Used Straight Edge for sale (6,655)

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for workpiece edge preparation before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot-melt adhesive granulate Workpiece height: 8 - 50 mm Fine-adjustable glue roller Guillotine shears up to 3 mm for pre-cutting roll material Pressure unit Cedpfx Aoxl Aw Toagori End trimming unit Multi-function milling unit for flush trimming, radius milling, and bevel milling Corner copying unit for head edges up to 2 mm, activatable from the control panel Radius scraper blade Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 Machine is OPERATIONAL and in GOOD CONDITION Ex works price NET €15,000.00

Condition: new, Year of construction: 2006, Band width: 150 mm Band length: 2250 mm Table size: 600 mm x 300 mm Veneer sanding device: no Oscillation: yes Tilting table: yes Extraction connection: 120 mm Motor power: 2.5 kW Machine length: 1200 mm Crsdpew H Ip Hsfx Aagei Machine width: 600 mm Weight: 200 kg

Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed infinitely variable from 18–24 m/min For edge material from rolls or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber coating Workpiece support – scissor-type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with two driven, angled rollers Processing units: Jointing cutter unit with 2 motors, each 3 kW Gluing unit A20 Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW Multi-stage finish sanding unit MN, automatic Finish sanding unit for glue joint Buffing unit above and below with oscillation Chip conveyor belt Cedpfx Aaew Sdlmsgori Electronic frequency inverters for processing units HOMATIC control system with NC21 input module Good condition of the machine.

Condition: excellent (used), Bargain from liquidation with feed and oscillation Credpfx Asxn Skzjagoi

Condition: used, Used FIB Industriele Bedrijuen BV approximately 11,600 litre stainless steel vertical storage tank. Unit welded dished top and bottom heads. Unit measures approximately 2,100mm diameter x 2,640mm straight side. Internal rated atmospheric design pressure at 135 deg.c. Unit is mounted on legs. Specifications: Codsxrb E Nepfx Aageri Capacity: 3,062 gal Diameter: 6.89' Height: 8.66' Type Of Heads: welded dished Vertical/Horizontal: Vertical Type of stainless: stainless steel Legs/Lugs: Legs Dimensions: Diameter 6.88976 feet and height 8.661415 feet

Condition: used, Year of construction: 2007, Jointing cutter 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Swappable tank Prepared for special feature: maximum workpiece thickness 60 mm (without jointing) Storage location: Supplier Codpfxoxnlace Aagjri

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Cjdjxlz Nzepfx Aagjri Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: as good as new (ex-display), Year of construction: 1993, Belt width: 150 mm Belt length: 3000 mm Table size: Veneer sanding device: yes Crjdpfjwv Nbvsx Aagei Oscillation: yes Tilting table: yes, 0°–45° Extraction connection: Motor power: 3 kW Machine length: 2000 mm Machine width: 1200 mm Weight: 600 kg

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Crsdpfxsxtpk Ae Aagsi Module max 8,5 Description Equipped with change gears books

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, AVAILABLE FROM APRIL 2026!! MACHINE IN OPERATION. TOTAL METERAGE AS OF 22/10/2025 – 426,050.00m Return conveyor for elements included in the price! E9001500 Edge Banding Machine, One-Sided "STREAM A" Model CE compliant E9001560 One-sided edge-closing unit, MODEL STREAM A / 6.0 E8000091 Narrow Element Infeed Device E8000086 NC OS Package – Set of devices enabling automation MACHINE CONFIGURATION Includes: - OS-2: 2 NC OSI units on infeed fence and first copying unit for pre-milling. - OS-1: 1 NC OSI unit on edge pressure rollers. E9901008 Pre-installation kit for return system E8000094 Flat air table at machine infeed E8000041 EDGE BAND TAPE POSITIONS – Automatic edge change, NC-controlled, standard NC axis for edge guide device. E8000048 Twin gluing system for use with both EVA glue and granular polyurethane (PUR) glue E8000101 QM-705 Unit for EVA hot-melt adhesives E8000051 Additional glue reservoir for machines with EVA glue capacity with PRE-MELT UNIT. For granular glue only E8000107 Nitrogen unit for PU glue. E4000286 Glue application head and glue tank CC10 preheating and maintenance station E8000038 Adjustable infrared lamp AdIRL-700 E8000314 Pre-milling unit FI-502 with diamond cutters H = 45mm included, Z = 2+2, 30° E8000032 ADZ-700 Anti-stick unit E4000232 Pair of diamond milling cutters H = 65 mm, Z = 3+3, 45° E8000225 IT90-S Saw Unit E8000109 Antistatic fluid applicator for finishing and contour rounding unit E8000405 RS-100 Upper and Lower Edge Milling Unit E8000415 PRO-NESTING KIT for Upper and Lower Edge Milling Unit E0001597 Pair of flat milling cutters with sliding engagement for upper and lower edge milling unit E8000508 RF400 Fine Milling Unit E8000527 "PRO-NESTING" kit for Fine Milling Unit E0001639 Pair of multifunction milling blades for fine milling unit, 25° milling – R = 1 / 1.5 / 2 mm E8000706 Edge Rounding Unit AR30 NC - 2 motors E8000744 Sliding fluid application unit before Edge Rounding Unit E8000718 Additional pair of motors for quick change of finishing milling heads E0001706 Pair of cutters with replaceable blades, R = 2mm – for edge rounding unit E0001708 Pair of cutters with replaceable blades, R = 1mm – for edge rounding unit E8000910 RB400 Edge Turning Unit E8000914 “PRO-NESTING” kit for Edge Turning Unit E0001915 Pair of multi-profile milling bits for edge scraper, 25° inclination – R = 1 / 1.5 / 2 mm E8001011 RCC-701 Glue Turning Unit Kit for sensitive panels for glue scraper unit E4000150 – Independent pneumatic shut-off of upper/lower unit. – Glue system for regulating scraper blade pressure. E8001035 SP-501 Cleaning Brush Unit E8000034 LPT-700 Cleaning liquid applicator for Brush Unit Crodpfoxqb Rcjx Aagei E8001000 PH-700 Hot air blower NSN19000 Parallelogram linear support, scissor type

Condition: good (used), functionality: fully functional, Control unit, top 1902 Edge feeder for strips & rolled material 1906 Glue application station (sensing nozzle) with cartridge reservoir Processing of EVA & PUR cartridges 1918 Pneumatically swiveling cutoff unit 0 - 12° Credpfx Ajxuiyajagei 1942 M Multifunction milling unit flush/chamfer/radius, pneumatic with motorized adjustment 1929 Radius scraper blade 1983 Contour milling unit 1964 Surface scraper blade 1940 Scraper unit

Condition: used, Year of construction: 2008, UNIVERSAL DOUBLE-SIDE SIZING & EDGE BANDING MACHINE FOR 1st AND 2nd PASS * Numerical Control / Software: SINITRA * Adjustable feeding speed (m/min): 10–40 (INVERTER C.N.) * Safety and sound-proof enclosures/cabins. * Working line (work units support tables), manual adjustment. * Distance (center-axes) of the disappearing dogs: 500 mm SIZING PART (for each side): * Anti-chipping Milling Unit AS 10 * N° 2 Hogging Units (1 Top + 1 Bottom) * Pre-Milling Unit EDGE-BANDING PART: * Glueing Unit: Hot Melt + Quick Melt Unit * Edge magazine with 6 positions * Snipping end-cutting unit * Rough Trimming unit * Fine Trimming unit 0 - 25° * Multi Function Unit - Profile contour Trimming unit with 4 Motors * Combined Milling grooving Unit: Horizontal + Vertical * Profile Scraping unit - Multi-profile, by N.C. 2 positions * Glue scraping unit * Buffing unit * Hot Air Heater to reactivate the color of plastic tape TECHNICAL DATA * Workpiece width: 240 – 1200 mm Crsdpexrc Hnsfx Aagji * Workpiece length: 240 – 2700 mm * Workpiece thickness: 10 – 60 mm * Edge thickness: 0,3 – 3 mm * Panel thickness: 10 – 60 mm * Edge height: 15 – 65 mm * Working table height: 950 mm WORKING UNITS * Anti-splint milling unit * Milling unit with pneumatic time entry AS10 * Double-hogging milling unit DT 10 * No. 2 anti-adhesive units * Edgebanding unit SP30 * Roller set to press the edge on straight profiles – 1 + 3 pressure rollers – motorized regulation of depth position automatically by numerical control * Edge magazine – 6 positions for SP10, SP20, SP30, SP40 * End cutting unit IT90-S * Milling unit RF10, straight tools * Multifunctional milling unit AR30 R=2 mm * Edge scraping unit RB10; R=2 mm * Glue scraping unit RC20 * Brushing unit SZ30 * Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim Crodpowkba Tjfx Aagei

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany) Cjdpfx Ashf Aclsagori

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: Credpfx Aaexn Tqvsgei • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale • Possibility to power up and inspect the machine on site.

