Used Turning Tools for sale (38,755)

Condition: excellent (used), Diameter: 800mm 3 Chuck: yes Spindle bore:130mm Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Fpodpfx Aajwvrp Ae Njg Width: 800mm Height: 400mm Weight: 200kg

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight Fpsdpfx Aajwpufgj Nog 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm Fpedewvq Taspfx Aa Neg indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Fedpsvgcpvjfx Aa Nspg Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Fjdpex Tp Ahofx Aa Nopg Type: UTB Year: 2005

Condition: excellent (used), Year of construction: 1999, Clamp width: 175mm Max. opening: 500mm Manuel or hydraulic: manuel Number of matching vices:4 Length: 766mm Width: 170mm Height: 70mm Fedpfx Aaeydbwde Nepg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height Fsdsrg A N Njpfx Aa Nopg 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A Fpodpfxjy Ralns Aa Neg total power requirement 23 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Fpsdpoy N Du Rsfx Aa Nsg Net weight: 2175 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, rotational speed (max.): 5,000 rpm, Control: HEIDENHAIN Plus iT with Turn Plus Fodpfxoy Nizij Aa Njpg Turning length: 1175 mm (with tailstock 1100 mm) Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine

Condition: used, Used milling machine by Deckel Type: FP1 Fpodpjy Rkzaefx Aa Njg Including tools and accessories

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg Fsdpfxeyxqzco Aa Nspg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings Fpedsyr Rnzopfx Aa Neg - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request Fpjdoytbc Sopfx Aa Nog - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2020, CNC multi-function turning center with 9 axes Sub spindle, Y-axis, milling spindle, and turret with driven tools Milling spindle: X: 630 mm Y: 230 mm Z: 1585 mm Swivel axis: 240° 40 tool stations Capto C6 Coolant pump 20 bar Turret (lower): X2: 220 mm Z2: 1515 mm 12 driven tools Coolant pump 10 bar Travel distance of sub spindle: 1550 mm Main spindle: 10" chuck Bar capacity: 75 mm Sub spindle: 10" chuck Bar capacity: 73 mm Control: FANUC F3B5 with 15" Features: Various accessories Oil skimmer Removable tool measurement arm Air conditioning in control cabinet AICC II (600 blocks) LNS chip conveyor, hinged belt right side Fodpey N T Duofx Aa Njpg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Mazak, controller model: Mazatrol M640, workpiece length (max.): 2,820 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 800 kg, table width: 510 mm, table length: 1,460 mm, overall weight: 6,100 kg, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 110 mm, tool weight: 18,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Mazak VTC 200B in very good condition for sale. The machine is fully operational and can be inspected under power at any time. TECHNICAL SPECIFICATIONS: Work Table: Table size 510 x 1,460 mm Max. table load: 800 kg Travel distances: X-axis 1,120 mm, Y-axis 510 mm, Z-axis 510 mm Rapid traverse speed: X/Y/Z-axis 30 m/min Feed rate: 1 - 8,000 mm/min Distance spindle nose to table: 180~690 mm Working spindle: Speed range 40 - 10,000 rpm Fsdpfx Asy Rarnoa Njpg Tool holder: CAT 40 Main drive power: 15 kW Max. torque: 98 Nm Tool magazine: Number of tool stations 30 Max. tool diameter: 80 mm (110 mm with adjacent station empty) Max. tool length: 350 mm Max. tool weight: 8 kg Machine data (standard configuration): Total connected load: 22.7 kVA Machine weight, approx. 6,000 kg Machine dimensions (L x W x H), approx. 3.00 x 2.90 x 2.80 m

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Fjdpemck Ryefx Aa Nopg Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm Fodpfjw Uf Hwox Aa Nopg weight 3000 kg good condition

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Fedpodzp Tbsfx Aa Njpg Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Fpjdpfx Aotwpyyja Nsg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Tool presetting device Zoller SMP4/4 Full service history Top condition Fpedpjy N Diuofx Aa Nog

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° - Focus system: Analog focus display with dynamic cross hairs Fpodpfx Aeyanf Tsa Neg Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers Fpjdpey Ehkbsfx Aa Njg – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany

Condition: good (used), Year of construction: 1982, VERTICAL TURNING LATHE SC22 Year of manufacture: 1982 Manufacturer: I.M. ROMAN (Romania) Main technical data: - Table diameter: 2000 mm - Max. swing: 2200 mm - Max. workpiece height: 1500 mm - Max. workpiece weight: 12000 kg - Table speed range: 2–92 rpm - Vertical travel (Z axis) of rail head: 1200 mm - Main motor, DC type: 55 kW - Machine weight approx. 31000 kg Fjdpoyzxafofx Aa Nspg Accessories: 4 jaws for faceplate The machine is under power. For more details please contact us.

Condition: used, Year of construction: 2013, operating hours: 26,721 h, functionality: unexamined, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, table length: 245 mm, table width: 140 mm, SAACKE UW1F Center height: 155 mm Maximum tool diameter: 200 mm Maximum tool length: 270 mm X/Y/Z travels: 530/400/320 mm Feeds: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Rotation range: 240° Rotational speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Rotational range: ± 15 minutes Maximum speed: 600 rpm Spindle bore: 32 mm Axis drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Fodpfx Aeyma I Hoa Njpg Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: End mills Profile cutters Clamping systems Drills and step drills Roundness regulation 3D collision control Zero point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006