Used Woodcracker C 350 for sale (20,214)

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time Itjdex Eabpepfx Aanjr All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: new, SEW R47 DRN80M4/BE1HR/TF/EI7C/C / 01.7493730502.0001.17 gear motor with SEW 13000063 brake control, unused, 100% functional, scope of delivery as per photos Ijdpfxsu Ai Eyj Aanotr

Condition: used, Year of construction: 2007, Technical details: Isdpjx Aq E Hjfx Aanstr faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: new, Year of construction: 2026, rotary table diameter: 2,500 mm, Control: Siemens One Itjdjcxyn Tepfx Aansr Table diameter: Ø2500 mm Max. swing diameter: Ø3000 mm Max. turning diameter: Ø2800 mm Max. turning height: 1600 mm (option: 2000 mm, 2200 mm) Max. workpiece height: 1800 mm Max. workpiece weight: 15,000 kg Automatic tool changer: number of positions 16 (24, 32, 48, 60) Table drive: 85/128 kW, optional master-slave drive Driven tools: 11/15 kW Space requirement (LxWxH): 6835x5080x6400 mm Machine weight: 56,000 kg 24 months warranty (free annual inspection during the warranty period), geometric accuracy guarantee as at commissioning – 5 years, 5-year cross roller bearing warranty Detailed quotation on request.

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Iodpfeh Eilvox Aanetr Max. Temperature 70°C

Condition: used, mileage: 56,650 km, power: 120 kW (163.15 HP), first registration: 07/2023, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,420 mm, loading space width: 1,520 mm, loading space height: 1,220 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 72 – You will find this and many other inspected Mercedes Benz transporters on our website: ---Very well-maintained Mercedes-Benz Vito 116 CDI, refrigerated box van for fresh goods, from first owner. High-quality conversion by Winter, equipped with a Webasto FT 10 cooling unit. Temperature range +2°C to +30°C. Both drive and stationary cooling are possible. Additionally, a temperature recorder is installed in the vehicle. Visually and mechanically, the vehicle is in very good condition. The Vito comes with extensive features.--- MOT (TÜV) NEW – valid until 08/2027. Furthermore, it comes with 4 new Continental all-season tires, new front and rear brake discs and brake pads, as well as a fresh oil and filter change. Service performed at 38,000 KM and 56,648 (12/2025). ---Highlights include: 9G-Tronic automatic transmission, rear-view camera, parking sensors front and rear, air conditioning, cruise control, 270° rear doors, heated seats, multifunction steering wheel adjustable in height and tilt, Audio System Audio 30, rain and light sensor, Easy Cargo package, external mirrors electrically adjustable and heated, two-way speakers (...). ---4 x all-season tires Permissible total weight: 2,800 kg Unladen weight: approx. 2,000 kg Payload: approx. 800 kg Towing capacity: 2,000 kg Emission standard: EURO 6d-Temp Wheelbase: 3,200 mm Load compartment (LxWxH, approx. in cm): 242 x 152 x 122 VIN: W1VVLBEZXP4243357 Warranty available with additional payment COC document available 2 keys ---* Mercedes-Benz Vito 116 CDI, first owner, very well-maintained overall condition, new MOT, new front and rear brakes, 4 new Continental all-season tires, fresh oil service * Winter refrigerated conversion, down to 2°C * Temperature recorder * Drive and stationary cooling * 9G-Tronic Plus automatic transmission * Rear-view camera * Front and rear parking sensors * Air conditioning Itjdpfx Aasx E I S Ejnsr * Audio System Audio 30 * Cruise control * Enlarged fuel tank * Rain and light sensor * Heated seats * Multifunction steering wheel, adjustable * Two-way speakers * Heated seats * On-board computer * Hands-free system * ASSYST service interval indicator * Electric windows * Central locking * And much more ---Subject to error, changes, and prior sale. Special features: Audio System Audio 30 (DAB, Bluetooth), externally adjustable & heated mirrors (both sides), DAB tuner (digital radio), automatic headlight activation, rear doors without glazing (opening angle 270 degrees), comfort lighting for passenger/load area, enlarged fuel tank, LED cargo area light, steering wheel (mechanically adjustable steering column), multifunction steering wheel including trip computer, Park Package, wipers with rain sensor, driver’s cab seats: front passenger seat as double seat, driver’s seat heated, sun visors with illuminated mirrors, heat-insulating glazing, two-way front speakers. Additional features: 3-button remote for central locking, third brake light, adaptive brake light, passenger airbag, driver’s airbag, hill-start assist, aspherical exterior mirrors (both sides), outside temperature display, roof rack mounting rails, BlueEfficiency package, brake assist, design & equipment line Base, Assistance system: Attention-Assist (drowsiness detection), roadside assistance system, crosswind assist, windshield with antenna, 200A alternator, speed limiter system 210 km/h, G-Tronic automatic transmission (9-speed), front cup holders, seatbelt tensioners, etc.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Ijdpfxex D Abpo Aanstr Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: used, maximum load weight: 25,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2001, loading space length: 7,330 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2001, Equipment: ABS, 2-axle Carnehl steel tipper body VIN: PC09163 Chassis / Attachments: * Air suspension * Landing legs * Tyres: 385/65 R 22.5 * Remaining tread: approx. 30% * 2 x SAF axles with disc brakes * Foldable underrun protection Itjdpexc Affofx Aanjr Body: * Steel tipper body / steel chassis * Volume: approx. 25 m³ * Load pressure gauge * Front-mounted hydraulic ram (Georg), max 250 bar * Rear chute 400 mm * Rear tailgate as pendulum gate, hydraulically opening upwards * Rear tailgate with 2 mechanical hook locks Weights: * Gross weight: 32,000 kg * Payload: 25,850 kg * Unladen weight: 6,150 kg Other: * German registration New main inspections / safety checks or changes to weight rating (downrating/uprating) are available upon request. We are also happy to assist you in obtaining export/transit license plates, and can arrange transport of your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typing errors, changes, prior sale and mistakes reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. Thanks to our many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the supply of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent, all-inclusive service package and provide them with a competent contact to support them in buying or selling vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you with the organization of special transports. Temporary/export plates We are happy to help you obtain export/temporary license plates. Handling customs formalities We are happy to assist you in handling customs formalities.

