Used Seedbed Combination for sale (4,276)

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution Rodpfx Aiszii Nqerjch – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, EA Elektro Automatik Type: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19″ Rack – Laboratory power supply 0-80V / 0-170A, 5000W For sale is a high-quality, programmable laboratory DC power supply from the renowned company EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Special features: Autoranging (flexible combination of voltage/current up to maximum power) Remote Sense (up to 2.5 V compensation) Low ripple: < 10 mV RMS / < 100 mV pp Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus Analog control (0–5 V / 0–10 V) Fan-cooled, robust industrial design. Redpfozibh Eox Airjch Technical data: Output voltage: 0 … 80 V DC Output current: 0 … 170 A Maximum power: 5 kW Form factor: 19″ Rack, 3U Efficiency: approx. 93 % Weight: approx. 20 kg Scope of delivery: (See image) EA-PS 8080-170 3U power supply Power cable (Subject to change and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine Rjdszii Dhspfx Airech from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Trumpf Type: TC 6000 L 1300 Rjdpfjzd Ulajx Airoch Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, IPG Type: Laser welding pliers LSS-5M-3500-3F Ytterbium fiber laser The laser welding pliers LSS5 M complements the series as a compact welding tool. With laser power ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser pliers Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0 kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F Rcjdpozd Rinefx Aireh 400-460V AC 3P/PE 50/60 Hz 32A/120k Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have over the phone.

Condition: used, mileage: 20,000 km, power: 390 kW (530.25 HP), first registration: 04/2026, fuel type: diesel, overall weight: 26,000 kg, fuel: diesel, color: silver, gearing type: automatic, suspension: steel, Equipment: air conditioning, airbag, central locking, cruise control, D6G Automatic climate control, M8B Air intake mounted behind the cab, M8L Cyclone pre-filter for coarse dust, M7T Regulated water pump, M7T Water pump, regulated, M7I Insect screen in front of the cooling system, M5V High Performance Engine Brake, G5B Twin-plate clutch, N6Z Transmission oil cooler, G5G Mercedes PowerShift 3, Z5M Single PTO, Z5S PTO pump mounted below the upper edge of the frame, F1B M cab ClassicSpace 2.30 m, tunnel 170 mm, F2B Floor variant, tunnel 170 mm, F2G Cab width 2.30 m, F2U ClassicSpace, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Tinted windshield with band filter, F8V Light sensor, F8W Rain sensor, D8A Roof hatch/vent flap in the roof, F0Y Mirror cover, construction vehicle, F6I Heated front mirrors, F6R Air horns, cab roof, F8B 2 remote control keys, F8E Locking system with central locking, F8F Comfort locking system, F8H 2 extra remote control keys, D1D Driver's air-suspension seat, climate control, D1N Co-driver's functional seat, D2N Seat back release, driver's seat, D2W Armrests, both sides, co-driver's seat, D2Y Seat belt control, D3K Seat cover, Dinamica star black, driver's seat, D3L Seat cover, Dinamica star black, co-driver's seat, D0A Leather steering wheel, S3A Airbag, driver, D4Y Side sun visor, driver's side, 218 Rear view camera, E6Y Rear warning system combined with hazard warning lights, J2Z CB radio, E5H Night driving light switch, E6A Trailer socket 24 V, 15-pin, L1C LED daytime running lights, 045 LED taillights, 238 Lane keeping assist, S1I Distance keeping assist, 513 Traffic sign recognition. We are available by phone Monday - Friday until 8:00 PM and Saturdays until 4:00 PM!! Rcsds Agwb Espfx Aireh Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 132 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,140 kg, total length: 5,065 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Redpfx Aiez Ewg Horsch Mast type: Duplex Transmission: ZF 3WG171 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We will also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG180-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Side shifter, fork positioner Fork carriage with central leveling; fork positioner opening range: 600 / 2355 mm Rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certificate, scale, Central lubrication system; 1 rear-view camera on the roof with monitor in the cabin, 1 camera in the mast in combination with the rear-view camera, tire pressure monitoring; engine heater 220 V; Grammer Actimo XL air-suspended driver's seat including seat heating, Forrex fire extinguishing system.

