Wide planer

Rex TIMBERWORK

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar Pjdpfx Afjw Dp Ufjhspl - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Ppjdpjudxchsfx Afhol Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Year of construction: 2025, condition: new, The Unstacker Ppjdshbr Ufepfx Afhol Fully automatic destacker Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours)

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Pjdsmidtrepfx Afhopl Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Pjdpfomgc I Njx Afhjpl Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Ppjdpfx Ajxqggcefhjl Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Aquablast Vixen 1215 With closed system Manufacturer: VIXEN Ppsdpfow Hc Hyex Afhol Model: Aquablast 1215

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) Pjdpfx Aoiwaxnjfhjpl all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm Psdst R T Hcepfx Afhspl 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg Pjdpfxefv Atts Afhjpl height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m