Used Seedbed Combination for sale (4,212)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Lhodpfx Aez D Ihfeb Ujl

Condition: new, Year of construction: 2024, New machine Lsdpfextgz Eox Ab Uehl Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 800 kg, Equipment: compressor, cooling unit, Güntner - Basetec GFW 090.1/3 Dry Cooler / Condenser (64 kW) – air/glycol type - Type: GFW 090.1/3-S(S) - Cooling capacity: 64 kW - Number of fans: 3 - Unit dimensions: 460 x 120 x 185 cm - Capacity: 54 L - Weight: 600 kg - Stock: 2 units (manufactured in 2016 and 2017) Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Lhedpjz Aau Rjfx Ab Uol Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT Ljdpszyay Ijfx Ab Ushl SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Lhsdpjw I U Nuofx Ab Ujl Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/1996, total length: 16,210 mm, total width: 2,740 mm, suspension: steel, wheelbase: 14,030 mm, color: other, Year of construction: 1996, Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Rear Axle 1: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Lhedsz D Tl Nspfx Ab Ujl Rear Axle 2: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Rear Axle 3: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 15,340 kg Payload: 35,660 kg GVWR: 51,000 kg Condition Damage: None Identification License plate: ZZ-80-67

Condition: like new (used), Year of construction: 2021, For sale is a Hammer A3-41 jointer-planer, a demonstration model with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in like-new condition. Technical data: - 3-system cutterhead - Planing width 410 mm - Planing length 1800 mm - Max. feed height 225 mm - Dust extraction port Ø 120 mm - Motor power 4 kW - Year of manufacture 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Lodpfez Atb Dox Ab Uohl Related terms: jointer, planer, thicknesser, jointing, planing Reference: R-A0117

Condition: excellent (used), Year of construction: 2021, For sale is a used Hammer A3-41 surfacing and thicknessing machine with a surfacing length of 1800 mm. The machine has been inspected by our qualified personnel and is in very good condition. Technical specifications: - Silent Power spiral cutterhead - Planing width 410 mm - Surfacing length 1800 mm - Max. feed height 225 mm - Dust extraction connection Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Ledpfjz Atbkex Ab Ushl Related terms: surfacing machine, thicknessing machine, planing machine, surfacing, thicknessing Reference: R-L0BHX

Condition: good (used), Year of construction: 2015, For sale is a used Hammer A3-41 surface planer and thicknesser machine with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in good condition. Technical data: - 3-knife cutterhead - Planing width 410 mm - Planing length 1800 mm - Max. stock removal 225 mm - Dust extraction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2015 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surface planer, thicknesser, planing machine, planing, thicknessing Reference: R-L0OE6 Lodez Aph Tspfx Ab Uehl

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Lhjdpfez Apgiox Ab Uol Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Ledpfx Asvz Eqxob Uehl Weight 280 kg Total power requirement 2,2 kw

Condition: used, Year of construction: 2017, operating hours: 1,459 h, Bomag BW 154 ACP-4i AM combination roller, year of manufacture: 2017, operating hours: only 1,459 h, engine: Kubota [55.4 kW/75 hp], Asphalt Manager 2, asphalt cutter on the right, weight: 7,400 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Lsdpfxozq Tzme Ab Ujhl Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2017, operating hours: 1,751 h, Bomag BW 154 ACP-4i AM combination roller, year of manufacture: 2017, operating hours: only 1,751 h, engine: Kubota [55.4 kW/75 PS], Asphalt Manager 2, asphalt cutter on both sides, weight: 7,400 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Lsdpfezq Tztsx Ab Uohl Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. Ledpfszi Nhmsx Ab Ushl The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Compact combination machine with 5 functions: Lhodpfx Ajziz E Rob Uol sawing, milling, surfacing, thickness planing, and long-hole drilling. Sliding table, 800 mm; max. saw blade 315/100 mm cutting height; milling cutter, 3 speeds; surfacing and thickness planing, 310 mm; long-hole drilling support; year of manufacture 2002; 3 kW motors; mobile base.

Condition: used, Year of construction: 2017, Two RE2 Facelift wood gasifiers, in operational condition, are available. They have already been dismantled and are ready for collection in my warehouse. Lodpfx Aboxuqpvs Uohl

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: Lhsdpfezxxqvjx Ab Ujl - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2007, Combination dough sheeter, Seewer Rondo SKO 611 Year of manufacture: 2007 Condition: cleaned and inspected 1 belt renewed Ledpfxoz A Sqzs Ab Ujhl Suitable for all types of dough (sheeting and lamination) Stainless steel cladding With computer control Belt width: 635 mm Roller width: 670 mm Roller gap: 0.3 – 45 mm

Condition: used, power: 5.5 kW (7.48 HP), planing width: 520 mm, actuation type: pneumatic, Usable working width 520 mm Total table length 2310 mm Knife shaft diameter 120 mm Planer shaft speed 5000 rpm 4 knives 35x3x520 mm Aluminum fence 1200x190 mm Fence angle adjustment from 90° to 45° Min./max. planing height 3 / 250 mm Feed rate (thicknessing) 5-8-12-18 m/min Dust extraction port diameter (planing) 120 mm Dust extraction port diameter (thicknessing) 120 mm including: Lhjdpoz Aukasfx Ab Uel Tersa knife shaft Auxiliary fence Planer safety guard Electric thickness table adjustment

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft jointer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Jointer table length 2,250 mm, 4-knife TERSA planing cutterhead, Motor 7 kW (9.5 hp); S6 5-meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously folding tables, common dust extraction hood for jointer and thickness planer D = 120 mm, thickness table adjustment via handwheel with Lhsdpfx Aexn Suaob Uol integrated display, star-delta switch, auxiliary fence, CE and BG certified for wood dust. Order No.: 5503501 immediately available from Seevetal, Ex works, without transport, subject to prior sale.

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Type: FS 51 Lhedpfez Alb Aox Ab Uel Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Table lips: low-noise Motorized automatic brake Number of knives: 4 Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and Technical Specifications: - Working/planing width: 520 mm - Max. thickness planer passage height: 240 mm - Total length of the planing tables: 2,200 mm - 4-blade TERSA planing spindle Lhedszwqdxopfx Ab Uol - Planing spindle diameter: 120 mm - Planing stop swivels up to 45° - Solid cast iron planing tables - Feed speed: up to approx. 17 m/min - Thickness planer table with height adjustment - Integrated exhaust hood

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Lsdpfx Ajzx U Nujb Ujhl Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Lhodpfxsz Agd Sj Ab Uel Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Setting gauge

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data - Capacity: approx. 40 trays/min - Formats: - 24 × 0.5 L cans - 15 × 0.33 L sleek cans - 4 × 6 × 0.33 L bottles - 6 × 4 × 0.33 L bottles - 8 × 3 × 0.33 L bottles - 3 × 6 × 0.5 L bottles - Application: Packaging of cans and bottles - Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery - Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) - Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel Lhjdoyy Sqzspfx Ab Uel - Conveyor system | Gebo | Integrated product transport - Control panel | Siemens | SIMATIC OP17 | Operator interface