Condition: good (used), mileage: 2,99,126 km, power: 184 kW (250.17 HP), first registration: 01/2016, fuel type: diesel, tire size: 245/70R17.5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,250 mm, loading space width: 2,470 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: AdBlue, tail-lift, Renault D12.250 4x2 - Box Body - Tail Lift 1,500 KG - A/C - Euro 6 - Automatic - Camera System MY: 4-1-2016 KM: 299126 VF640J569FB001416 Box dimensions: 625 x 247 x 230 cm Tail lift 1,500 KG Air conditioning Euro 6 Automatic transmission Camera system = Further Information = Ijdpfxsxq Nrnj Aanjtr Tire size: 245/70R17.5 Front axle: Max. axle load: 4,480 kg; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf spring Rear axle: Twin tires; Max. axle load: 8,480 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50%; Suspension: air suspension Gross vehicle weight: 12,000 kg Tailboard: Rear flap, 1,500 kg Technical condition: good Visual condition: good Contact VAEX The Truck Traders for further information.

Condition: excellent (used), mileage: 8,57,572 km, power: 355 kW (482.67 HP), first registration: 01/2018, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Leaf suspension - Car kit - Roof hatch - Roof spoiler - Differential lock - Digital tachograph - High beam headlights - Speed limiter - Retarder - Air conditioning - Air suspension - Air-suspended seats - Particulate filter - Radio/CD player - Sleeper cab - Side door - Sideskirts - Sun visor - Lane departure warning system - Stability control - Auxiliary heater - Warm-up automatic system = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Steered; Tire tread left: 90%; Tire tread right: 80%; Suspension: Leaf suspension Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,336 kg Payload: 12,164 kg Gross vehicle weight: 20,500 kg Iedpfx Aasxu Ag Tenotr Maintenance, History, and Condition APK (Roadworthiness Inspection): valid until 01/2026 Technical condition: very good Visual condition: very good Identification Registration number: 13-BKJ-5

