Used Vertical Machine Center for sale (72,363)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Tool change optimization, Pedpjy T Iwqjfx Airorc Tool and material database, X-axis bearing likely defective.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Pjdpjzc Icwofx Airorc Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Pjdpfx Aiezpynkjrorc Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, SPINNER VC 750 – Year of manufacture 2017 Manufacturer: SPINNER Type: VC 750 Machine type: Vertical CNC machining center Control system: Siemens Sinumerik 840D sl / ShopMill Axes: 3 Predpfx Aoz Rzzyjiroc Working area: Travel in X-axis: 760 mm Travel in Y-axis: 460 mm Travel in Z-axis: 460 mm Table clamping area: 900 × 410 mm Max. table load: 350 kg Stiens Werkzeugmaschinen Main spindle: Max. spindle speed: 12,000 rpm Tool holder: SK 40 Spindle drive: approximately 11 kW or 17/10 kW, depending on the configuration Rapid traverse rate X/Y/Z: 36 m/min Industry Pilot Tool changer: Tool positions: 24; also 32 in certain configurations Tool changer: Dual-arm rapid tool changer Max. tool diameter: approx. 130 mm Max. tool length: approx. 200 mm Max. tool weight: approx. 8 kg Stiens Werkzeugmaschinen Machine data: Machine weight: approximately 3,300–4,000 kg, depending on the configuration Dimensions: approximately 2,590 × 1,700 × 2,825 mm (without considering different accessory configurations) Coolant system and chip conveyor

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system Predpexw Tqzefx Airjc # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Predpfsxgk Nmex Airec Spindle 12,000rpm Taper : BT40 ATC 30

Condition: used, Year of construction: 2023, functionality: fully functional, AKIRA SEIKI SR3XP 2023.02 BT40/11000 RPM LINEAR GUIDE 760-430-460 MM MITSUBISHI M845 CONTROL Pjdpfx Aj Afpf Usirsrc MACHINE CAN BE INSPECTED AT OUR ISTANBUL WAREHOUSE.

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1050 x 530 x 510mm, Table 1300 x 550mm, Prodpfx Aijz Sqwmerjc Spindle speed 0 - 12000 rpm, Spindle taper Din 40, Spindle Motor 18.5kW, 30 station ATC, Mazak Matrix Nexus 2 control, swarf conveyor, coolant, Low Volt light

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: Predsyy Npnepfx Airec • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Prjdpfxex Ehi Ie Airoc Additional Details: With Nikken 170 4th Axis

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Psdpfxevc Avbj Airorc Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Pedpfx Aie Admbqjrorc Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: excellent (used), Year of construction: 2011, Winmax control Prsdpfxe Adl Rde Airjc Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Prodez I Du Ajpfx Airjc Complete with manuals and CE certificate.

Condition: used, Year of construction: 2016, WEEKE OPTIMAT BHX 055, manufactured in 2016 according to the nameplate. Compact vertical CNC machining center for drilling and milling of wood-based materials. Equipment: Pedj Advkhspfx Airerc - CNC-controlled vertical machining - Drilling unit and milling spindle - Tool changer - woodWOP 7.0 - Operation via screen control Main usage according to meter reading photo from July 27, 2026: approximately 4,563 hours. This figure refers to the main usage, not the total operating time. Location: Germany. Further technical data and scope of supply available upon request. Photos show the machine offered. Price on request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Spinner MCV 610, Year of manufacture: 2007, Prsdpfx Aiszt Iuyorec Control system: Siemens Sinumerik 840 D, Travel range X/Y/Z: 610/500/500 mm, Spindle speed: up to 10,000 rpm, Spindle taper: SK 40, Tool changer: 24 positions, Table size: 1000 x 600 mm.

Condition: used, functionality: limited functionality, The following are offered: Podpfxszzavro Airerc OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot positions for the Erowa clamping system: 70 positions (workpiece changer) Robot positions for pallet changing: 8 positions The robot is currently not in operation due to a fault. However, this can be repaired so that it functions normally again.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1054447, controller manufacturer: Haas, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HAAS VF2-SS CNC milling machine with a rotary-tilting table (5-axis) in excellent condition (only minor paint defects in the interior). Chip conveyor, up to 25 tools can be used simultaneously in the machine (24 in the tool changer + 1 in the spindle), spindle SK40. Renishaw probing system with wireless communication. Prsdpe Ab Altjfx Airjc Includes a wide range of accessories (chuck, mandrels, hydraulic collet chuck on the dividing head, center clamp, collets, etc.). Complete documentation. This machine has been operating flawlessly and reliably until its last use and is only being sold due to the closure of our business!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Prjdpfx Aisz Ihxleroc Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 460 mm Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm travel -y axis 670 mm Prsdpo Adfluofx Airec travel -z axis 625 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2009, functionality: limited functionality, machine/vehicle number: B-8023, Technical characteristics: Psdpoxxi Skofx Airorc # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th Axis # Rapid traverse speed: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock features: # Spindle distance: 200 mm # Maximum distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal cooling), Tool Holder (Size 40) # Speed range (standard): 100/8,000 rpm, Max torque: 85 Nm at 330 rpm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: Sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. Tool change time (fastest): 3 s. Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # 4th axis: Nikken CNC180 FA (2012) # Broken tool detection system: Blum Novotechnik # Chip extractor # Lubrication system # Electrical panel cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine condition: OPERATIONAL — with 1 spindle / 2nd spindle defective — can be repaired.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm TAPER: BT30 X-Y RAPIDS: 48.0m/min Prodpfsz R T D Uex Airec Z RAPID: 56.0m/min MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, overall weight: 10,500 kg, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 54, SPINNER U5-1530 Advanced 5-axis simultaneous machining Prsdpjzl Eznsfx Airjc Spindle: SK40 Tool magazine capacity: 54 Coolant pressure: 70 bar Control system: SINUMERIK 840D sl Bellows renewed (new generation) Tool changer door renewed Tool changer motor renewed Good condition

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 Psdpfxjxx A Ewe Airjrc spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: good (used), functionality: fully functional, Machine with only 3.311 spindle running hours ! * Heidenhain iTNC 530 CNC control * 32-station ATC * Internal coolant system: 20 bar * Coolant tank: 480 l * Chip conveyor * Heidenhain glass scales in X/Y/Z * Oil-cooler * Infrared measuring device Technical details x-travel 1100 mm y-travel 600 mm z-travel 510 mm Table dimensions 1300 x 600 mm table load 1,0 to tool taper ISO 40 DIN 69871A spindle turning speed range 60 - 12000 rpm rapid traverse 32 m/min power capacity 10 / 17 kW no. of tools in the magazine 32 tool length - max. 300 mm Tool diameter 76 / 127 mm weight of tools max. 8 kg tool changing time 2,5 sec total power requirement 30 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4400 x 2250 x 2920 mm Prjdpfx Ajz D A Hceirec