Used Seedbed Combination for sale (4,143)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height Gkedpfjz Irx Nex Ap Doc - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min Gksdpfxoz Ir Hae Ap Dsc - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), mileage: 1,20,849 km, power: 105 kW (142.76 HP), first registration: 06/2020, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 9, total length: 5,930 mm, total width: 2,020 mm, total height: 2,360 mm, loading space length: 1,620 mm, loading space width: 1,770 mm, loading space height: 1,620 mm, Year of construction: 2020, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Accessories = - Tinted windows - Halogen lamp - None - Manual - Radio/cassette - Rearview camera = Notes = Configuration: 4x2, Unladen weight: 2356 kg, Gross vehicle weight: 3500 kg, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Blue, Rearview camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 105 kW (141 Hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: None, Side doors: 1, Side windows: 4, Rear closure: Double door, Central locking, Number of seats: 9, Seat upholstery: Leather, Seat adjustment: Manual, L2H1 Tourer passenger van, combination, 9 persons, air conditioning, automatic, camera, navigation, empty, PDC, cruise control, Euro 6!, Spare wheel, Tire type: Winter tires = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 2 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 2 mm Weights Unladen weight: 2,356 kg Payload: 1,144 kg GVWR: 3,500 kg Functional Loading platform height: 60 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 08.2027 Condition Technical condition: good Optical condition: good Gkedpfx Ajz Il Udjp Dec Damage: none Number of keys: 2 Financial Information Leasing price: 480 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Workshop Equipment Set – Mobile Assembly Table & Steel Storage Cabinet Used workshop equipment offered as a set for equipping an assembly, maintenance, or production workspace. The set includes: Large mobile assembly table – 1 pc • Dimensions: 2050 × 2030 × 665 mm • Perforated work surface • Sturdy metal frame with casters • Suitable for assembly work and handling large components • Reference: 48784-131 Steel storage cabinet – 1 pc • Dimensions: 500 × 500 × 1730 mm • Open-front design with two shelves and three storage compartments • Suitable for storing tools, parts, and workshop supplies • Reference: 48457-234/1 Professional work tables with metal frames – 2 pcs Internal code: 48784-234 Large, sturdy work tables with durable metal frames, spacious work surfaces, and lower storage shelves Dimensions: 1500 × 1000 × 950 mm Professional work tables – two sizes Code 48784-227 · 1500 × 1000 × 940 mm Code 48784-227/1 · 1500 × 750 × 900 mm Gsdsz Hmbcopfx Ap Djkc Work tables – three sizes Code 48784-201 · 2000 × 900 × 900 mm - 1 pc Code 48784-201/1 · 1500 × 900 × 900 mm - 2 pcs Code 48784-201/2 · 1500 × 750 × 900 mm - 1 pc Professional work tables – 4 pcs Dimensions: 1500 × 1000 × 950 mm Internal code: 48784-176 A practical combination of a large work surface and organized storage for a single workshop area. Condition: used; please see photographs. Location: Latvia. Price for the complete set: upon request. Prices exclude VAT. Please contact us for further information or to arrange a viewing.

