Used Upper Piston Press for sale (15,890)

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Volume flow: 3455 dm³/min Rcsdpexygbljfx Airjh Motor power: 22 kW

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1 h, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 5.5 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Delivery quantity at 7 bar: 605 l / min Sound level: 80 dB (A) Redpfxormnp Hj Airsch Compressed air outlet: 1/2 " Dimensions length x width x height: 86 x 85 x 210 cm Weight: 113 kg Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Rsdpfx Ashk Dfkoiroch Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, machine/vehicle number: MA0173, new KAESER EPC 840-250 lg piston compressor - 10 bar with horizontal lacquered 250 litre container With KAESER DRAIN (tank emptying) Year: 2024 2 cylinders max pressure: 10 bar Rated power: 4.0 kW Volume flow at 6 bar : 590 l/min Volume flow at 8 bar : 530 l/min Sound level: 77 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 1590 x 600 x 1140 mm Weight: 165 kg Visit our shop. Rodpfxsityx Te Airsch We always have a wide range of new and used compressors on hand!

Condition: new, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. Redpfx Asfh R Nyoirsch The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug Rcedpforxu Erex Airoh with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. Redpfx Aioz Sqiijrjch • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Rcsdpfx Aewypqrjirsh Weight: approx. 150 kg In good condition

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 1,00,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn Rcjdpfxjz Sqf Re Airsh

Condition: used, functionality: fully functional, Year of construction: 2012, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Distance between uprights: 2600 mm Rcedpfx Aoyxp Eysireh Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Working speed: 11 mm/s Return speed: 100 mm/s Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production If you have any further questions, please do not hesitate to contact us.

Year of construction: 1993, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 340 l/min tank capacity: 350 l cylinder: 2 St. motor capacity: 37 kW total power requirement: 2,0 kw weight: auf Anfrage kg Rcodeu Nzycepfx Airoh consists of dryer and air pressure tank compressor: - engine capacity 37kW / 1450rpm / pressure capacity 10 bar,flow capacity 340l/min air pressure tank: - make: OSK, type: , für 11 bar, Temp. -10°C bis +50°C, content 350l,CE 92004 dryer/filtering plant: - make: Kaeser, Typ TB 9, permitted ambient temperature -10°C up to +50 C° *

Year of construction: 2022, condition: as good as new (ex-display), REKO 510-B Auxiliary compressor (reciprocating compressor) incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg Rcsdpfjpyhpdox Aireh We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, operating pressure: 11 bar, pressure (max.): 11 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Renner REKO 700D/90 - Demonstration machine Mobile piston compressor with tank With all safety fittings and electrical connection cable with plug and Condor pressure switch with operating hours counter as standard Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve Fully automatic operation thanks to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use - oscillating metals for stationary installation included in the scope of delivery With V-belt drive, 2 cylinders arranged in series for particularly quiet operation Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Option at extra cost: filter pressure reducer for regulated compressed air and compressed air cleaned of condensate, dirt and oil from a tank volume of 50 liters With device supply line and air outlet via safety coupling NW 7.2 Suction capacity 727 l/min Eff. Delivery rate 570 l/min Nominal power 4.0 kW Voltage 400 V Redpeu Ttlcofx Airjch Max. Pressure 11 bar Cylinder/stages 2/2 Speed 1000 rpm Sound level 95 dB(A) Compressed air tank 90 l Dimensions L x W x H 1030 x 483 x 1100 Weight 128 kg

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Besteht aus: Air pressure tank: - Make Mehrer Rcjdeu Nz Slopfx Airjh - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C i.D. *

Condition: good (used), Stock number: 3051 Manufacturer: Schneider Year of manufacture: Model: 500-270 Machine number: 95118451 Operating hours: Pressure: 10 bar Output: 393 l/min Tank Manufacturer: Behälterbau Burgau Year of manufacture: Tank number: 538394 Capacity: 270 l Pressure: 11 bar Temperature: -10°C to 50°C Rsdpfx Aisxw H Ugorjch Connection: 3 kW Footprint: 650 x 700 mm Overall dimensions: 700 x 700 x 1,700 mm Weight: 150 kg

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Rsdpfx Ajzy U Uyjirsch Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Year of construction: 1991, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 5000 l/min motor capacity: 37 kW voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling - suction opening = 500x400mm On sale as is, without test. Redpfx Aiou Nzx Eeroch Can be used as spare parts dispenser if necessary. *

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 • Slide adjustment motor: 2.2 kW x 4 • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Rcjdpoz Stfyefx Airjh Technical Specification Stamping Force 4000 Kn

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW Rcodpfx Aszrpt Usirsh weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: new, Equipment: compressed air system, Refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter For use in environments where compressed air quality as well as durability and efficiency are essential V-belt drive Long service life thanks to two-stage high-performance compressor units with low speed Specially machined cast iron cylinders for minimal oil consumption and long service life Optimal cooling via large fan wheel Motor with overload protection Easy condensate drainage through standard 1/2" ball valve Supplied as standard with Condor pressure switch and pressure gauge Supplied as standard on safety base pallet with vibration dampers Tank manufactured according to German AD 2000 regulations Intake capacity: 650 l/min Filling capacity: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor output: 4 kW / 400 V Rjdpfx Aiowwi Acorjch

Condition: used, Technical details: pressure: 250 t Rcsdpfou N Ddwsx Airjh stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Rjdpfx Aezgvhueiroch Bedienung über Schalttafel *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m Rcodpfxeu N A Uue Airjh further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Year of construction: 2021, condition: used, Technical details: Rcedpfjyzzh Eex Airsh pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). Rcodpfevt Nvpjx Airsh *