior volume: 53 L Internal dimensions: 400 x 400 x 340 mm (W x H x D) External dimensions: 640 x 660 x 630 mm Max. number of shelves: 5 units Shelf dimensions: 385 x 300 mm (W x D) Max. load per shelf: 15 kg Permissible total load: 40 kg Weight (empty): 44 kg Electrical supply: 230V, 50/60 Hz Current consumption: approx. 5.3 A Rated power: 1.2 kW Energy consumption at 70°C: approx. 172 W Energy consumption at 150°C: approx. 429 W Energy consumption at 300°C: approx. 951 W Temperature controller: Microprocessor PID controlled Safety class: 2 (DIN 12880) Controller function (timer): 0–99 hours Areas of application: These units are suitable for precise temperature control of non-hazardous materials, as well as for drying and heat treatment of solid or powdered materials and bulk goods by means of heat input. The ovens can also be used for drying items such as glassware and for hot storage of liquids in containers. Note: The forced air drying oven / drying cabinet is in good condition, fully functional, and can be tested under power in our workshop. Note: The above technical data is taken from the manufacturer’s operating manual, brochures, or other sources. We cannot guarantee the accuracy and completeness of this information. Scope of delivery: 1 x Forced Air Drying Oven / Drying Cabinet, Manufacturer: BINDER GmbH, Model FD 53 We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Itjdpfjyplwfox Abced Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH