Used Toothed Belts for sale (9,969)

Condition: excellent (used), CATALOG NO. 7728 TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg Nkodsya Hmvopfx Adwot ADVANTAGES – Unpainted – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Njdpfxsx Ifgro Adwjkt Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller Nsdpfox Dbh Isx Adwekt - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Nkjdsyaq Rfspfx Adwjt Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Njdpfoxzi S Nox Adwskt Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: new, Introducing the DSB T 200, a high-performance Belt/Disk Sander from KNUTH, uniquely designed to meet the needs of both professionals and DIY enthusiasts. This machine boasts a variable speed adjustment feature that allows you to finely tune the grinding disc speed from 900 to 3,600 rpm in 100 rpm increments, ensuring optimal control for precision sanding. Its robust motor, housed in a sturdy cast iron body, not only provides reliable power but also contributes to low heat generation and a long service life. The DSB T 200 is equipped with high-quality corrundum grinding discs, adjustable workpiece supports, and a digital display that shows the current speed clearly. Safety is prioritized with protective shields and a design that permits connection to a dust extraction system. Perfect for any workshop, the DSB T 200 combines powerful performance with user-friendly features. To enhance your grinding experience, make sure to order now and elevate your grinding tasks with this versatile Belt/Disk Sander. Njdpfxeydmh Uj Adwjkt

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm Nodpjxcbppjfx Adwekt - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: excellent (used), Levigaltecnica Mikro SR/RTC/1100 Wide Belt Sander Nodox Tqdtopfx Adwskt Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with sanding pad Optical oscillation Electric height adjustment Abrasive belt dimensions: 2150×1170 mm Two feed speeds

Condition: excellent (used), SCM Sandya Uno RCS Wide Belt Sander Nsdpfx Adsx Tpk Sswskt Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with steel roller Combi unit with pad Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Weight approx.: 1050 kg

Condition: good (used), Code: 0217 Brand: SAMCO Njdpjxivycsfx Adwskt Model: F 3000 Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 Nksdpfx Ajv A Ta Dodwjt 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm Nkodpfxoydi A Ij Adwet -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow Nodpfx Adjydnigswjkt • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA Nkedpfx Adsx U Urqswot - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA Nkjdpfx Adex U Tnqewjt - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, If required, a Weinig Variomat can also be purchased (see video). General Information Manufacturer: Stähle-Hess (DE) Year of manufacture: 2013 CE marking present Nodpfsydd Thex Adwekt Workpiece Dimensions Height: 7–150 mm Width: 10–200 mm Minimum length: 300 mm Max. sanding height: 200 mm Sanding Technology Belt speed: 18–30 m/s (variable) Sanding belt: 220 × 1,800 mm Feed 8–16 m/min (variable) Extraction 2 connections Ø 120 mm Air requirement: approx. 2,350 m³/h Negative pressure: approx. 1,500 Pa Pneumatics Operating pressure: 6–8 bar Dimensions & Weight Size (L×W×H): 1,880 × 1,450 × 2,100 mm Weight: approx. 2,500 kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Njdjxy Nrgspfx Adwskt Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: used, SCM Sandya 600 RCS 110 Wide-Belt Calibrating and Fine Sanding Machine Njdpfjx Uyfcox Adwjkt The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibrating sanding unit with RA angled-grooved steel contact roller 2. Combination sanding unit with contact roller, 140 mm diameter, 85 Shore hardness, elastic MESAR sectional sanding pad with sector-wise electronic control Working width 1100 mm Main motor power 15 kW Version "B" for RCS MESAR elastic sectional sanding pad electronic programming unit "LOGIC SC screen control" electrically adjustable working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from a small workshop / LEASE REPOSSESSION First delivery 2017 available from stock Lieboch

Condition: good (used), Year of construction: 1988, Working width 1.100 mm Number of sanding units 1 st. Workpiece thickness max. 150 mm sanding belt measurements 1.120 x 1.900 mm Motor roller 15 kW kW Nsdpfx Adjxzuwqowskt Feed speed 2,5 - 12,5 m/min.

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Nodpfx Aovvki Nedwokt

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Nkjdpevvkkaofx Adwst Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg Nkodpexnynuofx Adwjt ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 working units: 1) Grooved rubber calibration roller 2) Grooved rubber roller + pneumatic segmented pad + steel roller - Motor power: 15 kW Nodpfx Asx Hhy Sjdwjkt - Brake - From above: - Split, non-slip rubber feed roller - Working unit - Split, non-slip rubber feed roller - Working unit with segmented pad - Split, non-slip, outfeed rubber roller - Cleaning brush - From below: - 2 non-slip steel rollers - Feed belt - 2 non-slip, outfeed steel rollers - Pneumatic belt oscillation controlled by photocell - Electric table height adjustment - 2 feed speeds - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Working pressure: 8–10 bar - Dust extraction port diameter: 3 x 165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1,502 kg ADVANTAGES – Italian production, SCM brand – 2 working units – Sanding thickness potentiometer – Pneumatic segmented pad – Original paint (not repainted) – Technical documentation (DTR) – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg ADVANTAGES - German made - Original paint Nkedpev Ubmijfx Adwot - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)

Condition: excellent (used), Wide belt sander SCM Sandya 10 RCS Working width: 1100 mm Working height: 3-160 mm Nksdpfxjx Svxyo Adwst Number of sanding units: 2 1. Calibration roller 2. Combi unit with pad CE certificate Sample photo of the machine