Used Upper Piston Press for sale (16,055)

Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Nkedjytcd Ropfx Ah Rjw Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Nkedeyqw Sqspfx Ah Rew Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 721359, color channels: CMYK, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 36 mm, paper height (max.): 52 mm, Heidelberg Printmaster GTO 52-4 Offset Printing Machine (2006) For sale: Heidelberg Printmaster GTO 52-4, a reliable and high-quality 4-color offset printing machine manufactured in Germany. Model: GTO 52-4 Year: 2006 Serial Number: 721359 Configuration: 4-color (CMYK) Location: Azerbaijan Condition: Machine is in excellent working condition. Fully operational and well maintained. All new photos and videos are available. The machine is ready for inspection and testing at any time. Technical Specifications: Format: B3 (max sheet size 360 × 520 mm) Max print area: approx. 340 × 505 mm Speed: up to 8,000 sheets per hour Paper thickness range: approx. 0.03 – 0.4 mm Equipment and Features: Alcolor dampening system Manual plate clamping system Nkjdpfx Aoyvdbpjh Rew Heidelberg inking unit with oscillating rollers Stream feeder with double-sheet control High pile delivery Powder spray unit Mechanical control system (simple, reliable, low maintenance) ink remote control Classic Center, single sheet feeder photoelectron. double sheet control, DDS film dampenings cooling unit Technotrans Alpha, quick plate clamping bars dry sprayer, + version Applications: Suitable for a wide range of commercial printing jobs including brochures, flyers, catalogs, business cards and other promotional materials.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new Nsdoyunphepfx Ah Rjkw 1) Amada TP45FX 2) PATEC 110ton press with recoiler

Condition: like new (used), Year of construction: 1985, operating hours: 200 h, functionality: limited functionality, machine/vehicle number: 38754, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Nkedpfx Asykl Iaeh Row Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving Nsdowfwkqspfx Ah Rskw - Automatically control pressing force.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation Njdpowfwkwsfx Ah Rekw -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: used, functionality: fully functional, Year of construction: 2012, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Nkedpfxoyxp Eye Ah Rew Distance between uprights: 2600 mm Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Working speed: 11 mm/s Return speed: 100 mm/s Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1962, Hydraulic press 160 t Nkedpfx Aeyxnb Hsh Rew

Condition: used, Hydraulic press by UVA Nksdpfx Aeyxnbgjh Row

Condition: used, Eccentric press by PELS Nsdpfx Aeyxna Nsh Rokw

Condition: used, Hydraulic press by UVA Nksdsyxnavepfx Ah Rjw

Condition: used, Double disc press 520 t Nodpfx Aeyxm U Ssh Rekw

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Nedpfsrfx Utjx Ah Rokw Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Manufacturer: TRUMPF Model: TruBend 5085 Year of manufacture: 2008 Nedpfjyxdv Hex Ah Rjkw Product number: F1025K Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm Nkodpfx Ahjywgyle Rsw 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm Nodpfxokw Rbae Ah Rokw stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Front light curtain Siemem control Weight 12,5to

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air. Nsdpsywdtvsfx Ah Rokw

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Controlled by an electric foot pedal. Waste is directed to an external sleeve. The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions. Nedpfx Aoywdqzoh Rjkw

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Nedpsywdn Tofx Ah Rjkw Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: good (used), Sperr & Lechner SL II A-100 Hydraulic Bookbinding Press Ready for operation. The machine is like new. The press has a built-in hydraulic unit. Nkjdpfxjywdmve Ah Rjw Piston rod area (main plate): 580x440mm Single piston rod area: 440x280mm. Irreplaceable in bookbinding for the production of books, pads, etc. Weight: 600kg. 380V power supply. Made in Germany.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Nsdeywdmpopfx Ah Rekw Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, Year of construction: 1988, Max. pressing force: 1,600 kN Main drive: 30 kW Speeds: Rapid down I: 290 mm/sec Rapid down II: 130 mm/sec Working down I: 39 mm/sec Working down II: 17 mm/sec Rapid up I: 290 mm/sec Rapid up II: 130 mm/sec Nksdpfx Asyxqt Sjh Row Alternatively, infinitely variable drive: Drive power: 37 kW Rapid down, variable: 360 mm/sec Working down, variable: 23–48 mm/sec Rapid up, variable: 360 mm/sec Ram stroke, max.: 150 mm Max. installation height: 450 mm Ram area: 700 × 700 mm Table area: 700 × 700 mm Table through-hole Ø: 180 / 150 mm Clear spacing between uprights (front): 750 mm Clear spacing between uprights (side): 250 mm Table height above floor: 850 mm Ram bore Ø H7: 60 mm T-slots in table and ram H12 (DIN 650): 22 mm T-slot arrangement: to be defined Machine footprint, approx.: 1,500 × 1,700 mm Machine height, approx.: 3,150 mm Machine weight, approx.: 14,000 kg

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN Njdpfxjlqwvkj Ah Rskw CNC Back Gauge Quick Change Tooling

Condition: used, Year of construction: 2015, Eight-color offset printing press with perfecting device for double-sided printing, sheet format 75 x 106 cm, model HEIDELBERG SPEEDMASTER XL 106-8-P Year of manufacture: 2015 Nodpfjyv A Hfjx Ah Rekw Impressions: 230 million