Condition: used, mileage: 1,41,742 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,030 mm, first registration: 08/2021, fuel tank capacity: 80 l, CO₂ emissions: 265 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, traction control, trailer coupling, General information Number of doors: 5 Model range: Jun 2019 - Jun 2021 Cab: single Technical information Itsdpexpvd Usfx Aansr Torque: 350 Nm Number of cylinders: 4 Engine capacity: 2.287 cc Transmission: 6 gears, Automatic Measures length/height: L3H2 Dimensions (LxBxH): 613 x 205 x 252 cm Weights Empty weight: 2.165 kg Carrying capacity: 1.175 kg GVW: 3.340 kg Interior Interior: black Consumption Average fuel consumption: 8,7 l/100km (32 MPG) Urban fuel consumption: 8,9 l/100km (32 MPG) Extra urban fuel consumption: 7,6 l/100km (37 MPG) Maintenance, history and condition APK (MOT): tested until 06/2026 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: used, Year of construction: 2006, operating hours: 16,043 h, * CRAWLER EXCAVATOR WITH HYDRAULIC FUNCTIONS, EQUIPPED WITH VERACHTERT DIGGING BUCKET (1.3 m³), QUICK COUPLER, CCU CONTROLLER, BMAIR OVERPRESSURE SYSTEM, AIR CONDITIONING, AND FRONT AND REAR CAMERA SYSTEM. CAB VERSION INCLUDES COMPLETE DOCUMENTATION SET WITH EC DECARATIONS, EQUIPMENT RECORD SHEET, AND MAINTENANCE HISTORY * SPECIFICATIONS: * MANUFACTURER: KOMATSU * MODEL: PC240LC-8 * SERIAL NO.: K50218 * YEAR OF MANUFACTURE: 2006 * ENGINE: KOMATSU SAA6D107E - 1.6 CYLINDER TURBO DIESEL * ENGINE POWER: 125 KW * FUEL TYPE: DIESEL * OPERATING HOURS (DISPLAYED): 16,043h * OPERATING WEIGHT: 25,290 kg * TRACK WIDTH: 900 mm * BUCKET DIMENSIONS (L x W x H): 2060 x 1300 x 1050 mm * MAXIMUM DIGGING DEPTH: 7,230 mm * MAXIMUM REACH: 10,970 mm * CAB: YES, WITH A/C AND JOYSTICK CONTROLS * BMAIR OVERPRESSURE SYSTEM: TYPE MA05, YEAR 2007, SERIAL NO. 9506101 * CCU CONTROLLER: INSTALLED (OUDE HENDRIKSMAN) * CAMERA SYSTEM: INSTALLED * DOCUMENTATION: COMPLETE SET AVAILABLE (KOMATSU & VERACHTERT EC DECLARATIONS, D.MONSHOUWER BV EQUIPMENT RECORD) Iodpfx Aaex Httqsnotr * TRANSPORT DIMENSIONS (APPROX.): 10 x 3.5 x 3.5 m CONDITION: * USED, FULLY FUNCTIONAL * VISIBLE WEAR CONSISTENT WITH AGE AND USAGE OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment only...) CONTACT DETAILS Phone: WhatsApp: Email: Export and customs license plates (export number) available from us. Subject to error and prior sale. Technical specifications and equipment details should be checked separately. Contractual condition is only that which has been inspected on site and confirmed in writing at the time of purchase. Please arrange an appointment...

