Used Turn Mill Center for sale (20,971)

Condition: excellent (used), Year of construction: 1997, operating hours: 65,543 h, functionality: fully functional, machine/vehicle number: 501637, rotational speed (max.): 4,500 rpm, bar diameter (max.): 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar loader: Irco RBK 7212, built in 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool carrier Number of tools: 8 Shank diameter according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool carrier 1 speed: max. 4,000 rpm Tool carrier 2 speed: max. 4,000 rpm Slide 1 Transverse travel / Longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X: 15 × 25 mm Thread spindle pitch Z: 15 × 32 mm Slide 2 Transverse travel / Longitudinal travel: 82 / 120 mm Ijdpfowkp Ifjx Ab Iea Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions including bar feeder and chip conveyor (LWH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Holder for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - Including 2 tool holders

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Iedov Hqntepfx Ab Ioa Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, counter spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Machining Area Maximum turning diameter: 380 mm Bar capacity: 77 mm X-axis travel: 230 mm Z-axis travel: 575 mm Ijdpfxow Imxus Ab Ioa Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 6,000 rpm Sub spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-position turret with driven tools Interface for bar feeder magazine Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction unit High-pressure cooling: 5 bar Chip conveyor

Condition: good (used), Year of construction: 1999, operating hours: 1,40,810 h, functionality: fully functional, Gildemeister MF SPRINT 65 Iodpfeu Dg Ubex Ab Isa Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar feeder Annual maintenance by DMG, last service on 08.07.2024: - Linear guides, axial bearings, ballscrews and locking nuts renewed on X1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on X2 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z2 axis - All telescopic cover wipers replaced - Safety glass in work area door replaced - All feed timing belts as well as the counter spindle drive timing belt replaced - Tool drive 1 dismantled, disassembled, cleaned, and newly fitted with bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 replaced - Main spindle and counter spindle chucks dismantled and cleaned - Machine geometry and work area remeasured and adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced - Technical data see attachment Machine can be inspected under power. Price: €25,000 negotiable The offer is subject to confirmation and non-binding. Changes and errors in technical data or specifications as well as prior sale reserved. Used machines are sold as seen, without any warranty claims. Delivery ex works, packaging and insurance exclusively unless otherwise agreed. Price is net plus legally applicable VAT. Payment to be made, as is customary for used machines, prior to loading.

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 470 mm, turning diameter: 240 mm, travel distance X-axis: 355 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rotational speed (max.): 6,000 rpm, The DMG MORI CTX alpha 500, year 2023, is a high-precision and reliable lathe that can handle all machinable materials. With the addition of a bar feeder, it is ideally optimized for series production. Its sub-spindle enables fast and precise machining of both sides of the workpiece. Furthermore, the CTX features a Y-axis, which allows for certain milling operations to be performed directly, ensuring the fastest possible production process. Technical data: − Year of manufacture: 2023 (commissioned in December 2023) − Spindle hours: 969 h − X-axis travel: 355 mm − Z-axis travel: 525 mm − Y-axis travel: 80 mm − Maximum turning length: 470 mm − Maximum machining diameter: 240 mm − Maximum bar capacity: 65 mm − Maximum spindle speed: 6,000 rpm − Maximum speed of driven tools: 5,000 rpm − 12-position star turret, with all 12 tool positions driven − Sub-spindle with tailstock function Iedpsw Awk Eefx Ab Isa − Bar feeder for automated production

Condition: ready for operation (used), Year of construction: 2005, operating hours: 57,588 h, functionality: fully functional, machine/vehicle number: 07500000781, spindle speed (max.): 12,000 rpm, spindle bore: 79 mm, swing diameter over bed slide: 640 mm, spindle diameter: 120 mm, center height: 1,343 mm, distance between centers: 1,930 mm, TECHNICAL DETAILS Center height: 1,343 mm Center distance: 1,930 mm Max. swing diameter: 640 mm Work Spindle Spindle head according to DIN: flat flange Size: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm Max. chuck diameter: 200 / 250 / 315 mm Max. torque at 100/40% duty cycle: 270 / 390 Nm Infinitely variable speed range: 20 to 4,000 / 12,000 rpm Slide Tool system: disc turret / tool spindle Number of saddle slides: 3 Number of cross slides: 2 Longitudinal travel: z₁ = 1,585 mm / z₂ = 1,400 mm / z₃ = 1,500 mm Cross travel: x₁ = 550 mm / x₂ = 180 mm Tailstock Quill taper: MK5 Max. tailstock offset, manual / automatic: 1,500 mm Feed Rate Rapid traverse, longitudinal: Z₁ = 65 / Z₂ = 40 / Z₃ = 40 m/min Rapid traverse, cross: X₁ = 40 / X₂ = 24 m/min Feed force, longitudinal: Z₁ = 7.5 kN / Z₂ = 11 kN / Z₃ = 11 kN Feed force, cross: X₁ = 7.5 kN / X₂ = 9 kN MACHINE DETAILS Year of manufacture: 2005 Length: 8.9 m Width: 4.5 m Height: 3.1 m Weight: 24,000 kg Iodpfxeww Hafe Ab Isa Power-on hours: 102,104 h Spindle hours: 57,588 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,500 h, functionality: fully functional, Control: OSP100L Year of manufacture: 2005 Operating hours: 62,477 h Spindle hours: 8,169 h Isdpfx Aswww Imjb Iea Number of spindles: 2 C-axis on main and sub spindle Number of turrets: 1 Milling spindle: 1 Turret stations: 12-position, VDI40 Y-axis Tool holders on milling spindle: HSK63 Tool magazine: 40-position Chuck on main and sub spindle Tool package: 30x HSK holders, 6 pcs VDI 40 holders Parts feeder with safety fence and 40 tool holders

