Used Vertical Turning Center for sale (22,734)

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools Kedpfx Adowg D Thjwjll MAPPS4/MSX-853 IV control system

Condition: used, Year of construction: 2001, rpm 18.000 - 24.000 X axe 4 000 mm Kedpox Uqr Tofx Adwsll Y axe 1 400 mm Z axe 800 mm Machine dimensions 6400 mm x 2600 mm x 3800 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, Main Drive Number of axis 3 Spindle Speed 6000 RPM Kledpfxjx S Skre Adwsl Spindle motor power 18.1 kW Movement X-Axis Movement 650 mm Z-Axis Movement 375 mm Y-Axis Movement 50 mm This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Kljdpfxjxgk Nmo Adwjl Control : Heidenhian Spindle 12,000rpm Taper : BT40 ATC 30 Immediate Delivery

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Kjdpfox Tti Sjx Adwsll Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2004, x-travel 1.500 mm y-travel 700 mm z-travel 700 mm control FAGOR 8055 MC table-size 1.725 x 650 mm table weight 1.000 Kg Kledjxtfzdopfx Adwel T-slots 6 x 18 x 100 mm rapid traverse 30.000 mm/min distance spindle /table 190-890 mm taper iso 40 DIN 69871 number of spindle speeds 10.000 U/min/rpm Spindle power 25/34 kW total power requirement 57 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,683 x 3,750 x 3,335 m -Working acceleration 3 m/s² -Distance from axle to column 690 mm. -Min.-Max. Distance from the center of the table to the column 340-1,040 mm. -Automatic tool changer: -Type of tool change Random bidirectional -Positions in magazine 24 -Maximum diameter with adjacent/free positions 77/130 mm. -Maximum tool length 300 mm. -Maximum weight of 1 tool / total weight 7 / 120 kg -Tool change 2 s.

Condition: used, Year of construction: 2015, x-travel 1.200 mm y-travel 600 mm z-travel 675 mm Control C 620 HSCI FS table-size 1.220 x 620 mm 40 fach Kedpfx Adjx Ak Hdewell Distance between table and spindle 735 mm turning speeds 10.000 U/min spindle drive 18 kW Internal cooling system 30 bar -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED.

Condition: good (used), Year of construction: 2014, operating hours: 23,816 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: SIEMENS 840D, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Travel paths (XYZ): 850x560x510 mm, max. spindle speed: 12,000 rpm, 60-position tool changer SK40, control: SIEMENS 840D, 1 chip conveyor, internal coolant supply. Klodpfx Adjyazhnowel NOTE: We offer flexible financing solutions for all machines, as well as a professional relocation service. Disassembly, transport, and expert installation – all from a single source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: good (used), Year of construction: 2005, operating hours: 29,850 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 800 kg, rotary table diameter: 950 mm, spindle speed (min.): 18,000 rpm, operating hours of spindle: 24,575 h, Equipment: chip conveyor, Internal coolant supply Chip conveyor Tool measurement Touch probe Kledeyazgkjpfx Adwjl 18,000 rpm 30-position tool changer Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and proper installation – all from one source. Invoicing based on individual terms and duration. Contact us for your personal offer.

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (min.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Kedpfeyazdpox Adwell Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Kjdpfxeyay D Uo Adwell Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Klodpfx Adsyaywbewel Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Kledpfx Adou U R E Ajwsl

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Ksdpfx Adsw I Hzpowoll Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.

Condition: good (used), Year of construction: 2018, 1 used 3-axis CNC machining centre, make HURCO, model VMX 84 I, year 2018, S/N S84916201C8FFBCA, XYZ travels 2,135x865x762 mm, max. spindle speed 12,000 rpm, 90-position tool changer, machine weight approx. 17,570 kg, mobile operator platform, chip conveyor, coolant unit. Kedpeya Up Sofx Adwjll

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm Kledpfxjxgicle Adwsl z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. auto power on hours ca. 80.015 h spindle hours ca. 58.434 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, Klsdpfx Adsxryb Newsl tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.

Condition: good (used), Year of construction: 1998, table diameter 1800 mm Kedew H Dkmjpfx Adwjll turning diameter 2060 mm swing diameter 2000 mm work height max. 1557 mm power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 with Grinding device

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Kljdpfx Aewmxfledwel Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: like new (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm weight of the machine ca. 6500 kg required space 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of Manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, ideally suited for high-accuracy machining of complex workpieces. With its robust construction, high-performance spindle, and reliable Heidenhain control system, it meets the highest standards in both single-part and series production. All specifications are provided without guarantee. Exact technical details will be provided at the time of purchase. Control system: TNC 426/430 Travel Paths X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool holder: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Ksdswmzgfopfx Adwell Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 410 mm, table length: 900 mm, table load: 350 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Vertical machining center Spinner VC 750 from training facility Year of manufacture: 2019 Control: Sinumerik 840D Technical specifications Spindle speed: 10 - 12,000 rpm Drive power: 11/17 kW Tool holder: SK 40 Number of magazine positions: 24 Table size: 900 x 410 mm Travel distances: X-axis: 750 mm Y-axis: 460 mm Z-axis: 460 mm Kjdpfx Aeya H Tcjdwsll Equipment: Electronic handwheel Coolant system (KSS) Chip conveyor Prepared for 3D probe – receiver available

Condition: used, Year of construction: 2009, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Siemens ergoline table surface area 2x 790 x 560 mm Kljdpfx Adstxctvowsl number of pallets 2 rapid traverse 30 m/min turning speed range 8000 U/min power capacity - milling spindle 13 kW no. of tools in the magazine 30 Stück tool taper SK 40 | | weight 5,2 t dimensions 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Fanuc control, milling spindle, turret, sub-spindle, chip conveyor, Blum probe, robot, short loader, tool holder package. Commissioning 01.2025. Kljdpfeya I D Njx Adwel

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Kljdpfx Adox Iwb Iswol Year of manufacture: 2015 Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) Klodpfxjya Hngs Adwel MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software