Condition: excellent (used), CTS CTS CW-60/11 – Water-Cooled Climate Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for performing temperature and humidity testing on multiple specimens simultaneously. Device Description This climate test cell enables functional or material property testing of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculated air volume ensures optimal transfer conditions for the test specimens. The air conditioning section is located at the rear of the inner chamber. The system components are mounted in a separate frame behind the chamber for easy accessibility. Control electronics are housed in a discrete control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber can be performed via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm wall clearance - Temperature ramp rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 to ±5 % RH - Without thermal radiation - At equilibrium state Technical data assume ambient temperature of +25 °C, rated voltage 400 V, without test load, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable volume): - Volume: approx. 11,000 liters (11 m³) - Approximate internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Iedpfx Aaex Ankysnetr Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously variable output via electronic control and monitoring system - Eco-friendly refrigerants: R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier available – Costs & arrangements on request - Scope of delivery: (see picture) (Technical data subject to change and errors excepted.) Further questions can be answered by phone.

Condition: used, Year of construction: 1994, power: 4 kW (5.44 HP), Empty weight: 1.400 kg Itjdpfxox Ar Dwe Aansr Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available

Condition: excellent (used), Marel stainless steel 350 bandsaw in lovely condition. Perfect for factories cutting meat, fish blocks etc. Direct from closed UK fish company. Itodpjx Av R Ijfx Aaner

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Itjdpfx Aaex Atpbenor Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), mileage: 44,766 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 93 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, loading space length: 4,160 mm, loading space width: 1,650 mm, loading space height: 1,800 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, seat heater, sliding door, start-stop system, = Additional Options and Equipment = - 7-inch touchscreen - 12 Volt socket - 360° camera - Adaptive headlights - Alarm system - Outside temperature display - Heated mirrors - Heated side mirrors - Passenger airbag - Passenger bench seat - Cargo area lighting - Bluetooth - Car kit - Stability class 1 - DAB radio - Digital dashboard - Third brake light - Entry step rear bumper - EURO 6 - Driver airbag - Remote central locking - Cup holders - Height-adjustable steering wheel - Isofix - Keyless Go - Keyless start/go - Air conditioning - Front center armrest - Emergency call system - Parking sensors - Radio - Reversing camera - Voice control - Thermal glazing - Immobilizer - Two rear doors - Partition wall without window = Notes = Cooling unit brand: Carrier = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Front axle: Steering Weights Unladen weight: 2,670 kg Payload: 830 kg Gross vehicle weight: 3,500 kg Functionality Maximum cooling temperature: 29 °C Cooling motor: Diesel and electric Maintenance General inspection (APK): New TÜV upon delivery Condition Itodpfxox Hzkdo Aaner Technical condition: very good Visual condition: very good Damages: none Further Information Contact Lorenz Schoutteet for more information.

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2024, operating hours: 1,231 h, Equipment: air conditioning, General information Itsdpfjw U Itaex Aanjr Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.400 cc Steering: skid steer Make of engine: Bobcat Empty weight: 4.898 kg Dimensions (LxBxH): 390 x 186 x 206 cm Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: USA Condition CE type: CE bucket, Hydraulic Power Bobtach, 2-speed drive, Rear camera, High-flow hydraulics, Large display, Air-suspended seat

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request Itjdpex Anipsfx Aansr - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Itodpsdqzhhsfx Aanor Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: used, mileage: 1,56,918 km, power: 132 kW (179.47 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,100 mm, CO₂ emissions: 277 g/km, color: white, gearing type: automatic, number of seats: 5, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, onboard computer, = Additional Options and Equipment = - AdBlue system - Class I alarm system - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - Height-adjustable driver’s seat - Air conditioning - LED daytime running lights - Radio - Reversing camera - Immobilizer - Bluetooth phone connectivity - Partition wall = Additional Information = General Information Number of doors: 4 Model range: 2020 - 2023 Cab type: Double cab Technical Specifications Torque: 430 Nm Number of cylinders: 4 Engine displacement: 2,998 cc AdBlue system: Yes Transmission: 8-speed automatic Dimensions Itedpfx Asxnqicsanjr Length/Height: L4H1 Dimensions (L x W): 727 x 205 cm Weights Unladen weight: 2,681 kg Payload: 819 kg Gross vehicle weight: 3,500 kg Maximum towing capacity: 3,500 kg (750 kg unbraked) Environmental and Fuel Consumption Average fuel consumption: 10.5 l/100 km CO₂ emissions (NEDC): 277 g/km Emission class: Euro 6d-TEMP Maintenance APK (roadworthiness inspection): Valid until 05/2026 Product Safety EU representative: Iveco Nederland B.V. Hazeldonk 6465 4836 LH Breda, NL

Condition: good (used), mileage: 5,33,634 km, power: 353 kW (479.95 HP), first registration: 03/2010, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, AdBlue, air conditioning, central locking, crane, electric window regulation, power assisted steering, = Further Options and Accessories = - Brake booster - Speed limiter - Cabin - Air horn - Sun visor - Toolbox - Power take-off (PTO) = Further Information = Technical Information Transmission: I-Shift, automatic Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 28,080 kg Payload: 3,920 kg gross vehicle weight (GVW): 32,000 kg Functional Mast: Telescopic (8 sections) Mast length: 19.65 m Lifting capacity: 20,350 kg Body brand: EFFER 1355/8S CROS-STAB CE marking: yes Condition Technical condition: good Visual condition: good VOLVO FH 480 8X4 TRACTOR UNIT + EFFER 1355/8S CRANE EURO 5 L PACKAGE 480 HP DRIVE 8X4 WHEELBASE 510 CM AIR SUSPENSION Itedpfxox Eizue Aanor FH SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ADJUSTABLE FIFTH WHEEL TOOLBOXES EFFER 1355/8S OIL COOLER FOR CRANE HYDRAULICS TOTAL 8X HYDRAULIC EXTENSIONS MAX WORKING HEIGHT 23 METERS!! MAX LIFTING CAPACITY 20,350 KG MAX LIFTING CAPACITY AT 19.65 METERS 4,080 KG LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS TOTAL 4X OUTRIGGERS CRANE CAN WORK 100% IN FRONT OF THE CAB THANKS TO CROSSTAB OUTRIGGERS RADIO REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, mileage: 1,49,643 km, power: 79 kW (107.41 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 1,984 kg, maximum load weight: 616 kg, overall weight: 2,600 kg, axle configuration: 2 axles, wheelbase: 2,933 mm, next inspection (TÜV): 12/2027, color: white, driver cabin: day cab, gearing type: mechanical, number of seats: 3, Equipment: ABS, central locking, cruise control, electronic stability program (ESP), onboard computer, Emission standard: Euro 6 Engine power: 1,995 cm³ Transmission: 6-speed manual Axles: 4x2 Brakes: Disc brakes Cab: Multifunction steering wheel, tinted windows, electric windows, electric exterior mirrors, outside temperature display, audio system Refrigeration body: Deep-freeze, 1 door on the right, 2 rear doors Refrigeration unit: Carrier, INT 350 Tm 15, compressor-driven, cooling down to -20°C, with temperature recorder Additional features: Power steering, immobiliser Registration/documents: previously registered in Germany, fine particle emissions badge: 4 (green), emissions test valid until 12/2027 ID: 118169 Euro 6 Wheelbase: 2,933 mm Length: 4,972 mm, Width: 2,032 mm, Height: 1,964 mm Load length: 2,250 mm Cargo compartment LED lighting Manual transmission Carrier Xarios-350 refrigeration unit In-transit cooling AdBlue tank On-board computer Electronic Stability Program (ESP) Central locking with remote control Rear portal doors Right-hand sliding door Disc brakes Number of seats: 3 ASR/TC Heated exterior mirrors CD radio Cruise control Multifunction steering wheel Wheelbase: 2,933 mm 4 x new all-weather tyres Video 1: Video 2: We always have a large selection of used refrigerated and deep-freeze vehicles in stock. You can find more of our offers at Non-binding offer, sale to commercial customers only, errors and prior sale excepted Advertising and company logos on vehicles may have been digitally edited in photos. Iodpfxox Dfnrj Aanjtr

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Iedpfx Aex Ag R Ssanetr Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Itedoxzgn Ispfx Aaner Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.