Used Suction Tube for sale (4,260)

Condition: ready for operation (used), ERCOLINA TOPBENDER with 2-axis positioning system / 3 meters Codpjy T Namefx Abzorc -CE marking -Pipe capacity 60mm -Bending radius R10-R300 -Bending angle 0-180 degrees -Motor power 1.5 KW -Bending speed 1.25-1.5 revolutions/min -Includes 2-axis positioning system / 3 meters -2 sets of tooling with sliding shoe R100-1-1/4 & R67-25mm -Foot switch -Documentation Dimensions: L x W x H (base machine) 0.7 x 0.9 x 1.4 meters / Total weight 220 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2011, Lifting capacity: 1000 kg Unit with safety grille Crjdpfx Asy S S Nhsbzec Width: 5300 mm Height: 2900 mm Depth: 500 mm Net weight: 308 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2000, Lifting capacity: 220 kg Crsdpsy S Sbdsfx Abzsc Width: 650 mm Height: 1000 mm Depth: 300 mm Net weight: 30 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2015, Lifting capacity: 900 kg Unit with safety guard Width: 3150 mm Cjdpoy S R Icofx Abzsrc Height: 2000 mm Depth: 550 mm Net weight: approx. 200 kg Condition: good, second-hand

Year of construction: 1998, condition: good (used), Lifting capacity: 500 kg Crsdpfxjy Sypio Abzsc Width: 1950 mm Height: 1300 mm Depth: 350 mm Net weight: 79 kg Condition: good, second-hand

Year of construction: 1997, condition: good (used), Lifting capacity, horizontal: 500 kg Vertical: 360 kg Width: 900 mm Height: 1000 mm Depth: 900 mm Cedpfxey Sxxpj Abzjrc Net weight: 57 kg Condition: good, second-hand

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Codpfx Asd Ix I Aebzerc Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: good (used), – Hydraulic – Adjustable stroke – Foot pedal operation Crjdpfsy T D Hnjx Abzoc – Includes 5 dies: 2" / 1½" / 1¼" / 1/2" / 1/4" – 380V

Condition: used, Year of construction: 2020, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, Zenith 46kw dark radiator 12-15 meter black radiator ZENIT-46/L dark radiator 15m long for sale in mint condition. Csdpfx Ajudldfjbzerc complete unit with heat-reflecting shade, spacers, hangers, chimney if required make PAKOLE Zenit 46/L year of manufacture: 2020 heat output: 46kw pipe length: 12-15 meters p connection: 360mbar Connection voltage: Max. current consumption: IP21 AC 230V 50Hz

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor Crjdpfx Aswr Ul Ssbzjc motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer Cedpedwdrgsfx Abzorc -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Crsdpsy St H Ijfx Abzec

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Crjdpfx Absy N Rbwjzsc Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Crsdpfsrt Hurox Abzsc

Condition: ready for operation (used), Iseki Vitra 2030 sweeper-suction machine Cedpfx Aboipybpezsrc Machine is ready for use and is being sold due to discontinuation of operation.

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Credpey Sbc Rsfx Abzsc Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: NF-1706/2896, A Novotecnic candle filter system utilizing the precoating principle is available for the treatment and purification of grinding oil. Operating fluid: grinding oil, flow rate: 50 l/min, tank capacity: approx. 800 l, control: Siemens PLC. Documentation available. On-site inspection possible. The filter system was used in our facility to filter carbide from the coolant oil during tool grinding. Since the system is equipped with a drying unit, the carbide powder could be marketed effectively. Cjdpfxey Sw Rqo Abzsrc

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Crjdpehqmghefx Abzec Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: good (used), Year of construction: 2000, Lifting capacity: 350 kg Horizontal/vertical, swiveling Width: 1300 mm Height: 1250 mm Codpfx Aoy Rzc Uobzjrc Depth: 1150 mm Weight: 100 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2001, Lifting capacity: 500 kg horizontal/vertical, swiveling Width: 1200 mm Crjdpfxsy Ry Ucj Abzec Height: 1300 mm Depth: 1200 mm Weight: 120 kg Condition: good, second-hand

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Crsdpfx Ajg Dvdcebzec Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW Crsdpfottah Rjx Abzoc → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm Crjdpfx Abjx Ebzqszsc - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Cjdpfxsy Ryfno Abzorc Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: excellent (used), Year of construction: 2021, volume capacity 3000 m3/h feed volume 99.9 % length 3.000 Absaugschlauch mm compressed air 5.0 - 6.0 bar motor 230 Volt Codpfx Absy Erxcozsrc motor 1.5 KW weight 135 kg range L-W-H 655 x 655 x 1460 mm very rarely used according to the previous owner current new price approx. 4.500 euros special price on request Description : - KEMPER Filter-Master XL with 1x suction arm - IFA-tested - W3 approval = suitable for use with . welding of high-alloy metals - Cleaning takes place via compressed air - easy to move Technical data - Fan capacity: 3,000 m³/h - Extraction capacity (max.): 1,000 m³/h - Motor power: 1.5 kW - Supply voltage: 3 x 400 V / 50 Hz - Separation efficiency: > 99.9 % - Number of filter cartridges: 1 - Compressed air supply: 5 - 6 bar - Noise level: 69 dB (A) - Weight (without extraction arm): 135 kg - Dimensions (W x D x H): 655 x 655 x 1,460 mm Note : - Device is only used for extracting dry dust / smoke - Read the operating instructions before using the appliance for the first time. Read instructions