Condition: used, Year of construction: 2001, operating hours: 30,920 h, functionality: fully functional, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, The machine is in good condition and is still in operation. Year of manufacture: 2001 Process: X205 / Z 580 Tool change positions: 12 Speed: 6000 Control input: 30920H Remarks: - The price does NOT include any accessories! Isdswcbcfopfx Ab Ija - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty - Advance payment (invoice) or cash upon pickup

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Iodpfx Aeug Uc Nsb Isa

Condition: ready for operation (used), Year of construction: 2014, operating hours: 812 h, functionality: fully functional, machine/vehicle number: 3097971, turning length: 2,032 mm, turning diameter: 648 mm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 2,032 mm, Turn-mill center with only 812 operating hours! TECHNICAL DETAILS Iedpsw Nwq Djfx Ab Isa Working area Max. turning length: 2,032 mm Max. turning diameter: 648 mm Travel X-axis: 432 mm Z-axis: 2,032 mm Spindle Spindle nose: A2-8 Spindle speed: 2,400 rpm Spindle bore: 117 mm Bar capacity: 102 mm Spindle motor power: 30 kW Chuck size: 381 mm Tool changer Stations: 12 MACHINE DETAILS Dimensions Dimensions (L x W x H): 6,750 x 2,200 x 2,300 mm Weight: 13,400 kg Operating hours: 812 h EQUIPMENT Fully programmable servo tailstock Chip conveyor Handwheel Pallet with tools

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Iedpfx Ajvitznjb Ioa Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Isdpfxovt Tu Ns Ab Isa Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: good (used), Year of construction: 1997, operating hours: 20,200 h, travel distance X-axis: 420 mm, travel distance Z-axis: 1,120 mm, CNC lathe WFL M30 Year of manufacture: 1997 Ijdov Ad Ryopfx Ab Isa Control: Siemens 840C Travel path X: 420mm Travel path Z: 1,120mm Number of spindles: 2 Spindle passage main/counter spindle: 77mm Turret: 1 Turret stations: 12 Tool holders: Capto C4 High pressure: 20 bar Collet chuck: 2 pieces 250mm Documentation

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5005 + 5006, turning length: 6,500 mm, turning diameter: 500 mm, spindle motor power: 7,500 W, spindle speed (min.): 5 rpm, spindle speed (max.): 500 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 6,500 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, type of input current: three-phase, torque: 12,500 Nm, workpiece weight (max.): 10,000 kg, total height: 3,800 mm, total length: 16,000 mm, total width: 6,000 mm, quill diameter: 200 mm, quill travel distance: 300 mm, swing diameter over bed slide: 950 mm, center height over cross slide: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, NC turning and milling center, manufacturer Berthiez Isdpfxswa In Ns Ab Ija Two machines available Serial numbers: 5005 and 5006 Unit price: €20,000 Three-jaw chuck 50-position tool changer for milling tools Tool changer for turning tools Chip conveyor Tool holder SK50 2 steadies Tailstock Control unit: Siemens Sprint 8ME Included in the offer: milling angle head, drilling angle head, grinding attachment EB22 Dismantling and transport are the responsibility of the purchaser.

