Used Slitting And Cut To Length Line for sale (56,890)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Nedpfx Aaexrr S Hs Djwb Control software CNC MAXI 5 Premium Line is in full working condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: Nwodpfjx Sw S Iox Aa Dsb - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 Availability now from our stock in Hofkirchen/Austria

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW Nodpfx Asiyyc Eoa Dewb with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: used, Year of construction: 2000, functionality: fully functional, PPS DIETLE PPS-ASA-02 Automatic Cutting Machine (Year 2000) Used automatic cutting machine / profile cutting line PPS DIETLE, model PPS-ASA-02, year of manufacture 2000. The system is suitable for automated cutting to length of bar or profile material in series production. Nwsdex Srudepfx Aa Deb Scope of delivery: Machine as shown. Inspection under power possible by prior arrangement.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 300 584, overall weight: 8,000 kg, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), input current: 85 A, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder Nwjdjxrtwwepfx Aa Dsb - Pusher / compactor - Electrical control cabinet - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Nodpfx Aexdi Agsa Djwb

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Nwedex D Dq Sepfx Aa Djb Application Types Complete Production

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Nwjdpfx Aoxlcp Nsa Dsb Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland Nwsdpfx Aox Eb Abea Dsb

Year of construction: 2006, condition: excellent (used), Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Nwsdpfxok Twx Ho Aa Dsb Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg

Condition: excellent (used), Rema AP-500 Optimizing Saw Infeed material length: 500–6250 mm Blade diameter: 500 mm Nwjdpfsxt Ezkex Aa Dsb Motor power: 6 kW Pusher speed: 60 m/min Defect cutting: fluorescent chalk reader Margin trimming CE certificate DTR technical documentation Year of manufacture: 2018

Condition: good (used), Slitting line by manufacturer Schmitz. Maximum strip width up to 800 mm. Equipped with a trimming shear. A large number of tools are included. The line has already been dismantled and packed for transport. Technical documentation, electrical diagrams, etc. are available. Nodpfx Aajx Nph Aj Dowb

Condition: good (used), Year of construction: 1990, Rolled metal uncoiling, cutting and coiling line LTs. Line 1300mm/3mm. for precise cutting. For uncoiling, cutting metal, cutting into smaller rolls, coiling into small rolls. The line was bought new, owned by one owner, serviced on time by LTs representatives. The machine is connected and can be tested at any time in Vilnius, Lithuania. The LTs 1300/3 cutting line consists of: Uncoiling decoiler Multi-blade scissors Stop and cut-off segment Spinner with separator Trolley Wardrobe with control panel Technical specifications: Njdpspbwapefx Aa Djwb Metal width: 1250 mm. Thickness: 700 mm. Diameter min.: 508 mm. Diameter max.: 620 mm. Outer circle diameter: 1200 mm. Maximum weight: 7 T. Width of cut strips min.: 75 mm. Cut tape max. width: 1250 mm. Supply voltage: 3 x 380 V. Power: 18 kW. Made in: Poland Year: 1990 If you have more questions, welcome.

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm Nedpsm E U Hisfx Aa Dswb If you have more questions, we will be happy to answer them.

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: - straightening (rolls diameters 70 mm) - slitting (max 7 slitting knives) Njdpfx Aasiy N I Ij Djwb - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, HEGLA, ProLam 46 LTR-TD Combined Cutting Line for Laminated (VSG) and Float Glass Nedpfev I Ed Eex Aa Dowb Year: 2014 In very good technical condition. Inspection is possible by appointment. Available: NOW

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm Nsdolilgcjpfx Aa Djwb strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm Nwodslilfbspfx Aa Dsb No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Nsdpfetn Dijx Aa Djwb 20 - 300 x 0,4 - 3,5 mm

Condition: used, Year of construction: 2021, functionality: fully functional, Glass cutting line 3210x2550. 1. Loading with tilting feeder. Nedpfx Aasxz D R Hj Dswb 2. Cutting bridge, 3700mm long. 3. Base table with unloading. Table still in use. OPTIMA software. Can be viewed in Warsaw.

Condition: new, Year of construction: 2025, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 4 mm, coil weight: 20,000 kg, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting speed: 90 mm/min, product height (max.): 4 mm, working width: 1,600 mm, type of input current: three-phase, total width: 6,000 mm, total length: 28,000 mm, total height: 2,600 mm, feed roller diameter: 126 mm, operating speed: 60 mm/s, inner diameter: 508 mm, input voltage: 380 V, product width (max.): 1,600 mm, number of feed rollers: 2, number of straightening rollers: 17, power: 145 kW (197.14 HP), RAEDY IN STOCK ---> COIL SLITTING LINES Coil Slitting Line is a machine specially manufactured for slitting master coil in to baby coils. Coil Slitting Lines consist of the following equipment and units; Coil Car / Loading Trolley Decoiler / Uncoiler / Coil Unwinder Strip Transfer Unit Straightener / Leveler Strand Extensioner Leveler Slitting Head witg Slitting Knives Spare Slitting Head and Knives for Quick Change Scrap Recoilers / Winders First Strip Transfer Unit Strip Tension Control Separator Units and Parts Coil Rewinder System Coil Extraction and Easy Handling System Exit Car Hydraulic and Pneumatic Systems Electronic Control Panels Nsdpfx Aajh Dy Iye Dewb

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Nwsdpovtpciefx Aa Dob Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included Nwjdpfx Aaskt I Uys Deb - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Njdpfx Aaoxx Scfj Dswb Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case Nwjdpsu Iucuefx Aa Dsb - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system