Used Wire Binding Machine for sale (94,889)

Condition: used, Year of construction: 2004, Travel path: X 500 mm Y 350 mm Z 300 mm incl. cooler Bsdpfx Aow Emfdobzjww incl. large wire spools

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Bjdpfx Aow Ucyuebzoww Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Bsdpfx Ajvf Hhyebzoww Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Bwedpfx Abewtd Edozow

Year of construction: 2016, operating hours: 9,606 h, condition: ready for operation (used), General Data Machine weight 4690 kg Main Drive Number of axis 5 Bwjdpfxsv Ir Ahj Abzjw Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm V-Axis Movement ± 50 mm U-Axis Movement ± 50 mm Workpiece Workpiece weight 1000 kg This 5-axis +GF+ Agie Charmilles CUT 30P wire EDM machine was manufactured in 2016. Ideal for precision cutting, it offers advanced control features and robust construction. Consider the opportunity to buy this +GF+ Agie Charmilles CUT 30P wire EDM machine. Contact us for more information. Application Types EDM

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 Bwjdpfoxf I D Esx Abzew automatic wire threading can be seen in good working condition year 2002

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Bsdpjwt N Uqefx Abzeww More pictures and data will follow shortly.

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Bjdpexbm Uzsfx Abzsww Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: used, Year of construction: 2002, functionality: fully functional, Automatic Wire-O-Punching Machine, WireBind, Including 5 Dies Bwsdpfx Aoxdnhuebzew

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Bedpfx Abow Rqu Sjzoww

Condition: good (used), Year of construction: 2005, Straight and cut machine Bodpfxspxnv De Abzsww Brand - RAVNI ( France ) Min/Max wire diam. - 4- 10 mm Max cutting length - 6 meters Construction year - 2005.

Condition: refurbished (used), Year of construction: 1980, Technical Details : Year - 1980/ 2020 reconditioned Speed - 7m/sec. Number of blocks - 7 Input wire diameter - 5,5 mm Output wire diameter - 2,0 mm Line Consits : - Decoiler Bwsdpfx Ajw Dpqgsbzow - Mechanical descaling and brushing - Wire drawing machine 7 blocks - Coil winder for coils up to 800 kg ( Vertical and horizontal spooler )

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Bedpoha U I Djfx Abzjww Please ask if you are interested !

Condition: new, Year of construction: 2023, machine/vehicle number: P7YXXX, SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. Bjdpfjhukfmjx Abzsww The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 4,985 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 800 mm, A DEMO machine from our TOOL SHOP in Sofia, Bulgaria. Table length: 640 mm Table width: 540 mm Maximum workpiece dimensions: 810 x 700 x 215 mm Travel distances (X / Y / Z): 400 x 300 x 220 mm V-axis: 120 mm U-axis: 120 mm Maximum workpiece weight: 500 kg Control: M800 D-CUBES Wire diameter: 0.1 - 0.3 mm Machine weight: approx. 3.1 t Space requirement: approx. 2.8 x 2.1 x 2.1 m Machine construction: Hybrid design Machine includes: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes Bodsw Ni Tqopfx Abzeww - Collision protection for XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole detection - Easy 3D setup for workpiece position detection - 5 controlled axes, prepared for additional axes - PFC – Precise Finish Circuit - H-FS – Fine finishing mode - LLS – Long Life System - 10 kg wire station - 4-sided frame table, hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric Control M800 D-CUBES: - 19" full-touch monitor with gesture control - Hand pendant with configurable LCD display - Job planner including job interruption function

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1050, IN ADDITION TO THE MACHINE, THERE ARE: KOLBUS ZU 840 SIGNATURE COLLECTOR, 4 STREAMFEEDER MOD. OMG LOADERS COMPLETE WITH CLAMPS, 1 MULLER MARTINI LOADER, BOOK BLOCK FEEDER WITH LEFT-HAND LOADING, RAISING DEVICE, AMBAFLEX TOWER MOD. SV-400-1800-HS. THE MACHINE IS WORKING AND CAN BE CHECKED AT OUR OFFICE IN MALALBERGO (BO), BY APPOINTMENT. Bwsdpsv Rp Nqsfx Abzow

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bodpfx Abswhf Hfezsww Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 1991, Technical Details : Year - 1991 Bwjdpfx Asw Dpm Uebzjw Speed - 20 m/sec Number of Blocks - 13 +1 El. Power - 13x55 Kw , 1x60 Kw,1x55 Kw Danser arms Inlet wire - max. 7 mm ( height and low Carbon ) Output wire - 1,2 - 2,4 mm Condition - excellent - Refreshed in 2020 Line consists : - Mechanical wire pay off - Mechanical wire cleaning unit - Line with 13+1 blocks - wertical dead block + Horizonttayl unwinding unit

Condition: good (used), Year of construction: 1996, Wire EDM machine MATRA ROBOCUT CX-OC X 320mm/900 mm Y220 mm/900MM U120 mm/450 mm V120mm/450mm Z180mm/450mm Fanuc control LTD Bedpfx Abeucf I Uszjww Machine weight 1.5 tons

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg Bwedpfxew Hxqns Abzew The machine was in operation with our customer until recently and is available immediately.

Condition: used, Year of construction: 1993, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 116 mm, workpiece height (max.): 150 mm, workpiece width (max.): 990 mm, workpiece length (max.): 505 mm, table width: 420 mm, table load: 500 kg, Equipment: cooling unit, documentation/manual, Taken out of production in working condition, removed due to the purchase of a new machine. Bwedpfx Abjwu Shpozsw The machine is currently disconnected and dismantled in our warehouse. All cables are numbered and photographed; these can be shared after payment for the machine to ensure correct installation at the new location.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Bwodpfowl Hiisx Abzew Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Bwsdpfow Tfhfex Abzjw Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM

Condition: good (used), Year of construction: 2011, functionality: fully functional, section length (min.): 100 mm, section length (max.): 3,500 mm, wire diameter (max.): 5 mm, type of input current: three-phase, For sale: Used WAFIOS RS4 wire straightening machine in good condition. Bodpfow U Eubox Abzjww Technical data: • Model: RS4 • Manufacturer: WAFIOS • Straightening range: 3 to 6 mm • Equipment: incl. blades, straightening stones, various feed rollers (mm), decoiler • Year of manufacture: 2011 Condition: • Fully functional, regularly maintained Location: 74931 Lobbach Price: €12,000 net

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg Bodjw Htdpjpfx Abzsww The machine was in use with our customer until recently and is available for immediate delivery.