Used Turning Master for sale (9,737)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered). Hsdpfxszcplyo Abtjt

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Hedpfxeziavne Abtjt Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Accessories Chip conveyor Coolant tank with washing pumps Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Condition: good (used), Year of construction: 2008, CNC Swiss turn Machine type: Citizen C-32 VIII 2M8 Year: 2008 SPECIFICATIONS Main Spindle Hsdpszim Evjfx Abtot Max. turning length: 320 mm Turningdiameter: 32 mm Spindle speeds: 200 - 8.000 rpm Subspindle Spindle speeds: 200 - 7.000 rpm Driven Tools Equipment Bar loader magazine: FMB turbo 3-36

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Hsdpfxjzkkcuo Abtjt Main motor 40hp Newall 2 Axis Digital Read Out

Condition: excellent (used), General machine data: Manufacturer: GILDEMEISTER Model: CTX 500 E Machine type: CNC lathe / CNC slant-bed lathe Year of manufacture: 1998 Country of manufacture: Germany Control system: HEIDENHAIN CNC Pilot Work area: Max. turning diameter: approx. 440 mm Max. turning length: approx. 1,000 mm Swinging diameter over machine bed: approx. 680 mm Swinging diameter over cross slide: approx. 455 mm Main spindle Max. spindle speed: 3,600 rpm Spindle bore: approx. 107 mm Spindle drive power: approx. 23 kW Axes and travels Travel X-axis: approx. 220 mm Travel Z-axis: approx. 1,000 mm Rapid traverse X-axis: approx. 24 m/min Rapid traverse Z-axis: approx. 30 m/min Tool turret Number of tool stations: 12 Hjdjzklu Espfx Abtet Tool holder: VDI40 Driven tools Tailstock CNC lathe with tailstock Suitable for machining longer workpieces Hydraulic tailstock quill Quill diameter: approx. 120 mm Quill holder: MK 5 Machine dimensions and weight Machine length: approx. 5,020 mm Machine width: approx. 2,200 mm Machine height: approx. 1,900 mm Machine weight: approx. 7,500 kg

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz Hodpfszgx A Ijx Abtet - Variable speed control via SEW frequency inverter - Cable remote control - Clockwise and counterclockwise rotation - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Hedjzl Ez Ujpfx Abtot Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: used, mileage: 702 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 4,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,300 mm, total width: 2,200 mm, total height: 3,280 mm, loading space length: 4,500 mm, loading space width: 2,060 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, soot filter, tail-lift, Construction: Dry cargo box with insulated walls, * Dimensions i.e. 4,500 mm x 2,060 mm x 2,200 mm, * LBW Dhollandia 750 kg, * 2 rows of anchor rails, * side door * roof spoiler. Equipment: * Air suspension, rear axle, * air conditioning, * double passenger seat, * heat-insulating glazing, * adjustable steering column (steering wheel), Technology: * radio * hands-free system Bluetools, * rear view camera * daytime running lights LED, * exterior mirrors electrically adjustable * outside temperature display, * on-board computer, Safety/Environment: * airbag, driver's side, * brake assist, * driver assistance system: lane change warning system, * low emissions according to exhaust standard Euro 6 Other: * German original delivery, * 1 previous owner, * model update (2), * engine 2.3 L - 120 kW dCi Diesel CAT, * wheelbase 4332 mm, * payload 1,225 kg according to ZLB, * permissible total weight 4.5 t, * COC document available, * derating to 3.5 t not possible. Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles from the fields of vans, commercial vehicles, and construction machinery in stock! Hodjxz Ir Iepfx Abtet We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery as a trade-in. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be verified separately. Errors and prior sale are subject to change.

Condition: used, mileage: 60,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, loading space length: 4,700 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, Year of manufacture: 2020 Suspension: leaf suspension Front axle: Steering Empty weight: 2.990 kg Carrying capacity: 1.510 kg GVW: 4.500 kg Tail lift: Zepro Radiografisch, tail lift, 750 kg = Additional options and accessories = - 3 Seats - Airbag - Alarmsysteem class 1 - Camera system Hsdpfxsznbb Nj Abtet - Climate control - Comfort seat with heating - Heated driver's seat - Immobiliser - LED- lighting - Outside temperature display - Radio/CD/USB - Reversing camera - Roof and side spoiler - Side door - Toolbox stainless steel 3x = Remarks = Sub Woofer

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Hjdezig Tmspfx Abtjt Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Hsdpozd R S Ajfx Abtot Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump Hedszkpxnjpfx Abtjt The machine can be viewed in operation by appointment.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Z-axis: 3,200 mm, workpiece weight (max.): 25,000 kg, travel distance X-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 51,000 W, chuck outer diameter: 2,500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1,500 rpm, turning diameter: 3,000 mm, total height: 3,000 mm, type of input current: three-phase, turning height: 3,200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 150 rpm, torque: 452 Nm, overall weight: 40,000 kg, year of last overhaul: 2022, Machine was overhauled in 2022 with new spindle servo motor and control unit The machine is under power and can be checked in our workshop Details are as below. Fagor 8055i-TC-4 Cnc Kontrol Ünitesi ii) 512 Mb Harddisk iii) Look Ahead (200 Blok Önden Okuma) iv) USB ve RS232 Haberleşme Protokolleri v) Türkçe Kullanım Paneli, vi) Türkçe Alarm Listesi vii) Parametrik Programlama Özelliği viii) 12 Dil Kullanım Seçeneği Hjdpfx Aezl H Ipebtet ix) Manual yada Otomatik Takım Kalibrasyon x) Vidalı Mil Telafisi (Ballscrew Compensation ) xi) Kontrol Üzerinde Ballbar Testi ve Osilascop Özelliği xii) 4 Eksen Motor & Sürücü Kontrol Kabiliyeti xiii) Uzatmalı standart El çarkı (3 M) xiv) 3 Eksen Fagor Servo Motor & Sürücüleri Spindle Servomotor, Power (S1/S6) 51/71 kW, Nom. Torque (S1) = 325 Nm, Max Torque 1 FM7-A510-C3B1-E01 (S6) = 452 Nm, 1500 / 5000 rpm Integrated C AXIS Encoder, Foot Mounting,, Keyway, Protection Degree IP44, ")

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm Hjdpfx Aox Irzvobtet power 24 kW, chip conveyor

Condition: used, Year of construction: 2004, turning diameter 250 mm swing diameter 250 mm turning height 250 mm Control Siemens Sinumerik 840 D total power requirement 60 kW Hedpfx Abezdvgfstot weight of the machine ca. 9 t

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Hedpfx Aezlhmmsbtet Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 2,000 mm, Mazak CNC Mill – Turn Centre Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Hodezlhp Iopfx Abtjt Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg Hjdpfx Aswudkiebtst The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Hedpszf H Ezefx Abtjt Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and Hjdpfx Abegvkpfotet includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Condition: good (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning center TNA480, TX8D, year of manufacture 1990, serial number >550. C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, hollow cylinder chuck, 3-jaw chuck KNCS315. Good condition, ready for operation. Machine geometry has been checked and corrected/adjusted. Scrapers and belts have been inspected, replaced, maintenance performed after 4000 operating hours. Hodpfxezcdgfe Abtot The photos were taken in the production environment; the machine will be cleaned and inspected further. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please provide us with your offer price.) Several units are available and are part of a process chain. Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. Hodpfeyiarujx Abtst No sales to private individuals.

Condition: used, mileage: 83 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 01/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 16.8 m³, loading space length: 3,800 mm, loading space width: 2,100 mm, loading space height: 2,130 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Navigation is possible with a smartphone. Wind deflectors, air conditioning, central locking with remote control, heated exterior mirrors, electric front windows, on-board computer, speed control system (cruise control), multi-function steering wheel, rear parking assistance, spare wheel with road tires, light and rain sensor, LED daytime running lights, fog lights, radio with Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, long wheelbase, heat-reflecting glass, storage package, tachometer, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), comfort seats, center armrest, driver's comfort seat - height-adjustable with armrest and lumbar support, start/stop automatic, diesel particulate filter, service booklet maintained, immobilizer, side marker lights, outside temperature display, power steering, low frame, refrigeration unit e.g. -19 degrees or heating, stand-by and driving cooling, Zanotti Z380GH+230V refrigeration unit, side loading door on the right, lashing rails for securing the load, rear tailgate doors with increased opening angle (270 degrees), rear step, daytime running lights, shift point indicator, interior filter: pollen filter, multi-functional double passenger seat, storage compartment, permissible total weight 3.50 t, electronic brake force distribution, brake assist, steering column (steering wheel) height-adjustable, electronic stability program (ESP), generator 185 A, body/superstructure: box body, wheelbase 4215 mm, drive type: front-wheel drive, 6-speed transmission. Financing example * Cash price: 56,882.00 Euro * Down payment: 11,376.00 Euro * Term: 60 months * Net loan amount: 45,506.00 Euro Hedpfxoxyahrs Abtet * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 53,173.00 Euro * Monthly rate: 886.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for whom the car dealership acts as a loan intermediary in an advisory capacity. Subject to creditworthiness. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing is possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding, and no guarantee is given for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will also accept your old vehicle in part exchange. Retrofitting options include: - Trailer couplings up to 3500 kg, - auxiliary heaters, - screen for reversing camera and/or navigation via mobile phone (Android Auto), - reversing system with rear camera, - workshop equipment, - cruise control, - retrofitting of a tail lift and other individual solutions for your business needs, available for an extra charge.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Hjdpfxezmggnj Abtst Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. Hedpjzpyvhofx Abtot The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.