Condition: used, mileage: 10,000 km, power: 390 kW (530.25 HP), first registration: 05/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Jost fifth wheel coupling. Saddle height 970 mm + 1,160 mm. * Lowliner ----TV system with satellite system. ----* 12-speed automatic transmission * Lamp bracket on the cab roof * Air-sprung front axle * Front axle 8.0 t * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase 3,700 mm * Steering, Servotwin * Aerodynamic side fairings * SoloStar Concept (seat/lounge combination below) * Driver's air-suspended seat, comfort * Comfort bed above, wide, adjustable * Shaving mirror * Electric sunblind, 1-piece * LED ambient lighting, driving and living area * StyleLine * Stationary air conditioning, electric * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Noise and heat insulation, cab * Sliding/lifting sunroof, glass version * Seat box, lowered by 40 mm * Trailer socket 24 V, 15-pole * Reversing warning system combined with hazard warning lights * NATO socket * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Air deflector, lockable, with end flap * External sun visor, transparent * MirrorCam * ExtraLine Basic * Locking system, with central locking * Comfort locking system * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * PowerShift Advanced * Driver's seat heater * Tires 295/55 R 22.5, rear axle * Tires 355/50 R 22.5, front axle/front lift axle/rear lift axle * Air suspension, rear axle Lowliner * Sound system * Navigation system * Axle load measuring device * Reversing camera * Fuel tank 390 liters * AdBlue tank 60 liters * Fuel tank 290 liters * Automatic high beam/low beam and cornering lights * LED main headlights * LED turn signals in light signature * 1 LED work light below, center * Headlight cleaning system * Rotating beacon left and right * Engine OM471, R6, 12.8 l, 390 kW (530 hp), 2600 Nm * Engine version Euro 6, E * 3rd generation engine OM471 Rcjdpjzrqwbjfx Airsh * High Performance Engine Brake * TruckLive * Safety Pack * Sight Package, with LED headlights * Climate Package with noise/heat insulation * Actros L * Economy Package * Driving Package * Comfort Package * Actros Driver Extent * Towing hitch, rear * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring system * Active Drive Assist 2 * Airbag, driver * Cruise control * Actros model generation 5 * MB ATS warranty according to general terms and conditions from initial registration 3 years/450,000 km * Refrigerator in drawer under bed * EBS * Without spare wheel ----For sale to commercial businesses only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m Rcedpfezrpn Sox Aireh permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m Rcedpfx Aiszrpqmsroh with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 201001071, For sale is a universal lathe, VDF Boehringer DUS 400 ti. The machine is in very good condition. It combines the flexibility of a conventional lathe with the precision and speed of a CNC machine (teach-in method). Technical data at a glance: • Manufacturer: VDF Boehringer (Germany) • Model: DUS 400 ti • Year of manufacture: 2004 • Control system: Heidenhain • 3-jaw chuck • Center distance: 250 mm • Distance between centers: 1000 mm • Quick-change tool post • Tailstock • Adjustable protective guard Accessories: • Workbench with mounted vise • Telescopic drawer cabinet (7 drawers) Rcjdpfxj Ad Abao Airoh • Tool cabinet (Bedrunka + Hirt) Contents: • Hand tools, turning tools, holders, general turning accessories Attractive offer – flexible & worry-free We offer not only a high-quality product but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: used, Year of construction: 2008, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - VAC-100a, 2x VAC-100m and VAC-100c Collating Towers - SA-40 Shingle Conveyor - ST-40 Stacker - ACF-30 Accumulator and Folder - SPF-30S Saddle Stitcher - HTS-30 Three-Knife Trimmer - TB-30 Transport Belt Key Features: - 40 stations - U-shaped layout: Efficient space utilization and easy monitoring Redpfj Adz N Njx Airsch - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,120 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), CATALOGUE NUMBER 7762 TECHNICAL DATA PLANER: - cutterhead width 320mm - 3-knife cutterhead - max thickness of the workpiece 180mm - guard for the planer cutterhead Rodszx Sf Hopfx Airjch - from top: – feed rollers – toothed feed roller – cutterhead – smooth feed roller CIRCULAR SAW: - max blade diameter 300mm - max cutting height 80mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 270mm - table dimensions 750x460mm - guide ROUTER: - spindle 30mm - spindle adjustable up/down - spindle height 100mm - guide - diameter of dust extraction nozzle 100mm - dimensions