Year of construction: 2026, condition: new, functionality: fully functional, SPECIAL PRICE + LIMITED QUANTITY iCOMBI CLASSIC 6-1/1 IN STOCK - AVAILABLE FOR IMMEDIATE DELIVERY YOU WILL RECEIVE NEW, ORIGINALLY PACKAGED GOODS NEW GOODS IN ORIGINAL PACKAGING + 24 MONTHS MANUFACTURER'S WARRANTY + The iCombi Classic is the latest combination oven from RATIONAL. The iCombi Classic 6-1/1 electric model is a true all-rounder and will quickly become an indispensable assistant in your kitchen. It replaces numerous conventional cooking appliances and is robust, powerful, and efficient. The unit has been tested in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The recommended retail price for this unit is €8440.00 net. Service: We will gladly assist you in arranging a certified RATIONAL customer service technician throughout Germany. Our service for you: Up to 2 years manufacturer's warranty High-quality branded appliances at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The iCombi Classic from Rational is easy to operate and impresses with functions that guarantee high cooking quality. This way, you, as a chef, will always achieve the results you envision. The iCombi Classic consistently delivers excellent results: thanks to the measuring and control center for a uniform, individual cooking chamber climate. Thanks to the powerful fresh steam generator for optimal steam saturation. Thanks to powerful dehumidification, more fan wheels and an optimal cooking chamber geometry. This ensures that the food is supplied with energy precisely – and, when necessary, with particular power. The result: large quantities can be cooked with outstanding consistency across all levels, with up to 10% less energy and water consumption. All for one goal: to impress as a chef with crispy crusts, delicious grill patterns and crunchy coatings. Condition: New goods, original packaging, with 2 years manufacturer's warranty Technical data: Capacity: 6 longitudinal inserts for 1/1 GN accessories Removable standard hanging racks, 68 mm insert spacing Dimensions: Body: 850 x 754 x 775 mm Overall: 850 x 804 x 842 mm Minimum door opening dimensions for transport (W x H): 800x800mm Weights: Max. load per insert: 5 kg Max. total load: 30 kg Weight of electric unit: 93 kg Connection conditions electric: Voltage: 3 NAC 400 V Power consumption electric: 10.8 kW Power consumption steam mode: 9 kW Power consumption hot air: 10.25 kW Fuse rating: 16 A Godpjz Haqqefx Ap Dskc Connection conditions water: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Year of manufacture: 2026 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 570 h, load capacity: 230 kg, empty load weight: 6,300 kg, construction height: 2,470 mm, fuel type: diesel, total length: 4,440 mm, drive type: Diesel, arm reach: 9,100 mm, construction width: 2,320 mm, working height: 16,000 mm, Articulating Boom Lift Condition: As new Technical Condition: Very good Front Tyre Type: Solid rubber Front Tyre Size: 18 Front Tyre Condition: 80 - 100% Rear Tyre Type: Solid rubber Gedpoz Iulxefx Ap Dekc Rear Tyre Size: 18 Rear Tyre Condition: 80 - 100% Description: The Manitou 160 ATJ articulated boom lift is ideal for outdoor operations on uneven or unpaved surfaces such as construction sites, gravel, or grassy areas. With a lift capacity of 230 kg, an articulating height of 7.38 m, and a working height of 16 m, it offers extensive outreach. Its diesel engine, combined with four-wheel drive and three steering modes, provides the 160 ATJ with outstanding performance and autonomy.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-12 Gkodpjz Ntwkofx Ap Djc Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its kind. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in an industrial building, in the yard, or on light terrain, the hydrostatic transmission, in combination with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 has a steering axle with an integrated cylinder, which gives it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, 4th valve, front work light, heater, full cab, full free lift, CE certificate, joystick, rotating beacon, windshield wiper, seat.

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with CoDeSys multitasking PLC For sale is a used industrial control system from the manufacturer STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment systems. Control, PLC, program management, and system visualization are combined in one system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC SE-604 power supply: 24 V DC (18–36 V) Power consumption: typically 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function System visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment systems Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and cable set as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Gkedpfsz Nvkyex Ap Doc Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpfoz Nv Hhex Ap Djkc

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x continuous combined lashing rails, 7 pairs of lashing eyes in the floor, 1 x interior light, side wall thickness and front wall thickness each approx. 17 mm, rental price from €580 per month, -- subject to printing errors, errors and changes, sample images --, more information at: !, More Details: ! Gjdpfsz Nv Urex Ap Djkc

Condition: used, Year of construction: 2008, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-100a, 1x VAC-100c Collators - 1x ST-40 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 20 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm Gjdpfoz Nw Nkjx Ap Dekc - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 38 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 2 x continuous combined lashing rails, 6 pairs of lashing eyes in the floor, 1 x interior light, side wall thickness and front wall thickness each approximately 17 mm, rental price starting from 580 EUR per month, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Godpez Rulxsfx Ap Dekc

Condition: used, Year of construction: 2005, Overview Gkjdjz Rvrmjpfx Ap Djc This Robino & Galandrino SUPERBLOC F 8 is a capsuling monobloc for wine bottles, built in 2005. It combines a capsule distributor with a rotary turret of spring-loaded spinning heads, so capsules are placed on the bottle neck and finished in one compact machine. The machine is rated at 12,000 bottles per hour. It sits in a stainless steel frame with full transparent guarding and can be visited at the current site by appointment. Technical data - Manufacturer: Robino & Galandrino - Model: SUPERBLOC F 8 - Year of manufacture: 2005 - Machine type: capsuling monobloc (capsule distributor + rotary spinning turret) - Capacity: 12,000 bottles per hour - Container: wine bottles - CE marked Equipment - Capsule distributor with capsule magazine and pneumatic transfer - Rotary turret with spring-loaded spinning heads - Bottle infeed screw, star wheels and guide rails - Control panel with display, selector switches and emergency stop - Stainless steel frame with transparent safety doors - Format parts (infeed screw, star wheels) on a transport trolley Condition Used machine, can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm Gkjdpfxjz N Dmvo Ap Djc • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: used, Year of construction: 1995, Overview This bottle washer-dryer was built in 1995 by the French manufacturer STONE. It cleaned and dried the outside of filled glass bottles ahead of labelling in a wine bottling line with an output of 6,000 bottles per hour, running 375 ml, 750 ml and 1 L formats. The machine combines a rotary washing module (LB20) with vertical rotating brushes and a 3 m air drying tunnel (S20), linked by the bottle conveyor. It is still installed and under power and can be visited on request. Technical data - Manufacturer: STONE - Model: LB20 S20 - Year of manufacture: 1995 - Machine type: bottle washer-dryer (external washing and drying) Gedpfx Apoz Rnc Rs Dekc - Output: 6,000 bottles per hour - Containers: glass bottles - Formats: 375 ml, 750 ml, 1 L - Washing module length: approx. 1,250 mm - Drying tunnel length: approx. 3,000 mm - Overall length incl. conveyors: approx. 7,050 mm, width approx. 1,528 mm - Electrical power: 2 kW - Compressed air: 6 bar (15 NL per cycle) Equipment - Rotary washing module: star wheel carousel with vertical rotating brushes for neck, body and base - Air drying tunnel with blower-fed air ducts along the bottle path - Infeed and outfeed conveyors with infeed star wheel - Set of format star wheels - Stainless steel frame with transparent guard doors - Control panel with emergency stop and separate electrical cabinet with frequency inverter - Layout drawing available Condition Still installed and under power. An inspection on site is possible on request. Dismantling and loading are not included. Availability Available immediately. Location: France.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-axis 2800 mm y-axis 2200 mm z-axis 800 mm control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min Gkodpfx Apsz Rpm Rj Dec total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: used, empty load weight: 3,000 kg, maximum load weight: 7,000 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 7,080 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 44 m³, suspension: air, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, BPW axles, with a short, through-loading ramp at the front, 2 x sets of combination lashing rails, 7 pairs of lashing eyes in the floor, 1 x interior light. Rental price starting from €600 per month. -- Printing errors, mistakes, and changes reserved. Sample images --. More details can be found at: ! Gsdpfxjz R Nfzj Ap Djkc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,068 h, functionality: fully functional, turning length: 685 mm, spindle bore: 91 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, spindle motor power: 25,500 W, rotational speed (max.): 4,000 rpm, total height: 1,950 mm, total length: 3,904 mm, total width: 2,323 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, overall weight: 5,400 kg, spindle nose: A2-8, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CLX450 V1 is a brand new machine, taken directly from production. This machine combines a stable machine structure with modern CNC technology and is designed for precise and productive machining operations. Thanks to its robust construction and powerful main spindle, the CLX 450 is suitable for a wide range of turning operations, from precision work to heavier machining processes. The machine is equipped with a Siemens SINUMERIK 840D CNC control and features a C-axis on the main spindle. This enables precise angular positioning of workpieces and allows for various angle-controlled operations. Additional options & accessories: - 19" SlimLine PLC with Touchscreen. - Siemens electronic handwheel. - Chip conveyor. - High-pressure pump (12 bar). - 3-jaw chuck (SMW AUTOBLOK 250 BB). - MARPOSS measuring arm. - Mechanical preparation for a mist extraction system. - Rotating center (MK5). - Double foot pedal for clamping/unclamping the main spindle. - Original DMG documentation. - Set of original machine feet. Gkjdpez R Nw Refx Ap Djc Weight & dimensions: 5400 kg 3904 x 2323 x 1950 mm (L x W x H incl. chip conveyor and PLC)

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. Godpfxjv Tcuxe Ap Dokc PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, I am offering for sale a Felder F900Z Z under-spindle milling machine. The machine is in VERY GOOD condition – it has been used less than it has been standing idle. It is a robust machine, ideal for precise woodworking. Its condition can be seen in the photos; it is ready for immediate use and has no hidden defects. Gsdpfoz R R Ttex Ap Djkc

Condition: used, mileage: 5,96,426 km, power: 294 kW (399.73 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 2 axles, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 315/70/R22.5, rear tire size: 275/70/R22.5, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, compressed air brake, cruise control, onboard computer, spoiler, truck registration, | Iveco Stralis 400 with 1-axle Krone SE City Cooler | Complete refrigerated semi-trailer combination | Tractor unit: Iveco Stralis 400, first registration: 15.06.2018 | Power: 274 kW (400 hp) | Engine displacement: 8,710 ccm, diesel | Gross vehicle weight: 18,000 kg | Tare weight: 7,173 kg | Refrigerated semi-trailer Krone SE City Cooler, 1 axle | Permissible gross vehicle weight: 22,000 kg | Payload: 14,780 kg | Tare weight: 7,220 kg | First registration: 15.06.2018 | Complete refrigerated semi-trailer combination with Carrier Vector 1950 refrigeration unit | Tail lift: BÄR, 2,000 kg | Errors, typos, and prior sale excepted. Viewing possible at any time by appointment. Further information is available by phone or message. Gsdpfx Aezx Rmcop Dokc

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Gjdpjz Rzq Iofx Ap Djkc Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg Gksdpjz N Np Nsfx Ap Djc - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: - Cutting length: max. 380 mm Godpfx Apezryu Ns Dekc

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Gksdez R Tr Sepfx Ap Doc Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!