Used Toolholder for sale (274)

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Rbsdjxbzqqepfx Adbst Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Rbodpfx Aexndgzodbet Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: excellent (used), functionality: fully functional, Schaublin lathe type 125B in very neat condition. Specifications: - Swing over bed: 270mm - Distance between centers: 500mm - Spindle speed: 40–3000 rpm Accessories: - Heidenhain digital readout ND780 on 2 axes Rsdox Auv Ajpfx Adbobt - Multifix toolholder with 6 holders - 3-jaw self-centering chuck with inside and outside jaws - Set of change gears - 2 x drill chuck - Live center - Machine feet - Drive flange - Set of collets with drawbar - Machine lighting

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Rbodpfx Adjudh Slobst Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Condition: used, Year of construction: 2002, Gildemeister cnc lathe CTX 400 S2 V3 CNC pilot control 4290 Heidenhain year 2002 C axis driven tools Rbodpou Aahrsfx Adbjt tool head 12 tools Sauter VDI30 spindle passage 66mm Turning diameter max. 420 mm Turning length max. 630 mm Konik with machine chip conveyor documentation 2 driven toolholders 1/1

Condition: good (used), Year of construction: 2000, Morgan Rushworth NC Downstroking Pressbrake – Year 2000 Rjdpfxoxau Els Adbebt 120 tonnes x 4000 mm. NC Backguage. Safety Guards. Top and Bottom Tooling and Toolholders.

Condition: new, neu Bulgarien 77840 € 1471. € 760 mm 3000 mm 380 mm 132 mm 520 mm Redpfowiq Rrex Adbjbt 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 63 970,00 turning length2.000 mm € 66 880,00 turning length4.000 mm € 83 740,00 turning length5.000 mm € 96 300,00 turning length6.000 mm € 109 900,00

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) Rbsdpfx Aewiqz Dsdbot 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 44 720,00 turning length 1.500 mm € 45 600,00 turning length 3.000 mm € 51 840,00 turning length 4.000 mm € 57 2,00 turning length 5.000 mm € 72 200,00

Condition: used, Year of construction: 1986, operating hours: 10,839 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 1,000 kg, total height: 2,945 mm, total length: 4,013 mm, total width: 3,790 mm, table width: 510 mm, table length: 1,300 mm, table load: 1,000 kg, rotational speed (min.): 30 rpm, overall weight: 8,200 kg, spindle speed (min.): 4,000 rpm, number of slots in tool magazine: 20, tool length: 400 mm, tool diameter: 230 mm, tool weight: 15,000 g, Equipment: rotational speed infinitely variable, For sale production cell 2 OKUMA CNC milling machines with automatic tool changing. . Machines have full documentation. Machines were used for making spare parts for CNC machines. Highly rigid machines with spindles with mechanical gear ratio the machine itself selects the gear depending on the selected speed (4 gears). The larger MC-5VA machine has IGF dialog programming (full documentation) also has M-codes for the user - in our case they were used to work with indexed 4th and 5th axes. Machines operating used with a large number of tools Comes with a well-equipped Lista brand tool cabinet, a BT50 toolholder cart and a sturdy workbench with drawers. Includes 2 BIG-Kaiser mulliplicators. 4 BIG-Kaiser boring bars with cooling through the tool. Quite a few milling heads including large ones over fi 200. A large set of branded EPB toolholders. Spare bearings for the main spindle. Rbodpfx Aju Atn Sedbot Lots of spare parts.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Rjdpjx D U Arofx Adbobt For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rbodpfx Asxflprjdbjt Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Rbodpfjwwl Saex Adbet Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up Rsdpfxjtw U E Ue Adbebt - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841

Condition: used, Year of construction: 2008, DAEWOO DOOSAN PUMA 400 M LATHE YEAR OF INITIAL INSTALLATION 2008 AUTOBLOK SELF-CENTERING STEADY REST CNC Model: Fanuc CNC Version: 21i-TB Main spindle power: 30 / 37 kW Main spindle chuck diameter: 315 mm Main spindle bar capacity: 95 mm Swing over bed: 770 mm Swing over carriage: 590 mm Turning diameter over bed: 560 mm Turning length: 1105 mm Main spindle speed: 20 – 2,500 RPM Number of tool turrets: 1 Number of tool stations on first turret: 12 Number of driven tool positions on first turret: 12 X-axis travel (first turret): 362 mm Z-axis travel (first turret): 1105 mm Tailstock: Yes Chip conveyor: Belt type Tool presetter: Yes Rbedpfxexxur Ae Adbst Number of driven toolholders supplied: 5 (3 axial + 2 radial) Machine in excellent condition.

