Used Turret Punch Press for sale (14,455)

Condition: used, Year of construction: 1987, pressure 40 t Chodpevu E Iwsfx Alfjd no. of strokes 500 Hub/min total power requirement 5,5 kW

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Codpfxe Adzqaj Alfshd Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm throat 500 mm stroke 60 mm 38 /min. engine output 5 kW 20x20 mm 28x11 mm Overall size 1500x1100x2000 mm weight of the machine ca. 1.150 kg Accessories / equipment: Cedpfx Aoyv Nxhslfehd - punching table

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: HIW1000/610-201, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, electrical contact length stop, emergency stop, foot remote control, quick-change device, For sale is an extremely powerful and versatile hydraulic universal punching and shearing system from the German premium manufacturer Mubea (Muhr und Bender), model HIW 1000/610. This double-cylinder machine allows independent operation at the stations and offers a tremendous punching force of 100 tons (1000 kN) with an extra-deep throat depth of 610 mm. The system is CE-certified, manufactured in 1997, and is ideally designed for heavy-duty applications in steel construction, metalworking, and industrial manufacturing. Technical data: • Manufacturer: Mubea (Muhr und Bender) • Model / Type: HIW 1000/610 • Machine No.: HIW1000/610-201 • Year of manufacture: 1997 • Connection voltage: 400 V / 50 Hz (3 phases) • Control voltage: 24 V • Punching force: max. 1000 kN (100 tons) • Throat depth: 610 mm • Machine weight: 3,150 kg • CE marking: Present Performance data & capacities (for material with 450 N/mm² tensile strength) • Flat steel shear: • max. 600 x 15 mm • max. 400 x 20 mm • Profile steel shear (C and I profiles / flanges): Chedpfe Adzciex Alfsd • S = 13 mm • B = 60 mm • T = 90 mm • Notching: • 90°: max. 160 x 16 mm • 45°: max. 70 x 7 mm • Bar shear: • Square bar (☐): max. 50 mm • Round bar (◯): max. 50 mm • Hole punch: • max. Ø 40 mm in 22 mm material thickness Includes a large amount of accessories and an electrical contact length stop.

Condition: ready for operation (used), Schüco tools, pressing tools, stamping tools, Art. No. 293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5 pieces without a number. Csdped Sc D Sjfx Alfehd

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press * Chedpfsu Icw Hox Alfsd

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed Codjz Rmyhepfx Alfohd - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick - Without hydraulic oil Price on request

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Codpov Tp D Hjfx Alfjhd Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Cedpfx Aoxabrfolfehd Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation Codpex U Eiajfx Alfjhd - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Chedpfez Ayq Eox Alfod

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm Chjdpfxsu Icxqj Alfjd ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Year of construction: 1985, machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm Chjdpecxxnmsfx Alfed column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm boring of tool-holders:Ø 40 x 80 mm groove width:30 mm flute depth:6 mm distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition Chsdpfx Alsk S Htxefjd

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Chedpfx Alefim Thjfed Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Cjdpfewag Rijx Alfjhd Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Cedodzqddjpfx Alfohd Weight: approx. 10 tons Good condition (very little use)

Condition: used, Hoza EMU Punching Machine This machine is ideal for punching out small shapes from paper, rubber, or textile materials. It has a high pressing force and can be placed on any stable table. The cutting process is initiated via a two-hand safety control. Forged blades or band steel cutting tools can be used in the machine. Blade stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer-tone blue Dimensions: 450 x 360 x 600 mm You can find more items in other sizes – new and used – in our shop! Codpsuzhmtjfx Alfshd International shipping costs available upon request!

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m Cjdpecxxycefx Alfehd with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Csdpfxjcxxrdj Alfehd Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm MACHINE DETAILS Chjdpfx Ale Adzp Nsfsd Manufacturer: Haulick + Roos Type: RVD32-540 Year of manufacture: 1983 Machine number: 282047 Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Chedpsyv Nrzofx Alfjd Accessories / equipment: - punching table

Year of construction: 2005, condition: excellent (used), Pneumatic punching machine. Chsdpfx Aeff Apwjlfed

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing, press feeding and metal forming systems, delivering high-performance and customized industrial solutions worldwide. Our press solutions are designed for punching, perforating, embossing and sheet metal forming applications. Depending on production requirements, we offer advanced servo punch press systems for flexible programmable production and high-speed mechanical presses for continuous mass production. These machines can be supplied as standalone units or integrated into complete coil-fed automatic production lines. ⚙️ AVAILABLE PRESS SOLUTIONS 🔹 SERVO PUNCH PRESS The Servo Punch Press is designed for precision, flexibility and intelligent production control. Key Features: 40 Ton punching capacity 6 tool stations for multi-tool operation Dual-servo controlled X-Y punching system Punching at programmable coordinates 22 kW hydraulic punching drive Up to 90 strokes per minute Automatic scrap conveyor system Advantages: High precision punching performance Programmable motion profiles Lower noise and reduced maintenance Energy efficient operation Fast setup for different part designs 🔹 PERFORATION HIGH SPEED MECHANICAL PRESS The High-Speed Mechanical Press is ideal for continuous perforation, embossing and repetitive punching operations in mass production environments. Suitable For: Sheet metal punching Perforating Embossing Tool & die applications High-volume production lines Advantages: Codpfx Aey Anr Telfohd High production speed Stable continuous operation Reliable mechanical drive system Ideal for repetitive operations Cost-effective mass production solution 🔧 ENGINEERING FEATURES Robust industrial machine construction PLC & HMI control systems Easy integration with feeders and automation lines Tooling flexibility based on product design Long service life and low maintenance structure ⚡ OPERATIONAL ADVANTAGES Two technologies for different production needs Flexible solutions from custom parts to mass production Standalone or turnkey line integration Improved efficiency and reduced downtime Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Sheet metal manufacturing Perforated panel production Electrical cabinets HVAC products Construction components Automotive parts White goods industry 🧩 OPTIONAL CONFIGURATIONS Coil feeding integration Decoiler & feeder systems Custom dies and tooling Conveyor systems Automation upgrades Turnkey production solutions 📸 REFERENCE PROJECTS Images and videos can be shared showing different press systems successfully operating in various industrial applications. Additional references and technical details are available upon request.

Condition: new, Year of construction: 2026, neu 2026 090237 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 Csdpfxowirmbo Alfohd 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-