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min Iedpfx Abev Imzfe Isa EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Traub CNC lathe TNC65DGY, TX8I, year 2005, serial no. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 VDI30 turrets, Hainbuch BZI65 on main and counter spindle, parts gripper, Iemca Master 880MP-E loading magazine, Isdpfswi I Eyex Ab Iea Condition Very well maintained, good condition, serviced. Machine geometry has been checked and corrected/adjusted. Machine can be viewed under power – video available. 6-month warranty on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to spare parts, not to downtime, labor, or travel time. The warranty expressly does not apply to parts other than those listed above, e.g., wear parts, electrical, electronic, hydraulic, etc.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 316 h, functionality: fully functional, machine/vehicle number: 3097899, turning length: 355 mm, turning diameter: 229 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 355 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chuck size: 165 mm Maximum turning diameter: 229 mm Turning length without workpiece holder: max. 355 mm Bar capacity: 44 mm Spindle Maximum spindle speed: 6,000 rpm Motor power: max. 11.2 kW Torque: max. 102 Nm at 1,300 rpm Spindle nose: A2-5 Spindle bore: 58.7 mm Swing Diameter Over front cover: 641 mm Over cross slide: 413 mm Over tailstock: 597 mm Travel and Feed Rates X-axis travel: 200 mm Z-axis travel: 355 mm X-axis rapid traverse: 30.5 m/min Z-axis rapid traverse: 30.5 m/min MACHINE DETAILS Electrical Data Power supply (3-phase): 354 - 488 V Dimensions Operating height: max. 1,803 mm Operating width: max. 3,200 mm Operating depth: max. 2,108 mm Operating Hours Power-on time: 7,291 h Cycle start time: 316 h EQUIPMENT 15" LCD color display with USB interface 1-MB program storage Synchronized tapping BOT turret with 12 tool stations Isdpfxewy Rxds Ab Ioa

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Iedowzkzzepfx Ab Isa Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: excellent (used), Year of construction: 2019, Horizontal machining center Müga H320-P Control: Siemens 828D Travel paths X,Y,Z 350,350,350 mm Table size 315 x 315 Rapid traverse X,Y,Z 48,48,48 m/min Tool holder ISO40 Speed max. 15,000 rpm (15,000 optional) Power 7.5 kW Number of tools 36+1 Tool holder: SK40 Tool changer  Swivel arm Switch table Equipment: 4th axis Lehmann Internal cooling 20 bar Coolant system Chip conveyor Tool package (approx. 180 tool holders) Tool measurement (Renishaw) Workpiece measurement (Renishaw) Vices (see pictures) Tool breakage monitoring (Renishaw) Tool breakage monitoring (Blum)     Machine is connected to the power supply in production. Isdpfjvzmyhex Ab Ija

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Iedpjv E Hk Ijfx Ab Isa Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: good (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle bore: 68 mm, overall weight: 3,200 kg, TECHNICAL DETAILS Turning diameter: 200 mm Turning diameter over cross slide: 260 mm Spindle bore: 68 mm Control: Siemens with ShopTurn Iodpfewbu E Dex Ab Ija MACHINE DETAILS Total weight: 3,200 kg EQUIPMENT - Driven tools (2 axial, 2 radial) - Schunk 201 chuck - Collet chuck including various collets - Various rotary plates

Condition: good (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. Ijdpfowi Izhox Ab Ioa The machine's geometry has been checked and corrected/adjusted.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Machining diameter: 320 mm Turning diameter over slide: 320 mm Machining length (chuck workpiece): 180 mm Bar capacity: 51 mm Travels and feeds X-axis travel: 240 mm Y-axis travel: 100 mm Z-axis travel: 495 mm X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 10 m/min Z-axis rapid traverse: 33 m/min Spindles Number of headstocks: 2 Main spindle speed: 5,000 rpm Main spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Spindle bore: 61 mm Counter spindle speed: 5,000 rpm Counter spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Tool turret Number of tool positions: 2 x 16 Tool shank height: 25 mm Boring bar shank diameter: 40 mm Turret: with driven tools Driven tools Iodpfxjwi Na Ss Ab Ija Speed: 4,500 rpm Drive power: 3.7 kW MACHINE DETAILS Spindle chuck: Kitagawa B-208 (210 mm) Control: Mazatrol 640T Machine weight: 8,400 kg EQUIPMENT - 2 x 16-station tool turrets - CNC option package EIA / ISO programming - Air purge device on the chuck - Flex GL 150F gantry loader with pallet conveyor - Tool-Eye - Partition wall - High-pressure cooling 70 bar - Chip conveyor Mayfran ConSep 2000 II

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Operation: 5,040 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Iodpfx Abjwzkvfs Isa Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: used, Year of construction: 2011, operating hours: 51,400 h, functionality: fully functional, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main/spindle and counter-spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, counter spindle, chip conveyor, band filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories; approx. 4 driven tool holders, 15 fixed holders Breuning short bar loader Approx. 114,586 power-on hours Iodpfx Aowxc Hkjb Ioa Approx. 51,400 production hours Good condition Connected to power, available for inspection Delivery time approx. 2 weeks, by arrangement