Used Return Device for sale (13,300)

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input Njdpfxszt S Hms Ab Ujdb • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, power: 16.18 kW (22.00 HP), fuel type: gasoline, gearing type: hydrostat, KÖPPL Hydro Athlet Professional - Hydro tool carrier with 85cm reversing tiller Technical details: Briggs & Stratton Vanguard 2-cylinder four-stroke petrol engine 22hp with electric start Gearbox: stepless hydrostatic drive with Steering bar: rubber-mounted and height and side adjustable without tools Tires: 23 x 8.50 - 12 AS Hydraulic axle adjustment Catch hook flange Fuel: unleaded petrol Accessories: 1. Portal axle 2. KÖPPL SVU-85 reversing tiller This KÖPPL HA Hydro tool carrier is in a well-maintained overall condition with the usual signs of use and wear for this class of device, major customer service recently carried out, ready for immediate use! The sale is made as a used machine with no return, guarantee or warranty. - Gross price €13,990 // Net price €11,756 - Viewing / test drive possible! Njdev Ecm Eopfx Ab Uedb - Shipping costs €220 nationwide via freight forwarder! - Financing / leasing can be requested individually for you!

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € Ndedpfx Ajwirdteb Usb 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 37,910.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Njdst Hxagopfx Ab Usdb Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Ndjdpfx Abjzwvu Ne Uob Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Njdpfxsymi Nae Ab Uodb OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit Ndsdpfx Aszuyp Ssb Ujb - Conformity marking: Including complete documentation and CE

Condition: ready for operation (used), Vertical – Rausch Milling Machine Type RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal milling: largest workpiece diameter 600 mm External milling: area of the clamping plate 600 x 340 mm Coolant system Traction force measuring device Central lubrication, automatic Spindle protection with coil spring spirals Chip conveyor Cycle counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping by freight forwarder. We will gladly assist you in organizing cost-effective shipping. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Nedpjdyp Rmjfx Ab Ujdb Subject to prior sale. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. The machines and tools are sold as is. The assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Ndjdpeyl Ipcofx Ab Usb Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Ndsdpfx Aeuiy Ngjb Ujb Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Ndsdpfxot Hwucs Ab Usb Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. Nsdszlulpspfx Ab Uedb voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg Ndsdpfot Hw N Hex Ab Usb dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, functionality: fully functional, working width: 450 mm, area performance: 495 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 45 l, TASKI PROCARPET 45 PROFESSIONAL CARPET AND RUG CLEANER TECHNICAL DATA: Model: Procarpet 45 Manufacturer: Taski Type: Carpet and rug cleaning machine Country of manufacture: Switzerland Series: Professional Condition: NEW Ndodjy Aw A Uopfx Ab Usb Theoretical capacity: 495 m²/h Weight when empty: 55 kg Working width: 450 mm Brush motor: 650 W Suction motor: 1000 W Solution tank: 45 l Waste tank: 45 l Brush speed: 1000 rpm Brush pressure: 10-17 kg Cable length: 15 m Rated voltage: 230 V Dimensions: 82 x 56 x 86 cm (L x W x H) WHY CHOOSE THE TASKI PROCARPET 45 The Taski ProCarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large surfaces, its 45 cm working width and large tanks (45 liters each) allow for long-lasting cleaning without interruption and increase work efficiency. One of its greatest advantages is the 2-in-1 system, which allows you to choose between a thorough extraction wash and a quick capsule cleaning. In practice, this means you can adjust the method to the level of dirt and time – from deep cleaning to quick refreshment with a short drying time. Another major advantage of this machine is its efficiency. The cylindrical brush and powerful suction system with two suction points ensure thorough dirt removal and very good carpet drying, resulting in a better end result and a faster return to use. Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning. - The machine is equipped with a 45 cm diameter brush and a 45-liter tank, perfectly combining compactness with the ability to clean larger surfaces. Designed for everyday, intensive use. - The Taski Procarpet 45 is a robust, durable, and reliable device, designed for long life and professional use.

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) Nsdpfezvduusx Ab Uodb - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: used, Year of construction: 2002, gebraucht 2002 4543 prompt, Zwischenverkauf v Spanien 11400 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1700 mm 1500 mm 1960 mm 950 kg 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light Ndedpfx Absyrhn Ej Ueb automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 Ndodpjvz Aq Aofx Ab Ueb - Viewings possible! - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor Nodpfx Abjzuyywe Usdb - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € 1 Njdpfx Aeyrhtzsb Ujdb 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1988, gebraucht 1988 Ndjdjxx A Ekspfx Ab Uob 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm Nedpfx Abowvih Nj Uedb - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Njdjk Aa Dwjpfx Ab Ujdb Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Ndsdpfx Aozwvtxjb Ujb Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2022, Equipped with a leadscrew mechanism and safety device to prevent tool breakage. Program for single or continuous cycles. Nsdpfsy Sxq Ejx Ab Usdb Electronically controlled motor braking during single cycles. Motor with pole-reversing capability. Doubled return speed. Spindle speeds are continuously adjustable. Oil circulation lubrication. Table adjustment from the front. Thread cutting capacity, M8 to M45 in E335. Threads per hour: 600. Normal drilling capacity: 50 mm. Thread depth: 150 mm. Drilling depth: 200 mm. Overhang: 325 mm, table area: 650 × 500 mm, overall height: 2150 mm. Weight: 680 kg.

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Nsdjuzhcuspfx Ab Uedb Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!