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard Rjdpfjw S E Ddox Adbjbt - Pull-out chip tray - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: like new (used), Year of construction: 2022, Controller HAAS (LCD screen, 1 Gb memory, touch screen, WIFI) Table size D400 mm Table load 227 kg No of T slots 5 X travel 610 mm Y travel 406 mm Z travel 406 mm B axis tilting +120 / - 35 degree C axis rotation 0 - 360 degree Distance between the spindle and table surface 102 - 508 mm Spindle speed 15000 rpm Spindle power 22,4 kW ATC magazin 50+1-fold Toolholder HSK-A63 Rapid speed X/Y/Z 30,5 m/min Feedrate 16,5 m/min Weight 5400 kgs Machine dimensionen LxWxH 2900 x 2280 x 2520 mm Features, accessories Rbsdolaxu Depfx Adbet - CTS 69 bar - Coolant unit - Extra filter system on coolant unit - Dinamical zero point shift / toolpoint programming - Intelligent over voltage protection - Ethernet interface - HAAS Connect, remote control - HAAS Drop (Wifi Data transfer) - High Speed machining - Media show during working by M130 - Rigid tapping - Protection from over voltage - Chip conveyor - Programmable coolant nozzles - Air through the spindle Two idencital machines are for sale. Ready to buy immediately.

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Rsdpjxadmrsfx Adbsbt Toolchanger: yes Number of toolholders: 30 positions

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad Redpfx Adowa Uf Uobebt weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door Redpfx Adsww Nazjbebt - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Year of construction: 2011, condition: used, 32 mm direkt Rbedpowa Ugljfx Adbst 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1. 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti 2. more than 20 steady tool holders for turning and boring tools by ALGRA 3. 4 bolted tool holders by SAUTER/ALGRA Rbedsvy Iqxspfx Adbot 4. a mechanically operated bar puller toolholder by KINTEK 5. a live center 6. balanced pressure clamping (able to grip thin walled parts) 7. sets plastic drawtubes for bar working in different diametrers 8. more than 50 sets of soft machined jaws 9. 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW 10. SMW special ring for soft jaw turning/machining

Condition: new, Year of construction: 2022, operating hours: 173 h, functionality: fully functional, machine/vehicle number: TJPM1003, turning length: 640 mm, turning diameter over cross slide: 215 mm, turning diameter: 215 mm, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 51 mm, Equipment: documentation/manual, rotational speed infinitely variable, Japanese Takisawa TM-2000 Y2 turning center with two turret, and Y axis (both), sub spindle and Fanuc 0iTF Plus controller. Demo machine with 173 h running time. Options: Kitagawa BB206 3 jaw chuck for main spindle Kitagawa B206 3 jaw chuck for sub spindle SMW (Mario Pinto) PPBE-42 collet chuck for main spindle SMW (Mario Pinto) collet chuck for sub spindle Raku-Raku monitor controller option Abnormal load detection function 9 bar high pressure coolant Bar feeder interface Remaining bar discharge device Rjdsxn Sapjpfx Adbsbt Tool setter (manual) Workpiece unloader with conveyor Chip conveyor Static toolholders 2 pcs axial rotary toolholder

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Rbjdpexzqq Tefx Adbot Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: excellent (used), Year of construction: 2006, operating hours: 6,650 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized, slant-bed numerically controlled lathe equipped with a tailstock, C-axis spindle, and a 12-position powered turret with VDI 40 tooling interface. The configuration also includes a tool presetter, chip conveyor, programmable tailstock body, hydraulic 3-jaw chuck 250mm BB, and fixed toolholders. Rbodpfjxdvarox Adbot Main features: Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar diameter: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Year of manufacture: 2006, with only 6,650 spindle hours, CE compliant machine.

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm Rbjdpfxjwizlto Adbjt spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp