Used Prokuwa Plastic Gmbh for sale (71,965)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 Gedswf Rgrjpfx Alfoub --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust Godpfx Aljy Sixtefoub - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Gsdpfx Aoy Sixmolfoub Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Mini Cube Nero 1.0 from Villex Container GmbH is a versatile 4.0-meter container that combines a compact footprint with a surprisingly spacious interior. Measuring 4.0 m in length, 2.4 m in width, and 2.6 m in height, this model offers more space than smaller alternatives while remaining easy to transport. Its 5 cm thick insulation ensures effective thermal protection, while the anthracite-colored panels and base frame (RAL7016) provide a modern and stylish look. The container is equipped with a robust steel door and a standard window (1000 x 1000 mm) for ample natural light. Electrical fittings include a 32A CEE plug, three double power sockets, two LED lights, and a light switch. Weighing just 800 kg, the Villex Mini Cube Nero 1.0 is lightweight, highly portable, and suitable for a wide range of applications. Article number: MINCN1.0 Version: 4.0 m container Length: 4.0 m Width: 2.4 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Guedpfx Aley H Huzjfsb Weight: 800 kg Doors: 1 steel door Windows: 1 standard window (1000 x 1000 mm) Electrics: 32A CEE plug, red; 3 double sockets; 2 LED lights & 1 light switch

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 800 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, We are offering our Villex Mini Cube Nero 2.0 container in this listing, which can be used as an office container, school container, kindergarten container, refugee container, residential container, or construction site container. Dimensions: 4.0 x 2.4 x 2.6 m Delivery: Nationwide delivery available Standard Features: Condition: New & Fully Assembled Exterior color: RAL 7016 (anthracite) Exterior wall thickness: 50 mm Area: 9.6 m² Weight: 800 kg 1x entrance door (205 cm x 105 cm) 1x double window -> single sash, fixed glazing, and tilt function Electrical installation: 6x electrical outlets (3x double sockets), circuit breaker + protection, surface-mounted conduit (PVC) We manufacture your container fully customized to your specifications! Optional features available at surcharge: Custom sizes, e.g., 7x3 m, 4x2.4 m, double containers, triple units, and more Different window sizes Various exterior and floor colors Practical forklift pockets Godoy Egq Hjpfx Alfsub Lighting Roller shutters Heating WC, shower, toilet, wash basin Kitchen Plastered interior walls And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Nationwide delivery time is typically around 1–3 weeks after receipt of order, depending on the destination postcode area. Custom containers are manufactured and delivered within 1–4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 2,550 mm, Equipment: lighting, The Villex X-Series Black Short 1.0 from Villex Container GmbH is a premium 6.0-meter office container distinguished by its well thought-out features and modern design. Measuring 6.00 m in length, 2.50 m in width, and 2.55 m in height, it offers a versatile usable area of approximately 15 m² – perfectly suited as a mobile office, meeting room, or temporary workstation. Its robust construction with 75 mm thick sandwich panels provides excellent thermal insulation, making the container suitable for year-round use, even under extreme weather conditions. The sophisticated combination of anthracite panels (RAL 7016) and a deep black base frame (RAL 9005) give the container an elegant, striking appearance. Two large aluminium windows (1000 x 1000 mm) with integrated fly screens ensure plenty of light and air, providing not only natural daylight but also effective insect protection. A sturdy steel door (RAL 9005) guarantees security and durability in everyday use. In terms of electrical equipment, the Villex X-Series is fully outfitted: with a 32 A CEE heavy-duty power connection, five power sockets, two LED lights and one light switch, the container is immediately ready for use – whether for technical equipment, workspace lighting, or IT infrastructure. Despite its solid build, the container weighs only 1,500 kg, making it flexible and easy to transport. Article number: XSERS1.0 Variant: 6.0 m container Length: 6.0 m Width: 2.50 m Height: 2.55 m Insulation thickness: 7.5 cm Gedpfx Aloy H Em Njfoub Panel colour: RAL7016 (anthracite) Base frame colour: RAL 9005 (black) Weight: 1500 kg Doors: 1x door (steel) Windows: 2x windows with fly screens (1000 x 1000 mm) Electrics: 5 power sockets, 2x LED, 32A CEE plug & 1x light switch

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Guodpfx Aleytr Swsfsb Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm Gsdpogu Nmhefx Alfeub - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max Guodpfx Aleg Dvdcjfob - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Gjdpfotr U Hljx Alfjub Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" Gujdpfx Alsttah Refeb → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max Gujdpfx Alox Ebzqjfjb - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 Guedpfxjy Rmwds Alfjb ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2006, operating hours: 1,609 h, functionality: fully functional, machine/vehicle number: 61008195, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 2,500 bar, injection weight: 183 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 750 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The fully hydraulic CX series features particularly compact, efficient, and flexible two-platen machines. The very compact two-platen concept with cantilevered clamping provides generous space for peripheral equipment and optimal accessibility. Efficient and intelligent energy management with BluePower servo drive provides a powerful foundation to meet the highest demands and delivers the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM • MC6 with TFT colour touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: 800 kN • Max. mould opening force: 55 kN • Clear space (h x v): 470 x 420 mm • Mounting plate (h x v): 670 x 670 mm • Minimum - maximum mould installation height: mm (specify values if known) • Maximum daylight: 750 mm • Maximum mould opening stroke: 500 mm • Ejector drive: hydraulic • Ejector stroke: 150 mm • Ejector force forward/backward: 23/10 kN • Ejector speed forward/backward: 760 / 800 mm/s • Maximum mould weight: 1000 kg INJECTION UNIT • Screw diameter/type: 40 mm / Standard (adaptable) • Effective L/D ratio: 20 • Injection pressure: 1860 bar • Stroke volume: 201 cm³ • Shot weight at max. stroke for PS: 183 g • Injection speed: 100 mm/s • Injection flow rate: 126 cm³/s • Screw drive/speed: 295 rpm • Plasticizing rate (standard): 12.3 g/s • Nozzle contact force: 50 kN ELECTRICAL PARAMETERS • Connected load: 15.0 kW • Installed heating capacity: 10.9 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 3.55 t • Length x width x height: 3.96 x 1.48 x 2.02 m ADDITIONAL FEATURES • Wear-resistant plasticizing • BluePower full insulation for plasticization cylinder • Open nozzle • 1 additional heating circuit for nozzle heating • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Hydraulic core pull, single (BWAP) • Euromap interface for handling: E18, E63 Guedpfoy Rlmwox Alfeb • Euromap interface (central computer): E67, E77 • Adaptive Process Control (APC) • Injection-compression mode • Graphical analysis package The machine is located at our factory in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Medium Sales Container Cube Nero 1.0 from the Nero-LINE series is a compact and functional sales unit, measuring 5.0 meters in length, 3.0 meters in width and 2.6 meters in height. Its robust construction and modern design in RAL7016 (anthracite) provide a sophisticated appearance, while the 5.0 cm thick insulation ensures efficient thermal performance. The container is equipped with a sturdy steel door insulated with mineral wool and a large sales window (4000 mm x 1200 mm) including roller shutters, making it ideal for mobile retail or food service applications. Electrical equipment features a 32A CEE power connector (red), three double power sockets, two LED lights, and a light switch—ensuring the sales area is well-lit and ready for use. A sales counter is included in delivery and supplied separately; installation is to be carried out by the customer on site, as a permanently installed counter would require a special permit for crane-truck transport. With a weight of 1,100 kg, the container is both stable and versatile—perfect for events, markets, or stationary sales. Individual customization is available upon request. Item number: MEDVKCN1.0 Area: 15 m² Variant: 5.0 m container Length: 5.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Gjdpjy Hrm Ajfx Alfeub Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,100 kg Doors: 1x door (steel) Windows: 1x sales window incl. roller shutters (4000 mm x 1200 mm) Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Equipment: 1x sales counter (counter supplied loose and to be assembled by customer)

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 600 kg, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Turnkey assembled, in stock & available for immediate delivery Dimensions: Length: 3.0 m Width: 2.4 m Height: 2.6 m External area: 7.2 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Wood cladding: RAL 7016 Weight: 600 kg Door: 1x PVC glass door, double glazed Windows: none Electrical installation: In accordance with VDE standard 3-phase, 32A CEE plug (red) 2x double sockets Lighting: 1x lamp 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (for an extra charge): Double-wing doors: For wider access and greater transport options. Additional doors: Flexible access points. Additional windows: Increased ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting conditions. Roller shutters: Privacy and sun protection for adjustable light control. Glass façade: Bright appearance with fully glazed front. Woodstyle façade: Timber-look finish for a warm and aesthetic appearance. Divided rooms: Flexible usage options thanks to additional room separation. WC: Integrated sanitary facility for greater comfort. Shower: Addition to sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm or 120 mm. Forklift pockets: For easier transport with forklifts. ----- Delivery: Nationwide delivery with crane vehicles available. Gjdpfx Alsy Egt Ijfeub To calculate a delivery price, please provide your postal code. Delivery time: 1-4 weeks, depending on distance and availability (standard containers or custom builds).

Condition: repair required (used), Year of construction: 2010, conveyor belt length: 3,000 mm, conveyor belt width: 500 mm, The plastic slat conveyor belt shown in the photos is for sale. The drive unit is missing (it was transferred to another belt), but the conveyor belt itself is in perfect condition. Gjdpey Nczpjfx Alfsub

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Gedsw Ivqmspfx Alfsub Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Gujdpfxju Ey Dls Alfjb Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Guodohc T Nlopfx Alfsb

