Used Tables for sale (16,073)

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: Hnodpfohikpljx Adwsg - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Hjdpex Ttbzsfx Adwsng Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Hjdox Tti Sspfx Adwsng Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, For sale: Imet 350 SHI-E band saw, as shown in the photos. This Italian-made machine can be tested on site to verify its functions. Loading is provided. Net price +23% VAT Cutting capacity: Angle 0° - round 305 mm - square 250 mm - rectangle 350x200 mm Angle 45° - round 250 mm - square 230 mm - rectangle 230x200 mm Angle 60° - round 175 mm - square 155 mm - rectangle 170x100 mm Table height: 940 mm Blade dimensions: 3370 x 27 x 0.9 mm Hnodpex Ur E Ijfx Adweg Blade speed: 37 - 74 m/min Motor power: 1.8 kW Arm lifting: hydraulic Arm lowering: stepless feed Vice: hydraulic Machine dimensions: 1500 x 1800 x 2000 mm Machine weight: approx. 700 kg

Condition: new, bending length: 2600sheet thickness: 6upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Hnsdpfx Asx Twiiedwjg - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Type: LG-1313/3kW HaiCut Premium Line - Maximum equipment level - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, or mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and aligned with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair facilities. A perfectly crafted cutting parameter library is included, as well as first-class on-site service. New machine, delivery time approx. 6-8 weeks We are happy to demonstrate the machine for you at our facility. Travel range: approx. 1300 x 1300 mm Table size: approx. 2500 x 1300 mm (i.e., the machine accommodates a medium-format sheet) Pull-out cutting table For high-precision metal cutting All systems fully installed and calibrated Cutting software in German Including nesting module Very easy to operate Switch on and start cutting Laser source by Max Photonics (G5/German specification) with 3000 watts of power Comprehensive electronic and mechanical collision protection for the cutting head Hnsdpfx Adoyacwkewsg Large laser safety window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting capacity: - Stainless steel up to 12mm - Steel up to 22mm - Aluminum up to 12mm - Brass up to 5mm Heavy-duty industrial quality Complete system / ready for immediate operation LED workspace lighting 200mm duct connection for fume extraction Including exhaust fan Leasing or hire-purchase available through our financing partner Need a different power rating or table size? No problem – we have numerous machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 2.5 tonnes

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg Hedoibq Nijpfx Adwsng

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm Hedpfsw Edigex Adwjng - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7829 TECHNICAL DATA - number of spindles: 20 pcs - max. tool diameter: 10 mm - adjustable spindle spacing: front/back, left/right - table surface size: 530x1300 mm - height to table surface: 950 mm - table working stroke: 100 mm - table height adjustment: pneumatic and manual - 3 pneumatic clamps - main motor: 3×2.2 kW - dimensions (L/W/H): 1700x1130x1600 mm Hedsxzh Nyjpfx Adwong - weight: 555 kg ADVANTAGES – Polish manufacture – adjustable spindle spacing: front/back, left/right – pneumatically lifted table – unpainted – used drill, very good condition Net price: 18,900 PLN Net price: 4,500 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit Hedpfxewgdh Se Adwsng - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm Hedpfx Aew I R Tiedwong - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES Hnjdpex Tpt Hsfx Adweg – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW Hnsdpfxoxg D Ayj Adweg I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, CATALOG NUMBER 7585 Technical specifications: - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm Hnedpfx Adex Tptgowjg - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: – Polish production – DTR documentation – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made Hnjdpfx Adoxa Egmoweg – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm Hjdpfsxdc Enjx Adwong - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: excellent (used), functionality: fully functional, Catalogue number 7668 TECHNICAL DATA - Track width: 250mm - Shaft width: 450mm Hjdex Tpqxepfx Adweng - Max saw blade diameter for multi-blade saw: 350mm - Max saw blade diameter for edger: 350mm - Saw blade bore diameter: 80mm - Max cutting height for multi-blade saw: 120mm - Max cutting height for edger: 100mm - Table width (with clearance): 900mm - Table length: 1770mm - From above: - Kickback pawls - Feed roller, pressing, metal, smooth - Kickback pawls - Pressing feed roller, slip type - Shaft with saws - Pressing feed roller, slip type, metal, 2 pcs - From below: - Guide rail - Kickback pawls - Crawler track - Central lubrication - Stepless feed speed adjustment - Feed motor: 1.1kW - Main motor: 22kW - Overall dimensions (L/W/H): 2200x1600x1800mm – Weight: 1900kg – German-made – Shaft with floating blade for edging – Used multi-blade saw, in very good condition Net price: 54,900 PLN Net price: 13,070 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: Hnodpfx Adsxvb Hzewog - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard Hnsdpfxowbdn Uo Adwsg - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7797 Hsdpfx Aext Ii Rjdwong TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours Hsdpfxjw Ipcve Adwong - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1993, Catalogue number: 7705 TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm Hedsw Edgfepfx Adwjng – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller - Feed via Kardana shafts - Stepless feed speed adjustment - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Weight: 205kg – German production – Unpainted – DTR documentation – Very good condition Hjdpox Tpmtefx Adwsng – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm Hnedpfxex Tplcs Adwsg - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation Hedpfsx Tphdex Adweng – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)