Used Toolholder for sale (273)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Hsdpew T Tcwsfx Aameh Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Hedpex T Ddyofx Aamsh Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16 Technical Specifications Year of manufacture: 2006 Maximum machining diameter: ø16 mm Maximum machining length: 200 mm per chucking Maximum diameter for frontal drilling: ø6 mm Maximum diameter for frontal threading: M6 Main spindle bore diameter: ø16 mm Main spindle speed: 200 to 10,000 min⁻¹ Main spindle C-axis: 0.001° Maximum clamping diameter sub-spindle: ø16 mm Maximum back-working length: 125 mm Maximum part overhang sub-spindle: 25 mm Maximum drilling diameter back-working: ø5 mm Maximum threading diameter back side: M5 Sub-spindle speed: 200 to 10,000 min⁻¹ Toolholder group: max. drilling diameter ø5 mm / max. thread cutting diameter M4 Spindle speed: 200 to 8,000 min⁻¹ Turret: max. drilling diameter ø5 mm / max. threading diameter M5 / spindle speed: 200 to 6,500 min⁻¹ Number of mountable tools: up to 21+α Axis rapid traverse speeds: 20 m/min Minimum programmable increment: 0.001 mm Axis travels: X1: 60.5 mm / Y1: 208 mm / Z1: 205 mm / X2: 107.5 mm / Z2: 133 mm / X3: 195 mm / Z3: 280 mm Main spindle motor power: 2.2 kW Sub-spindle motor power: 0.75 kW Driven tool spindle: 0.75 kW Hsdpfjx Emnrex Aamoh The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision components. With a machining diameter up to ø16 mm, machining lengths up to 200 mm, and high spindle speeds up to 10,000 min⁻¹, this machine is ideal for complex machining tasks. The integrated C-axis on both main and sub-spindle enables precise positioning, as well as sophisticated milling and drilling operations. The machine offers extensive tool capacity with up to 21 tools and multiple driven tool stations, allowing even complex processes to be completed in a single setup. Generous axis travels and precise feed increments of 0.001 mm ensure the highest manufacturing quality with minimal tolerances. The delivery includes an LNS Express-220 bar feeder from 2011, providing automated material feed to significantly increase productivity and process reliability. Various toolholders are also included in the package. The machine is robustly built and designed for continuous industrial operation – ideal for the production of watch, medical, electronics, or automotive components. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: excellent (used), Year of construction: 2008, Miyano BX-26S CNC Lathe TECHNICAL DATA Clamping Units Hjdpox Emmhofx Aameh Collet machine with main and sub-spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 mm Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. threading diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool Slides Tool slide: Vertical linear slide Number of tool stations: 16 Number of tool stations Slide 1: 6/4 Tool shank size: 16.00 mm Inner toolholder diameter: Ø 20.00 mm Travel range X1-axis: 135.00 mm Travel range Y1-axis: 260.00 mm Number of turning tools (L spindle) X-/Y-axis: 2/2 (Use for L/R spindle) Z-axis unit: 2+2 Speed range: 100 ~ 4,000 rpm Drive motor for driven tools: 0.5 kW / 0.5 kW Max. drill diameter for driven tools: 8.00 mm Max. drill diameter with driven tool motor: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7 Number of tool stations Slide 2: 3/4 Tool shank size: 16.00 mm Inner toolholder diameter: Ø 20.00 mm Travel range Y2-axis: 215.00 mm Machine Dimensions Machine height: 1,670.00 mm Floor space (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets Hodpfx Aasxltzvsmsh  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Hedpfxetq Nlcs Aameh Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: used, Year of construction: 2016, Technical details: x-travel: 1000 mm y-travel: 610 mm z-travel: 600 mm table-size: 1150 x 600 mm table load capacity: 1000 kg Hodpjw Hg Syofx Aamoh rapid traverse X- and Y-axis: 24 m/min rapid traverse Z-axis: 24 m/min spindle taper:: SK 40 spindle turning speed range: 10.000 1/min spindle drive: 15/22,5 kW tool change unit: 30 Pos. CNC-control: SIEMENS 828D operate shopmill distance spindle nose and table: 110 / 710 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 3,2 x 2,2 x 2,7 m vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on" *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 3100ULY (2012) CNC LATHE WITH ROTARY TOOLS AND “Y” AXIS – “Z” TRAVEL: 3,000 mm SPECIFICATIONS: - FANUC i Series CNC, 10.4” LCD Color Manual Guide Hedpfx Aex Sqkwoamsh - Swing over bed: 850 mm - Swing over saddle: 670 mm - Maximum turning diameter: 420 mm - Maximum turning length: 3,125 mm - Axis travel: X 210 mm, Y ±60 mm, Z 3,125 mm - Chuck size: 400 mm (*) - Bar capacity: 102 mm - Spindle nose: ASA A2#11 - Main spindle: 2,800 rpm, 22 kW - Turret: 12 stations (indexing time per position: 0.25 sec) - Rotary tool motor: 7.5 kW, 5,000 rpm - C-axis indexing: 0.001 mm - Tailstock travel: 3,135 mm INCLUDED EQUIPMENT: - Samchully MH-212 315 mm hydraulic chuck - C axis: 360° (0.001° increments) - Automatic tool setter - Built-in tailstock - Programmable tailstock - High-pressure pump - Chip conveyor - Mechanical, hydraulic, and electrical preparation for automatic steady rest - SMW AUTOBLOK SLU-X-4-ZS hydraulic steady rest - Complete standard toolholder set for internal and external machining, including 4 rotary holders (2 straight, 2 angular) - Set of manuals (Doosan and Fanuc) (All specifications to be confirmed) CONDITION: Under power, in excellent condition. Ready for inspection. Immediate delivery.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Model Series Oi-TD Hsdjx D Iq Aspfx Aameh Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Machine weight 13500 kg Hedpfex D R I Rex Aameh Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1997, SIGMA MISSION 1 Machining Center FANUC O – M CNC Fully functional and in excellent condition Connected and ready for operation Table size: 750 mm x 400 mm T-slots – number, width, pitch: 3 x 18 x 125 mm Travel: X: 600 mm Y: 400 mm Z: 450 mm Spindle taper: ISO 40 Hjdpfx Aasxcgyysmoh Spindle speed: 6,000 rpm Tool magazine: 16 positions Supplied with various toolholders/tools Includes 2 machine vises Weight: 4,500 kg Year: 1997, complete with full documentation