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Big Cube Block Line Black 2.0 by Villex Container GmbH is a modern 6.0-meter office container featuring the BLOCK-LINE design, known for its robust construction and versatile applications. With a length of 6.0 m, width of 3.0 m, and height of 2.6 m, it offers generous space for a wide range of uses. The 5 cm thick insulation ensures effective thermal management, keeping the interior comfortably tempered. Anthracite-colored panels (RAL7016) and the base frame give the container a contemporary and stylish appearance. The container is equipped with a double-glazed glass door and two floor-to-ceiling windows (1000 x 2000 mm), which allow for abundant natural light and create a bright working environment. The electrical fit-out includes a 32A CEE plug (red), three double power sockets, two LED lights, and one light switch. Weighing 1,000 kg, the Villex Big Cube Block Line Black 2.0 remains easily transportable while providing a high-quality, functional solution for modern office or workspaces. Item number: BCBLB2.0 Version: 6.0 m container Godpfsy Hkvpjx Alfsub Length: 6.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,000 kg Doors: 1 x door (glass) Windows: 1 x floor-to-ceiling window (1000 x 2000 mm) & 2 x glass elements Electrical equipment: 32A CEE plug, red; 3 x double sockets, 2 x LED lights & 1 x light switch Includes air conditioning for heating & cooling We manufacture your container individually to your specifications! Optional features available at extra cost: • Custom dimensions, e.g. 9x3 m, 4x2.4 m, double container, triple unit, and more • Various window sizes • Different colors • Floor colors • Practical forklift pockets • Lamp • Roller shutters • Heating • WC, shower, toilet, washbasin • Kitchen • Plastered interior walls • And much more Delivery is usually made with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1–2 weeks after order receipt, depending on postal code region. We manufacture and deliver custom containers within 1–4 weeks. Collection and inspection at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna can be arranged by appointment during business hours by prior telephone arrangement.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Ready for immediate delivery, turnkey and in stock Dimensions: Length: 6.0 m Width: 3.0 m Height: 2.6 m External area: 18.0 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Block Line cladding 3.0: RAL 7016 Weight: 1,300 kg Door: 1x PVC glass door, double-glazed Windows: 2x floor-to-ceiling, vertical PVC windows (100 x 200 cm), double-glazed, tilt-and-turn function Electrical installation: According to VDE standard 3-phase, 32A CEE plug (red) 3x double power sockets Lighting: 2x lamps 1x light switch Gedpfxjy Hkbxe Alfeub Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (at extra charge): Double-leaf doors: For wider access and improved transport options. Additional doors: Flexible access options. Additional windows: Enhanced ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting. Roller shutters: Privacy and sun protection for light and visibility control. Glass façade: Bright ambience thanks to fully glazed front. Woodstyle façade: Wooden finish for a warm, aesthetic appearance. Separate rooms: Flexible use of space through additional room partitions. WC: Integrated sanitary unit for greater comfort. Shower: Addition to the sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm, or 120 mm. Forklift pockets: Easier handling with forklifts. ----- Delivery: Nationwide delivery possible with crane vehicles. To calculate the delivery price, please provide your postal code. Delivery time: 1–4 weeks, depending on distance and availability (standard container or custom-built).

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers shown in the images are in stock and immediately available. Inspection and collection possible. This offer includes Villex Big Cube Long Doppio Nero 1.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, and construction site containers. Dimensions: 6 x 3.0 x 2.6 m Delivery: Nationwide delivery possible Standard features: Gsdpjy Hidrofx Alfeub Nlobsy Hgv Eetb Txx Rsa Condition: New & Assembled Exterior color: RAL 7016 (Black/Anthracite) Interior color: Walls -> White, Floor -> Wood look blue & grey (dark) Exterior walls: 50 mm thick Area: 18.00 m² Weight: 1300 kg 1x door (steel) 2x double windows (2000 x 1000 mm) Electrical: 32A CEE plug, red. 3x double power sockets, 2x LED lights & 1x light switch We manufacture your container completely according to your individual needs! Optional extras available for a surcharge: Custom dimension, e.g. 7 x 3 m, 4 x 2.4 m, double containers, triple units, and much more - Various window sizes - Various colors - Floor color options - Practical forklift slots - Air conditioning - Lamps - Roller shutters - Heating - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1-2 weeks nationwide after receipt of order, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2026 completely new PLC machine control (no pitney bowes control) Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year Gsdpfx Alodyk Sdjfoub

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Container in image in stock and available for immediate delivery. Viewing and collection possible. We are offering Villex Big Cube Vertikal Nero 1.0 containers in this listing, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, residential containers, or site containers. Dimensions: 6 x 3.0 x 2.60 m Delivery: Possible nationwide Standard Features: Condition: New & Assembled Exterior color: Anthracite + Black (as shown in the photos) External walls: 50 mm thick Area: 18 m² Weight: 1300 kg 1x Door (glass) --> Aluminium, RAL9005, double-glazed 2x Floor-to-ceiling windows (1000 x 2000 mm) -> Aluminium, RAL9005, double-glazed Electrics: Gsdpfx Ajy Hidlelfoub 3x Double sockets, circuit breaker + fuse Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Delivery time for stocked standard containers nationwide is approx. 1-2 weeks after order placement, depending on the ZIP code area. Custom containers can be manufactured and delivered within 1-4 weeks.