Used Tool Room Milling Machine for sale (67,032)

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 Gbsdjy H Ibcepfx Af Ajl >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gedpfsm Uygvjx Af Aobl DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Gjdpfoy R N I Ssx Af Asbl

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Gsdpsygctrefx Af Aobl Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2021, operating hours: 6,133 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, total height: 1,800 mm, total length: 2,435 mm, total width: 1,875 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 4,500 rpm, overall weight: 1,970 kg, table load: 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine with high precision, long service life, and maximum operator comfort. Multi-ribbed cast construction ensures full operational performance throughout the entire working area. Control System SIEMENS 840D SL Path Control Working Area X / Y / Z 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Infinitely variable speed range 0 - 4500 rpm Digital Feed Infinitely adjustable feed on all axes. Feed range 0 - 2000 mm/min, infinitely variable Rapid traverse 5 m/min Handwheel resolution 2.5 mm (X / Y / Z axis) Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill incl. manual clamp, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – Standard Additionally, milling head is movable along Y-axis by 150 mm. For horizontal machining, the milling head does NOT need to be removed—simply slide it into its rear rest position. Fixed Angle Table Clamping surface 820 x 420 mm T-slots: 1 / 14 H7 reference slot 5 / 14 H12, 63 mm spacing Table load capacity: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable on all axes Main spindle motor with spindle speed brake function Oriented spindle stop; vertical and horizontal spindle for tapping cycles without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated scale rings on all axes Precision ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Control cabinet compactly integrated into machine Splash guard cabin with optimal, user-friendly access Safety glass window at the rear of the cabin Open at top—front and right doors, including sliding door at the front with safety interlock Interlocked when unpowered; additional service opening on left cabin side—bolted, removable Freestanding mobile coolant tank, 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel lamella cover for Z-axis guide protection Halogen machine lamp, 24V Easy-to-operate milling guard with plexiglass pane Operator's manual, spare parts list, and electrical diagram in paper form Set of machine feet Transport bar and retaining rings for 2-strand lifting tackle Color: light gray RAL 7035 and telegray RAL 7045, fine texture Space Requirement – Connection Values Machine weight approx. 1970 kg Footprint (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. fuse protection: 35 A NH Gbedpey R Tctofx Af Ajl Network type: TN-S Connection type: fixed connection Further information available in the PDF attachment. The machine is supplied without tools and without accessories.

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Gsdpfx Aey R Ebzsf Ajbl Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Gbodpfjy Rxvlsx Af Ael

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication Gbjdpsy D Tl Iofx Af Ael About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Gbsdpfxsy Egcco Af Ajl Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 150 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, feed rate X-axis: 500 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 500 m/min, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, table length: 600 mm, table width: 210 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 800 kg, table load: 200 kg, space requirement width: 1,600 mm, space requirement length: 1,400 mm, space requirement height: 1,750 mm, Equipment: CE marking, documentation/manual, The machine was overhauled/partially overhauled by our workshop in 2026 and, in the same process, retrofitted for CE conformity. The machine is in excellent condition. Complete machine in CE standard version. A CE declaration of conformity has been issued for the machine, with FPS Werkzeugmaschinen GmbH assuming responsibility as the manufacturer. As a result, the machine meets the requirements of the German Industrial Safety Regulation (Betriebssicherheitsverordnung – BetrSichV). The year of manufacture therefore corresponds to the date of the CE retrofit. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 - New CE switch cabinet (in accordance with current regulations of professional associations) - Safety brake motor: the milling spindle comes to an immediate stop upon reaching zero speed. Control 3-axis – Active – Digital display Spindle speed 40-2000 rpm, geometrically stepped direct-drive gearbox with 18 speed stages for maximum torque and milling performance Feed rate 5 to 500 mm/min, steplessly adjustable Rapid traverse 1.2 m/min Quill Extendable quill, vertical 80 mm, SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600 x 210 mm Maximum table load: 200 kg Equipment • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine light • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • and more. Godpfx Ajy I Trpjf Aobl