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder Hsdpfx Ajxyh Ndoamjh >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Hedpfoxx U Svex Aameh

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hodpfjxx U Ecjx Aameh

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1022.3421-03, With Siemens Sinumerik CNC control 805, electronic handwheels, 3-jaw chuck, faceplate, 4-jaw chuck, Multifix toolholder, CAPTO toolholder, various additional accessories, separate control cabinet, operating manuals, weight approx. 4 t, used in single-shift operation. Hedpfx Aaox Iv R Ismoh

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty Hsdpfx Aaexv A I Tjmjh The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 750 mm, Hartford Pro 1000 – Vertical Machining Center (2006) For sale: A well-maintained Hartford Pro 1000 vertical machining center from 2006. The machine has seen only light production use and has been serviced on a regular basis. Ideal for precision machining, prototyping, and small to medium batch production. Technical Specifications Year of manufacture: 2006 X-axis travel: 1,000 mm Y-axis travel: 600 mm Hpebsx Dx Hnomt Dty Aea Z-axis travel: 630 mm Hedpfxjx Dx Hns Aameh Table size: 1,200 × 600 mm Spindle speed: 8,000 rpm (BT40 taper) Tool changer: 24 stations CNC control: FANUC HARTROL AI300 Spindle motor power: approx. 11–15 kW Machine weight: approx. 6,000–6,500 kg Cooling system: Flood coolant, through-spindle coolant, coolant tank with pump Condition • All axes move smoothly without abnormal noise • Spindle operates properly with no overheating • Control electronics are fully functional • Regular maintenance performed; filters changed routinely • Machine available for trial machining Included Equipment • Optional BT40 toolholders (subject to separate agreement) • Chip conveyor • Coolant tank with pump • Work lights, full guarding, documentation/manuals Availability & Logistics The machine is available for immediate delivery and is ready for loading. Transport, loading, installation, and commissioning can be arranged within Finland or internationally. The listing was translated automatically. Translation errors are possible.

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Hodpfx Aex D Il Hjamsh Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Internal item number: 25092 Hodpfxsxvazkj Aamsh Driven toolholder Adjustable angle head Manufacturer: Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18 lathe.

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Hedpfxoxv Av Rs Aamjh Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm Hsdpjw Idllefx Aamsh >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Hedpfx Aasu U E Avsmsh Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Hedjxz Edzepfx Aamoh

Condition: ready for operation (used), controller manufacturer: AZ-102 - Windows, total height: 3,315 mm, total length: 5,055 mm, total width: 3,745 mm, empty load weight: 8,500 kg, Bewerkingscentrum dat vroeger werd gebruikt voor het vervaardigen van bandenmallen. Gereedschapswisselaar met 24 posities 5 assen tegelijk! Hsdpfx Aaoxuwx Remsh Max longitudinal travel X-axe: 1100 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 500 mm Max height workpiece: 580 mm Power on spindle: 2.2 kW Admission in boring head (ISO): F12 Spindlespeeds: 3 - 40 000 rpm Table size: 1700 x 600 mm Table turning angle: 360° Digital screen: ja ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 24 positions

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 Hedpfx Aastzgaqsmsh DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2