Used Vertical Machine Center for sale (72,296)

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm OSP200, Fusion360 IGF Iijdszzbk Rjpfx Ahnog Coolant through spindle 4th axis Kitagawa 250mm Available immediately In very good condition

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 CNC control Siemens 24-position tool changer chip tray Technical data: X-axis travel: 610 mm Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Iiedpfxewwi H Is Ahnog Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Technical data, accessories, and machine description are non-binding.

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Iijdjzv Sk Rjpfx Ahnsg Technical data: X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Constant power at standard version from: 1,500 min⁻¹ FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Condition: good (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, 30 BT-40 tool magazines. Spindle and axis movements are very quiet. Fully functional, regularly used and maintained. Complete documentation is available! For more information and videos, please contact me privately. Ijdpfsyr D Axsx Ahnsig

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Type C 600 V Year 1998 Iiedpfxezxpp Aj Ahnjg CNC Heidenhain TNC

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,982 h, functionality: fully functional, Haas VF-8/40, year of manufacture 2008 The machine was purchased in 2008, is fully functional, and can still be used as normal. All tools and accessories are included. Further technical details can be found in the attached images. Viewings can be arranged by appointment if interested. Iijdsxcvz Hjpfx Ahnsg

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder Ijdpfoyanlajx Ahnoig - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: excellent (used), Year of construction: 2014, Vertical machining center HWACHEON Vesta-1000 10K Control system: Heidenhain iTNC 620 Year of manufacture: 2014 Internal machine number: 43 Travel distances: X-axis: 1,000 mm Y-axis: 550 mm Z-axis: 500 mm Table size: 1,100 x 502 mm Table load: approx. 700 kg Iijdsyliknjpfx Ahnsg Tool holder: BT 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Drive power: 18.5 kW Equipment: Chip conveyor Electronic handwheel 4th axis

Condition: excellent (used), Year of construction: 2012, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of manufacture: 2012 Internal machine no.: 5 Travel paths: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping surface: 2,900 x 750 mm Pendulum machining: 2 x 945 x 800 mm Table load: approx. 2,800 kg Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 30 - 8,000 rpm Equipment: Chip conveyor Ijdpfx Ahoylid Uenoig Paper band filter unit Handwheel HR410 Machine enclosure 2x LTA extraction systems Partition wall Pickup magazine for angle heads

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Iiodpfx Ajy S U Dushneg

Condition: used, functionality: limited functionality, The following are offered: Iodpfxszzavre Ahnoig OPS 650 (5-axis): Tool changer with 40 positions for HSK E40 OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot stations for the Erowa clamping system: 70 positions (workpiece changer) Robot stations for pallet changing: 8 positions The robot is currently not in operation due to a malfunction. However, this can be repaired so that it functions normally again. The cooling unit for the 650 machine is external.

Condition: used, Year of construction: 2008, Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible. Iiodpfxjzzqbro Ahnsg

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of manufacture: 2005 Isdpoy Ryw Dofx Ahnjig Internal machine no.: 59 Travel distances: X-axis: 2,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping surface: 3,220 x 1,000 mm Table load capacity: approx. 3,000 kg Spindle taper: SK 50 Tool magazine: 30 stations Spindle speed: 20 - 5,000 rpm Accessories - Coolant filtration system 900 l - Internal cooling - Chip conveyor - Electronic handwheel - Partition for pendulum machining - Magnetic chuck 2x 1,000 x 800 mm - Table probe TS27R - Prepared for touch probe

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 Iiedpjzv Syfjfx Ahnjg The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iijdpfx Aoyw Tm Eehnjg Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, functionality: fully functional, Machine partially overhauled by Willemin with new geometry. Ready for production. Country of origin: CH (Switzerland) Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Isdpew T Tk Iefx Ahnjig Control: Fanuc 31i A5 X Axis: 450 mm Y Axis: 200 mm Z Axis: 425 mm B Axis: -45° to +100° U Axis: 300 mm Tool magazine: 48 stations PickUp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motorized spindle: HSK40E, MAX 30,000 rpm Subject to error or omission, technical data provided without obligation.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Isdpfx Asw T Tlrehneig Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: excellent (used), Homag Drillteq 050, vertical CNC drilling and milling center Working area: Length X: 3050 mm Width Y: 850 mm Iiedpozx S Nfjfx Ahnjg Thickness Z: 60 mm 5kW milling spindle 8 vertical drilling spindles, 6 horizontal drills (4 drills on the X-axis, 2 drills on the Y-axis), Saw blade for X-axis grooving, Software: Homag Woodwop 7.1 Machine in very good condition, Year: 2019 Few hours of operation CE marking Weight: 1750 kg

Condition: used, Year of construction: 2016, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,800 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,680 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MTcut V110, 15th unit Year of manufacture: 2016 Heidenhain iTNC 530 control system Spindle speed up to 15,000 rpm 60-position tool changer, SK40 Chip conveyor Iisdezphdaepfx Ahneg Total operating hours: 26,882 Spindle hours: 3,106

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 143773, Controller: Mazatrol PC-Fusion CNC 640 M Iisdpfxexlr Uzs Ahnjg X = 1120 mm Y = 510 mm Z = 510 mm Table size: 1460 x 510 mm Table capacity: 800 kg Machine dimensions: L = 3312 x W = 2850 x H = 2760 mm Machine weight: 6100 kg.

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table load: 800 kg, rotational speed (max.): 10,000 rpm, Equipment: chip conveyor, Tool holder: SK 40 (DIN 69871) Iisdpfx Aoy Nif Uohneg Number of positions: 30 tools Through-spindle coolant (IKZ)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor Iodpfxjzt Nlms Ahnjig HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. Iodox E Twaopfx Ahnjig Inkluded loading on truck All information provided without guarantee

Condition: excellent (used), Year of construction: 2014, Controller WIMNAX V09 (DSM) Table size 2184 x 865 mm T-slots in table 7 x 18 x 125 mm Table load max. 2268 kgs X travel 2134 mm Y travel 864 mm Z travel 762 mm Spindle speed 12000 rpm Isdopiaqxopfx Ahnoig Spindle power 18 kW Tool holder type SK40 ATC magazin 40-fold Max tool dia. 74.9 mm Max tool length 300 mm Max tool weight 7 kgs Rapid speeds X/Y/Z = 18, 18, 13.5 m/min Weight 17000 kgs Dimensions LxWxH = 7570 x 4450 x 3260 mm Accessories, features - Coolant device - DXF, NCPP, ISNC, Herical, rigid tapping, pocket/islands options - CTS 20 bar - Spindle cooler - Chip conveyors - Manuals Very good condition. Ready to sale immediately. The tools are not in with the machine.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller FANUC Series 18i-MB Table size 1300 x 650 mm Table load 1500 kgs Iedpfxeuu Rzrj Ahnsig X travel 1100 mm Y travel 650 mm Z travel 600 mm Spindle speed 12000 rpm Tool holder type MAS BT40 ATC magazin 30-fold Weight 7200 kgs Dimensions LxWxH = 3100 x 2300 x 3100 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.