L/W/H 1700x2400x1100mm - weight 340kg ADVANTAGES – Bulgarian production – very good condition – multi-functional, used Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Redpfx Aeh U Rzgoirech Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser source manufacturer: MAX Photonics, laser power: 1,500 W, laser wavelength: 1,080 nm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, table length: 600 mm, table width: 800 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, workpiece weight (max.): 50 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,500 kg, total length: 1,600 mm, total width: 2,000 mm, total height: 2,000 mm, door opening width: 600 mm, door opening height: 800 mm, height adjustment type: electric, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with a 1.5 kW fiber laser (New machine) Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. - Highest precision - Machine bed made of natural stone - Drives via YASKAWA linear motors (and, of course, linear guides) - Axes measured and adjusted with Renishaw measuring system (with protocol) - Pneumatic sheet metal clamping - Highly precise cutting machine - 1.5 kW laser source from MaxPhotonic - Extremely fine fiber (20µm) - Travel range approx. 600 x 800 mm - Machine control in German - Incl. nesting module - Very easy to operate Redsx I D Nxepfx Airoch - Powerful laser chiller - Table support The following options are also available: - Raw material detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import from SolidWorks, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible through our financing partner. Sales are exclusively to commercial enterprises. Machine dimensions approx.: Width: 190 cm Height: 190 cm Depth: 180 cm Weight: approx. 2500 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. Please also note our attractive leasing/hire purchase offers. - Machine without automatic exchange table - very space-saving - extremely energy-efficient cutting system - requires only approx. 4 x 4.0 meters of installation space - 3kW laser source from MaxPhotonics (G5) suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 22mm Cutting of stainless steel sheet up to 10mm Cutting of aluminum sheet up to 10mm Cutting of brass sheet up to 6mm - Travel range 1260 x 2550mm (for medium format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection window for observing the cutting process - 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser cooler - Machine control in German - German service and spare parts supply - powerful laser cooler - Filter extraction system available as an option (5.5kW with frequency converter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Rjdpfjxa Ahnsx Airoch Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Do you need a different laser power, table shape or table size? No problem. I will gladly create a suitable offer. e.g. 2kW machine from 29,990 euros Are you not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Rcjde Adtqfepfx Airjh

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Rjdpfx Aiey Nkqfjrech Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,000 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of supply, as is first-class service. - Machine without automatic exchange table! The loading takes place on the long side of the machine. - Very space-saving - Extremely energy-efficient cutting system - Requires only approximately 4 x 4.5 meters of installation space - 6kW laser source from MaxPhotonics (G5 / CE version) - Laser generator with socket efficiency greater than 30% - Suitable for aluminum - Top quality, schedule a viewing now! Cutting of steel sheet up to 30mm (maximum) Cutting of stainless steel sheet up to 15mm (maximum) Cutting of aluminum sheet up to 12mm (maximum) Cutting of brass sheet up to 8mm (maximum) - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Comprehensive collision protection measures for the cutting head - Large laser protection windows for observing the cutting process - Extensive cutting parameter file - Incl. nozzle module - Very easy to operate. - Powerful laser chiller - Machine control in German - German service and spare parts supply - Powerful laser chiller - Filter extraction is optionally available (5.5kW with frequency inverter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (Optional) - Automatic nozzle centering (Optional) - Raw material recognition and part nesting via camera system CypVision (Optional) - Import of 3D files (.stp) and unfolding (Optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (Optional) - Nesting, calculation, remnant plate management, etc. (Optional) - ERP system can be combined with all your other sheet metal processing machines (Optional) Leasing or hire purchase is possible via our financing partner. Rcjdoxw T Nkepfx Aireh Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Do you need a different laser power, a different table shape, or a different table size? No problem. I will gladly create a suitable offer. For example, a 2kW machine from 29,990 euros. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: used, functionality: fully functional, The Dibipack 4255 EV from Italdibipack is a small, microprocessor-controlled shrink wrapping machine. Automatic adjustment of the sealing temperature to the operating cycle guarantees stable and consistent seams. The shrinking process, combined with the simultaneous sealing of the film, is completed in a single operation. The product is placed inside the film and then drawn into the shrink chamber. The hood is now manually closed and held in place by an electromagnet. The automatic cycle then begins, during which the film is sealed around the product and shrunk, conforming closely to the product's shape. The shrinking is achieved by heating the air, which is simultaneously circulated by a fan. Once the process is complete, the hood opens automatically, and the finished, packaged product can be removed. For bagging products, the film can be sealed without subsequent shrinking. Up to 8 different work programs can be stored via the control panel. Parameters such as shrink temperature, shrink time, and the sealing time of the sealing strip can be easily and conveniently adjusted on the operating panel. An electronic counter informs you about the product flow. A mobile base, which makes the Dibipack 4255 EV even more flexible, is available as an accessory. The Dibipack 4255 EV can be used to process PVC, PE, PO, LDPE, OPP, CP films, all sealable films, as well as micro-perforated and food-grade films. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. Upon request, a video of the machine can also be sent. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment / inspection & expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. Technical data: Max. output per hour: 240-360 pieces Power connection: 230 V - 1 phase Rated power: 3 kW Working table height with base: 920 mm Sealing frame L x W: 550 x 420 mm Max. product height: 200 mm Machine dimensions, L x W: 1,235 x 750 mm Max. film width: 600 mm Max. film roll diameter: 250 mm Machine weight: 87 kg Condition: used, fully functional Further details: Up to 8 different work programs can be stored. Microprocessor-controlled processes. Energy-saving standby function. Rcodpj Afdmyjfx Airjh Hood opening system with gas spring. Electronic counter. Quick and easy adjustable film unit for different product sizes. Processing of different films. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors.

Condition: ready for operation (used), Year of construction: 2018, stroke length: 160 mm, table width: 4,325 mm, total height: 2,630 mm, overall weight: 33,000 kg, product length (max.): 2,750 mm, Mechanical stamping press manufactured in 2018. This PME PE 400-1700 C features a nominal pressing force of 4000 kN and a machine weight of 33,000 kg. It has a maximum ram adjustment of 180 mm and can accommodate tool dimensions of up to 1100 x 800 mm. If you are looking to get high-quality stamping capabilities, consider the PME PE 400-1700 C machine we have for sale. Contact us for further details. - Total Power: 50 kW- Voltage: 400 V- Frequency: 50 Hz- Basic Machine Position: Top Dead Center (O.T.)- Max. Engagements in Single Stroke: 15 /min- Max. Permissible Speed of Flywheel: 290 1/min- Max. Ram Adjustment: 180 mm- Stroke Height Min./Max.: 30 mm / 160 mm- Stroke Rate Min./Max.: 10 /min / 60 /min- Max. Shut Height : 660 mm- Max. Tool Dimensions (L x W): 1100 x 800 mm- Upper Tool Weight: 800 kg- Lower Tool Weight: 2400 kg- Pneumatic System Pressure Min./Max.: 3.5 / 10 bar- Pneumatic Clutch-Brake Combination Pressure Min./Max.: 3.5 / 6 bar- Lubrication System Power: 1.0 kW- Lubrication Operating Pressure: 50 bar Technical Specification Stamping Force 4000 Kn Rsdpfxo Adp E Se Airjch

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit Rodjx S Hmzspfx Airech 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast, Type: PS 45 Year of manufacture: 2018 Technical data Manufacturer: Kaast Type: PS 45 Year of manufacture: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: L approx. 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment Redpoy Alc Nsfx Airsch - Punching station - Steel shear - Four-sided notching station - Central lubrication - Tooling system Peddinghaus red series All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Rodpfx Aiericgajrech Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Redpfx Aio Adtttsrsch