Condition: ready for operation (used), Year of construction: 2003, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 565 mm, rotational speed (max.): 1,500 rpm, machine completely rebuilt in 2003 ACURITE 3-axis digital readout automatic lubrication spindle taper SA 40, maximum speed 1500 rpm Gbedpfx Ajy Sbflef Aol travel: 900 x 450 x 565 mm weight: 3000 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Gedpfewid Spox Af Ajbl Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Gbsdpjy Awz Rofx Af Asl Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Gsdpfxsy R S Uno Af Ajbl Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Gsdey R Srgspfx Af Asbl Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off Gsdpfx Asy R Skcsf Asbl X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), DECKEL FP 2 Tool Milling Machine from Educational Facility Gbjdpfx Afox Hyuho Ael - Well-maintained original condition - Travel paths X/Y/Z 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40 - 2000 rpm - Automatic feeds/rapid traverse on all three axes - Tool holder ISO 40 - Vertical/horizontal milling attachment - Vertical head swivels and features a quill for drilling - Coolant system - X-AXIS leadscrew nut "NEW" - Machine feet - Various tool holders - Chip guard - Machine base - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Gbedpfx Aoy Ni Ivef Aol Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, input voltage: 380 V, We offer this used Deckel Contour 3 tool milling machine, year of manufacture 1987. Control system: 6004 50 009302 00 Serial number: 20031 Year of manufacture: 1987 Wiring diagram: 6003 90 077302 00 Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 23 A Control voltage: 24 V Maximum fuse: 35 A The machine is equipped with a rotary table and a tool changer. If you have any questions or need further information, please feel free to send us a message or call us. Godpfoy Hfc Rex Af Asbl

Condition: used, Universal Tool Milling Machine MAHO Type MH 600 P Machine No. 61742 Year of manufacture: approx. 1982 Travel (X) table cross movement: 500 mm Travel (Z) head movement: 400 mm Gjdpsyy Df Dsfx Af Aobl Travel (Y) vertical movement: 370 mm Table size: 720 x 410 mm Spindle taper: SK 40 Spindle speed: 40 - 2000 rpm, 18 steps Feeds X, Y and Z: 5 - 500 mm/min, stepless Rapid traverse X and Z: 1.2 m/min Rapid traverse Y: 0.8 m/min Quill travel horizontal: 80 mm Quill travel at vertical head: 80 mm Distance spindle nose to table: max. 370 mm Spindle drive motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Digital display with HEIDENHAIN TNC 131 positioning control - Vertical milling head swivels +/- 90° - Hydromechanical tool clamping - Universal swivel-tilt rotary table - Hydromechanical clamping for table rotary motion - Table rotation with direct and indirect indexing and indexing disc feature (hand crank with locking pin missing) - Table rotation worm gear ratio 1:120 - Automatic central lubrication - Control cabinet fixed to machine - Coolant system integrated in machine base - Machine lamp - Operating manual and circuit diagram Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1650 kg Very good condition

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gbsdpjyzfn Ajfx Af Ael Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Godjupiypepfx Af Aobl Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Spindle mount vertical + horizontal: SK 40 Quill adjustment: approx. 80 mm Table clamping surface: 800 x 340 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 500 mm Gjdpfein Dktsx Af Ajbl Speed range: 35 – 1550 rpm Table adjustment: Feeds: 6 – 270 mm/min Rapid traverse: X + Y Drive power: approx. 3 kW Machine dimensions (L x W x H): 1350 x 1300 x 1880 mm Weight: approx. 1750 kg Accessories / Special features: • As-new 3-axis digital readout SINO • Swiveling vertical milling head R + L, quill adjustment • Horizontal milling spindle • Feed on all axes • Rapid traverse X + Y • Coolant system • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, operating hours: 7,576 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 255 mm, table length: 885 mm, table width: 320 mm, overall weight: 2,500 kg, table load: 250 kg, Fehlmann Picomax 55 CNC 2/3 Milling Machine The machine is fully functional and in very good technical condition. We purchased it a year ago from a company that owned it from new and always serviced it at the official Fehlmann service center. We are selling it solely because we do not have enough SF32 tool holders. Control: Heidenhain 530. The machine is equipped with a measuring probe. Axis travels: X: 500 mm Y: 255 mm Z (manual quill): 160 mm Z (programmable quill): 147 mm W axis: 500 mm Table surface: 885 x 320 mm Spindle speed range: 50 – 9,000 rpm Tool holder: SF32 Table load: max. 250 kg Gbedpfx Aoyzt Abef Ajl Spindle power (S6, 40%): 9.9 kW Machine weight: approx. 2,500 kg Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm The machine is in very good condition and the spindle has less than 10,000 operating hours.

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Universal Tool Milling Machine DECKEL FP 4 MK With 3-axis active digital readout Heidenhain TNC 113 Year of manufacture: 1990 Travel range: X 500 Y 400 Z 400 mm Speed range: 50 – 2500 rpm Gedpfjyycagsx Af Aobl Including the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer Hydraulic tool clamping GRESSEL hydraulic vise 125 mm Various SK 40 milling arbors Splash guard enclosure Automatic central lubrication pump for X, Y, Z axes Machine lamp Coolant device 4 machine feet Operating manual