Condition: new, Year of construction: 2025, functionality: fully functional, with integrated conveyor feed infinitely variable feed speed Credpfjxr Nxwsx Aagji top pressure rollers veneer edge sanding device oscillation tiltable up to 45°, motorized adjustment sanding unit motorized height adjustable by 120 mm mitre fence with scale optionally with auxiliary table, semicircular table, chassis, table extension

Condition: ready for operation (used), Chamfering machine FS500 Schallberger Technical data: 1200-8000 rpm, chamfer angle 45°, micrometer screw adjustable 0-5 mm, connection 230V, 50 Hz, weight 47 kg. Machine includes base cabinet and extraction unit. Csdpfx Aaoxtt H Uogjri

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Pre-milling cutters, Glue application by roller, Codsxq A Ebjpfx Aagjri Equipped with glue drain, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Power requirement: 7.4 kW, Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 98 h, machine/vehicle number: 17000-23051522412, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Epilog, laser hours: 97 h, laser power: 60 W, table length: 1,003 mm, table height: 673 mm, working length: 610 mm, working width: 305 mm, workpiece weight (max.): 63 kg, type of cooling: air, overall weight: 63 kg, total length: 1,003 mm, total width: 673 mm, total height: 455 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser engraver in excellent condition, supplied with a professional extraction unit and professional compressor. The system is totally complete and fully functional, virtually like-new (97 hours of operation). Business closed due to bereavement. Dimensions & Capabilities Working area (X × Y × Z): 610 × 305 mm Machine dimensions (L × W × H): approx. 1003 × 673 × 455 mm (39.5 × 26.5 × 17.9 in) Weight: approx. 63 kg (138 lbs) Laser Options Available type: CO₂ (metal/ceramic tube, air-cooled, 10.6 µm) with 60 W of power Speed & Precision Credpfxew Hg Nfe Aagji Max. speed: 120 IPS (≈3.05 m/s) with 5 G acceleration Resolution: adjustable from 75 to 1,200 dpi Software & Memory Software interface: Laser Dashboard™ and Epilog Job Manager™ Internal memory: up to 1 GB, allows for jobs of any file size Control Features & Mechanical Construction Operation modes: raster, vector, or optimized combined mode Motors: DC brushless servo motors with rotary encoders for precise positioning Guide structure: * X-axis: polished stainless steel bearings with Teflon coating * Belts: double-width Kevlar type B for high accuracy Camera & Display IRIS™ system: integrated overhead camera for visual job placement directly onto the laser table 7″ LED touchscreen on the machine for job selection and direct autofocus Connectivity & Power Supply Connections: USB, Ethernet and optional wireless (Wi-Fi), compatible with Windows 7/8/10/11 Electrical supply: auto-switching 100–240 V, single-phase 50/60 Hz; max amperage ≈13 A (or ≈6.5 A depending on region) Ventilation & Safety Extraction requirements: external venting or internal filtration unit, airflow of 350–400 CFM (≈595–680 m³/h), single 4″ (102 mm) exhaust *Safety standard: Class 2 laser product (≤1 mW, 600–700 nm)

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg Cjdpfx Aod R Ev Doagjri - free loading - Can be shipped for a fee

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Sanding belt oscillation Crjdpfx Aoxr Dfloagsi

Condition: excellent (used), Edgebander Brandt ambition 1210 pre-milling unit glue application pneumatic pre-cut guillotine pressure rollers trimming saws angled for final cut top and bottom milling unit R1 – R2 profile scraper flat scraper max workpiece height 50 mm Crsdpjxqxy Usfx Aagoi max edge thickness (in roll) 3 mm feed speed 10 m/min machine length 380 cm machine well maintained and in very good condition.

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device Credpfx Aslht Hwoagji F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers Crodpfx Aasvk R Arsgei 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Crodovr Hw Iepfx Aagoi Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -