Used Turning Tools for sale (39,235)

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 1780 mm Measurements depth 2800 mm Measurements height 1850 mm Machine weight 4400 kg Nwodpfx Aew Epy Dja Ien Control Unit Brand FANUC Main Drive Number of spindles 2 Media Chip conveyor Yes Additional Equipment Manual tool measuring arm Part-catcher Bar-feeder interface Number of Tool Stations: 12 / Shank Diameter According to DIN 69880: 30 mm / Number of Driven Tools: 12 / Maximum Speed: Up to 5000 rpm / Maximum Power (40% DC): 5.65 kW Pneumatic workpiece ejection device. / Tool monitoring system (Fanuc). / Tool monitoring system (Fanuc). / Direct measuring system for X/Y axes. / High-pressure pump (12 bar). / Manual tool measuring probe (MARPOSS). / Bar package and bar interface. Chip conveyor with side discharge. This DMG MORI CLX350 V6 was manufactured in 2019. A horizontal turning machine featuring a Fanuc controller, Ø210 and Ø175 chucks, a manual tool measuring arm, part-catcher, and bar-feeder interface. If you are looking to get high quality turning capabilities consider the DMG MORI CLX350 V6 machine we have for sale. Contact us for more information. Application Types Turning

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm Nwsdjqwlmqopfx Aa Ion tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Milling, Turning, 5-Axis Simultaneous Machining Siemens 840D sl General X travel: 2300 mm Y travel: 1600 mm Z travel: 900 mm Swivel Head Type: 1-axis continuously adjustable swivel head or full interpolation Swivel movement: via B-axis B-axis swivel range: 0° to -90° Indexing: 0.001° Nedpfoxp Izfjx Aa Ijwn Swivel radius (pivot point to spindle nose): 290 mm Machine Table Clamping surface rotary table: Diameter 1600 mm NC Rotary Table: AXA RTA 6D, faceplate 1600 mm T-slots: 18 mm H9, reference slot H7 T-slot layout: radial/star-shaped T-slot spacing: 80 mm Table load – positioning mode: Max. 5000 kg at max. 10 rpm Table load – rotary mode: Up to 2500 kg Rotary speed: Up to max. 250 rpm Measuring system: Direct measuring system, accuracy +/- 1 second Tool Changer (SK50) Type: Side-mounted chain magazine, located outside the working area Tool holder: SK 50, DIN ISO 7388-1 AD / DIN ISO 7388-3 AD Tool stations: 60 (Tower 1 / 1st chain = 30 places, Tower 2 / 1st chain = 30 places) Max. tool diameter (standard): Max. 110 mm Tool diameter with adjacent stations free: Max. 180 mm Tool length: Max. 400 mm Tool weight: Max. 15 kg per tool Weight in gripper: Max. 15 kg Tool Changer (CAPTO C6) Type: Second magazine chain in XTS turret for turning tools Tool holder: CAPTO C6 Tool stations: Tower 1 / 2nd chain = 12 places Max. tool diameter (standard): Max. 85 mm Tool diameter with adjacent stations free: Max. 135 mm Tool length: Max. 400 mm Tool weight: Max. 8 kg per tool Spindle & Drives Feed force X/Y/Z: Max. 9000 N Rapid traverse X/Y/Z: 30/30/25 m/min Feed rate X/Y/Z: Standard 1 - 9999 mm/min Power: Max. 56 kW at 40% duty cycle Torque: Max. 355 Nm at 40% duty cycle Speed range: Up to max. 9000 rpm Critical speed: 1500 rpm Other features: Two hinged belt chip conveyors, rear discharge. Discharge height approx. 1250 mm. Internal coolant supply through the spindle. Suitable for coolant pressure up to 30 bar. Complete machine enclosure with powered doors Further details available upon request The technical specifications were prepared to the best of our knowledge. No liability is assumed for correctness. We recommend inspecting the machine. Please call to schedule an appointment.

Condition: good (used), Year of construction: 2003, movable headstock 10 axes Spindle speed 0 - 10,000 rpm C axis TOOL CARRIER (X1-Y1 / X2-Y2) Nedpfx Ajxp Nf Ssa Iewn - 2 independent cross slides with 2x5 tools - Drive unit 100 - 8,000 rpm for up to 4 driven tools on X2-Y2 NO front attachment SUB-SPINDLE (X4-Y4-Z4) - Spindle speed 100 - 8,000 rpm - Slide with 3 independent axes SECONDARY OPERATIONS - Turret with 7 positions (4 axial and 3 radial) - Spindle speed 100 - 10,000 rpm Part conveyor Bar feeder Robobar SBF 532

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH Nodoxpugbspfx Aa Ijwn

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Njdpsxlac Hsfx Aa Ijwn Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Machine weight: 75 tons Machine dimensions: 9.1 x 3.45 m

Year of construction: 2006, condition: ready for operation (used), Control Unit Nwedexq Ht Aspfx Aa Ijn Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Njdpfoxpizgex Aa Ijwn Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: good (used), Year of construction: 2014, USED MACHINE For sale is a Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The machine is in good condition – it is a used machine. Technical data Nwodpfx Aoxnbvgsa Ion - Center height: 230 mm - Max. turning diameter: 455 mm (up to 800 mm with optional outboard turning device!) - Center distance: approx. 680 mm (expandable!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) anti-release groove* - Spindle and tailstock: Morse taper MK2 - Speeds (2 belt ranges): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: good (used), Year of construction: 2001, Movable headstock 10 axes Spindle speed 100 - 8,000 rpm C-axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2 x 5 tools Nwsdpoxpv Elsfx Aa Ijn - Drive unit 100 - 8,000 rpm for up to 4 driven tools on X2-Y2 FRONT UNIT (X3-Z3) - Cross slide with 4 positions - Spindle speed 100 - 6,000 rpm SUB SPINDLE (X4-Y4-Z4) - Spindle speed 100 - 8,000 rpm - Slide with 3 independent axes SECONDARY OPERATIONS - Holder with 7 positions (4 end and 3 cross) - Spindle speed 100 - 10,000 rpm Workpiece conveyor Long turning option up to 600 mm Bar loader for 3m bars

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler Nwsdjxphk Tspfx Aa Ijn

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min Nodpfx Aaev Rrq Dj Iewn feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 8600 kg Control Unit Brand MAZATROL Main Drive Number of axis 3 Movement X-Axis Movement 257 mm Y-Axis Movement 152 mm Z-Axis Movement 1607 mm Additional Equipment With steadyrest Njdsw Rhafjpfx Aa Iewn This 4-axis Mazak QT Nexus 350 MY was manufactured in 2006. It features a horizontal turning machine with driven tools and milling capabilities. X-Axis travel is 257mm, Y-Axis travel is 152mm, and Z-Axis travel is 1607mm. Consider the opportunity to buy this Mazak QT Nexus 350 MY horizontal turning machine. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2017, operating hours: 1,760 h, functionality: fully functional, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 185 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, spindle nose: A2-6, overall weight: 4,000 kg, Equipment: rotational speed infinitely variable, AS GOOD AS NEW WITH ONLY 1760 SPINDLE HOURS!!! This DMG MORI CLX 350 is truly in mint condition and comes standard with: - HAINBUCH TOPlus mini Axzug 65 - 3-jaw DMG MORI chuck - Chip conveyor - Siemens electronic handwheel - Workpiece catcher/ejector - Marposs measuring arm - Original DMG mist extraction system with unused hose Nwedpfx Aasxp Hqre Ijn - Foot pedal for clamping/releasing main spindle - Various tooling (driven & static) - Interface for bar feeder - Rinse gun (5 bar)

Condition: refurbished (used), Year of construction: 2003, CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK AND SINUMERIK 840D CONTROL _____ WORKING AREA Centre distance: 3000 mm Swing diameter over bed: 1220 mm Swing diameter over top slide: 1140 mm Longitudinal travel (Z): 3330 mm Cross travel (X): 920 mm Distance spindle nose to tailstock tip: 3792 mm TURNING SPINDLE Spindle head DIN 55026 design: B20 Spindle diameter in front bearing: 320 mm Spindle bore: 245 mm MAIN DRIVE AC drive with 2-speed gearbox Drive power (100% duty cycle): 90 kW Max. spindle speed: 1000 rpm Max. spindle torque: 10,248 Nm C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Nwjdpfx Aexrfd Nsa Ion Smallest programmable increment: 0.001 Max. speed: 20 rpm Max. spindle torque (100% duty cycle): 3000 Nm Holding torque of disc brake: 6000 Nm FEED DRIVE Cross slide, turning-drilling-milling unit: AC servo drive Feed force longitudinal (Z): 30.0 kN Feed force cross (X): 31.5 kN Feed force Y-axis, 55 kW: 25.0 kN Rapid traverse speed: longitudinal (Z): 15.0 m/min cross (X): 15.0 m/min Y-axis: 12.5 m/min Rapid traverse, swiveling B-axis: 90° BALL SCREW Longitudinal (Z-axis) diameter x pitch: 63x20 mm Cross (X-axis) diameter x pitch: 63x10 mm TAILSTOCK Quill diameter: 180 mm Quill stroke: 200 mm Quill force (adjustable): 5400–40000 N Quill with integrated bearing: MT 6 TOOL CARRIER (Single tool carrier, turning-drilling-milling unit) AC drive, drive power (100% duty cycle): 55 kW Spindle speed max.: 3200 rpm Max. spindle torque (100% duty cycle): 730 Nm Travel perpendicular to X/Z plane (Y-axis, 55 kW): 650 mm (-300/+350) Swivel angle of milling spindle (B-axis): -110°/+90° Spindle mounting for tools as per DIN 69893: HSK-A100 Milling spindle diameter in front bearing: 130 mm Swivel torque B1: 700 Nm Holding torque clamped: 2000 Nm Holding torque indexed and clamped: 7000 Nm

Year of construction: 1998, operating hours: 45,996 h, condition: ready for operation (used), General Data Measurements width 1750 mm Measurements depth 3210 mm Measurements height 1750 mm Machine weight 5500 kg Control Unit Brand HEIDENHAIN Model CNC Pilot Movement Z-Axis Movement 635 Nsdpfx Asxqtbtja Iewn This Gildemeister CTX-400S2 was manufactured in 1998. A robust horizontal turning machine featuring a HEIDENHAIN CNC pilot control unit, it offers a Z-axis movement of 635 mm and can handle workpieces up to 570 mm in diameter. With a machine weight of 5500 kg and dimensions of 3210x1750x1750 mm, it's built for stability and precision. Consider the opportunity to buy this Gildemeister CTX-400S2 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: refurbished (used), Year of construction: 2020, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Nwjdpfx Aswwkvwsa Isn Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Year of construction: 2021, operating hours: 280 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 5000 rpm Spindle motor power 11/22 kW Nwedpfx Aaexpkn Uo Ion Tool taper A2-6 Number of axis 4 Movement X-Axis Movement 165/195 mm Y-Axis Movement +- 50 mm Z-Axis Movement 700/720 mm Turret Number of turrets 2 Tools Number of index 2x12 Media Chip conveyor Yes Internal cooling Yes Additional Equipment USB interface Three-colour signal light 1 set of soft jaws CHIP CONVEYOR HS with lateral ejection Transformer incl. cable Manual compressed air gun Bar feeder interface // Bar loader interface Parts catcher main spindle Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Turret Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock Nwjdpfexpktwex Aa Ion This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Njdjxpkmqepfx Aa Iown Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1730 Measurements depth 2110 Measurements height 1820 Machine weight 4500 Main Drive Spindle speed range 45 - 4500 Spindle motor power 11 kW Nsdpfjxpkl Tox Aa Ijwn Movement X-Axis Movement 235 mm Z-Axis Movement 520 mm Workpiece Workpiece drm 390 mm Additional Equipment Hinged belt chip conveyor Some accessories would also be included (see photos) This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe. Application Types Turning

Year of construction: 2013, operating hours: 55,000 h, condition: ready for operation (used), General Data Machine weight 7000 kg Control Unit Brand TRAUB Model TX8i-s Main Drive Spindle speed range 8000 rpm Number of axis 7 Additional Equipment Coolant pump 3 bar / Coolant pump 8 bar Swarf conveyor, hinged belt type H=1000 mm Linear encoder X-axis for revolver top/bottom Fabric filtration for coolant: grade of filtration ca. 30-40 µm High-pressure coolant pump 20 bar Nwsdpfxoxn U D Ds Aa Ien CO2 fire fight system Kraft & Bauer This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CTX 420 Main Drive Nedpfsxn Dmuex Aa Ijwn Number of axis 3 Additional Equipment Chip conveyor Oil mist separator via mechanical industrial filter, 1500 m³/h Package bar processing G Signal light 4-color Hollow clamping device, Ø 68 mm Lifting beam included This Gildemeister CTX 420 linear was manufactured in 2008. A robust horizontal turning machine featuring HEIDENHAIN Plus iT CNC control, tool drive, C-axis, Y-axis, and a chip conveyor. It includes a tailstock and a tool measuring device. The tool turret was completely overhauled this year. Consider the opportunity to buy this Gildemeister CTX 420 linear horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1440 Measurements depth 2730 x x Measurements height 1620 mm Machine weight 4200 kg Control Unit Brand SIEMENS Model 840D-SolutionLine Nwodpfxoxn Dm Us Aa Ion Main Drive Spindle speed range 4500 Spindle motor power 11 kW/ 16.5 kW Number of axis 2 Movement X-Axis Movement 230 mm X-Axis Rapid Traverse 15 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 425 mm Turret Number of turrets 1 Tool taper DIN 69880/30 mm Tail Stock Pinol diameter 80 mm Tools Number of station 12 Media Oil tank 30 liters Additional Equipment Full splash guard cladding + coolant unit Work area light + pneumatic equipment Panoramic window for optimum visibility into the work area This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2015, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1985, condition: ready for operation (used), This 3-axis Schütte SF 26 was manufactured in 1985. It features a pick-off spindle, bar guide, and electronic tapping control, enhancing its horizontal turning capabilities. If you are looking to get high-quality turning capabilities, consider the Schütte SF 26 machine we have for sale. Contact us for more information. Application Types Turning Nwodpfx Aasxn Dlqs Ion